Changes between Version 10 and Version 11 of WinAnacondaInstall


Ignore:
Timestamp:
Jan 8, 2020 11:23:50 PM (22 months ago)
Author:
toby
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WinAnacondaInstall

    v10 v11  
    11= Installing GSAS-II on Windows with Anaconda =
    22
    3 You will need to know if you are running 32- or 64-bit Windows (click here [http://windows.microsoft.com/en-us/windows7/find-out-32-or-64-bit if you are not sure]). Note that if you have 64-bit windows, you will likely find it easier to use [https://subversion.xray.aps.anl.gov/trac/pyGSAS/wiki/SingleStepWindowsNew this installer.]
     3You will need to know if you are running 32- or 64-bit Windows (click here [http://windows.microsoft.com/en-us/windows7/find-out-32-or-64-bit if you are not sure]). Note that if you have 64-bit windows (>=Windows-7), you will likely find it easier to use [https://subversion.xray.aps.anl.gov/trac/pyGSAS/wiki/SingleStepWindowsIllustrated this installer.]
    44
    5  1. Download the appropriate 64- or 32-bit Anaconda package from [https://store.continuum.io/cshop/anaconda/ Continuum Analytics, Inc. download page]. '''Important: make sure to use the Python 2.7 installer and to select the appropriate version, 32- or 64-bit, for your computer.''' (There is no cost for this, but Continuum will ask for your e-mail address.) Use of miniconda, which is much smaller, is also possible, but for that more packages must be installed.
     5 1. Download the appropriate 64- or 32-bit Anaconda package from [https://www.anaconda.com/distribution/ the download page]. '''Important: make sure to select the appropriate version, 32- or 64-bit, for your computer.''' Use of [https://docs.conda.io/en/latest/miniconda.html miniconda], which is much smaller, also works quite well.
    66
    7  You will download a file such as "Anaconda2-x.x.x-Windows-x86.exe" (32-bit) or "Anaconda2-x.x.x-Windows-x86_64.exe (64-bit), or Anaconda3- to use Python 3.x. If needed, click on the file you downloaded to run the installer. The following steps are then needed:
     7 You will download a file such as "Anaconda3-x.x.x-Windows-x86.exe" (32-bit) or "Anaconda3-x.x.x-Windows-x86_64.exe (64-bit), (or Anaconda2- to use Python 2.7 works, but is not encouraged). If needed, click on the file you downloaded to run the installer. The following steps are then needed:
    88
    99    a. Accept the copyright (end-user) agreement
     
    1212    d. Suggestion: leave "Add Anaconda to your path" and "Register Anaconda" unchecked, unless you plan to develop your own Python code.
    1313    c.   It then takes a few minutes to install Python.
    14     d. Once the software is installed, it is OK to un-check the boxes on the final "Thank you" screen. 
     14    d. Follow instructions to use the activate command
     15 
     16 2. Once Anaconda is installed, in the Windows Apps or "All Programs" menu, find the Anaconda menu and select "Anaconda Command Prompt" menu item.
     17You will need to install all [https://gsas-ii.readthedocs.io/en/latest/packages.html needed and recommended packages] which can be done with this command:
    1518
    16  2. Once Anaconda is installed, in the Windows Apps or "All Programs" menu, find the Anaconda2 menu and select "Anaconda Command Prompt" menu item. This will open a cmd (DOS) window. In that window type the following commands:
    1719
    18     `conda install wxpython`
     20     {{{
     21conda install wxpython svn pyopengl numpy scipy matplotlib pillow h5py imageio
     22}}}
    1923
    20     `conda install svn`
    21 
    22     `conda install pyopengl`
    23 
    24  After each command you will need to type "y" at the "Proceed?" prompt.
    25 
    26  I believe that this will install all [https://gsas-ii.readthedocs.io/en/latest/#required-packages needed and recommended packages], but it will not hurt to check this using this command:
    27 
    28      `conda install numpy scipy matplotlib pillow h5py imageio`
    29 
    30  If you used the miniconda installer, you must use this command.
    3124
    3225 3. Create a directory for GSAS-II and download the install script