Changes between Version 9 and Version 10 of WinAnacondaInstall


Ignore:
Timestamp:
Oct 12, 2018 8:57:46 AM (3 years ago)
Author:
toby
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WinAnacondaInstall

    v9 v10  
    33You will need to know if you are running 32- or 64-bit Windows (click here [http://windows.microsoft.com/en-us/windows7/find-out-32-or-64-bit if you are not sure]). Note that if you have 64-bit windows, you will likely find it easier to use [https://subversion.xray.aps.anl.gov/trac/pyGSAS/wiki/SingleStepWindowsNew this installer.]
    44
    5  1. Download the appropriate 64- or 32-bit Anaconda package from [https://store.continuum.io/cshop/anaconda/ Continuum Analytics, Inc. download page]. '''Important: make sure to use the Python 2.7 installer and to select the appropriate version, 32- or 64-bit, for your computer.''' (There is no cost for this, but Continuum will ask for your e-mail address.)
     5 1. Download the appropriate 64- or 32-bit Anaconda package from [https://store.continuum.io/cshop/anaconda/ Continuum Analytics, Inc. download page]. '''Important: make sure to use the Python 2.7 installer and to select the appropriate version, 32- or 64-bit, for your computer.''' (There is no cost for this, but Continuum will ask for your e-mail address.) Use of miniconda, which is much smaller, is also possible, but for that more packages must be installed.
    66
    7  You will download a file such as "Anaconda2-x.x.x-Windows-x86.exe" (32-bit) or "Anaconda2-x.x.x-Windows-x86_64.exe (64-bit). (If you downloaded Anaconda3-... you have downloaded the wrong file.) If needed, click on the file you downloaded to run the installer. The following steps are then needed:
     7 You will download a file such as "Anaconda2-x.x.x-Windows-x86.exe" (32-bit) or "Anaconda2-x.x.x-Windows-x86_64.exe (64-bit), or Anaconda3- to use Python 3.x. If needed, click on the file you downloaded to run the installer. The following steps are then needed:
    88
    99    a. Accept the copyright (end-user) agreement
     
    2323
    2424 After each command you will need to type "y" at the "Proceed?" prompt.
     25
     26 I believe that this will install all [https://gsas-ii.readthedocs.io/en/latest/#required-packages needed and recommended packages], but it will not hurt to check this using this command:
     27
     28     `conda install numpy scipy matplotlib pillow h5py imageio`
     29
     30 If you used the miniconda installer, you must use this command.
    2531
    2632 3. Create a directory for GSAS-II and download the install script