Changes between Version 5 and Version 6 of MacSingleStepInstallerFigs


Ignore:
Timestamp:
Mar 18, 2016 6:40:35 PM (7 years ago)
Author:
toby
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • MacSingleStepInstallerFigs

    v5 v6  
    66 Type "bash " into a terminal window, drag the downloaded file from a finder
    77
    8  [[Image(1.jpg, 60%)]]
     8 [[Image(1.jpg, 500)]]
    99
    1010 This places the file name with full path name into the terminal window, then press Enter.
    1111
    12  [[Image(2.jpg, 60%)]]
     12 [[Image(2.jpg, 400)]]
    1313
    1414
     
    5858
    5959
    60  [[Image(3.jpg, 60%)]]
     60 [[Image(3.jpg, 400)]]
    6161
    6262
     
    7777 2. Press enter to read through the copyright notice
    7878
    79  [[Image(4.jpg, 60%)]]
     79 [[Image(4.jpg, 400)]]
    8080
    8181 3. Type "```yes```" to accept the copyright information and start the installation.
    8282
    83  [[Image(5.jpg, 60%)]]
     83 [[Image(5.jpg, 400)]]
    8484
    8585
     
    9191 4. Enter a location for where the files should be loaded, if the default is not OK and press enter. If the default is OK, simply press enter. Note that no tests have been done with paths that contain spaces.
    9292
    93  [[Image(6.jpg, 60%)]]
     93 [[Image(6.jpg, 400)]]
    9494
    9595 5. Wait while the installation of Python, etc occurs. There will typically be a long delay while nothing happens followed by a series of messages as packages are installed.
    9696
    97  [[Image(7.jpg, 60%)]]
     97 [[Image(7.jpg, 400)]]
     98
     99
     100
     101
     102
     103
     104
     105
     106
     107
     108
     109
     110
     111
     112
     113
     114
     115
     116
     117
     118
     119
     120
     121
     122
     123
     124
     125
     126
     127
     128
     129
     130
     131
     132
     133
     134
     135
     136
     137
     138
     139
     140
     141
     142
     143
     144
     145
     146
     147
     148
    98149
    99150
     
    124175=== Step 4:===
    125176
    126 After Python and packages are installed, the ```GSASII/bootstrap.py``` file (also called ```bin/gsas2-install.py```) is invoked to install the GSAS-II files.
    127 
    128 
    129 
    130 If your site requires
    131 
    132  [[Image(8.jpg, 60%)]]
    133  [[Image(9.jpg, 60%)]]
    134  [[Image(10.jpg, 60%)]]
    135  [[Image(11.jpg, 60%)]]
    136  [[Image(12.jpg, 60%)]]
    137  [[Image(13.jpg, 60%)]]
    138  [[Image(14.jpg, 60%)]]
    139 
    140 
    141 
     177After Python and packages are installed, the ```GSASII/bootstrap.py``` file (also called ```bin/gsas2-install.py```) is invoked to install the GSAS-II files using program svn (subversion) from the APS server ```https://subversion.xray.aps.anl.gov/pyGSAS```
     178
     179
     180
     181This script requests the name of a proxy server. Most people will use the default and press return. However, some sites block web traffic unless it is passed through a particular computer. If needed, enter that computer name or IP address here (e.g. proxyout.lanl.gov). You will be requested to also supply a port number, which defaults to 8080.
     182
     183Note that the location of the Python image is shown here (```/Users/toby/g2conda/bin/python```) this is worth noting in case you have installation problems and need to rerun the bootstrap.py script (see below).
     184
     185 [[Image(8.jpg, 400)]]
     186
     187
     188
     189
     190
     191
     192
     193
     194
     195
     196
     197
     198
     199
     200
     201
     202Once the svn command is executed a large number of files are downloaded ending with display of the current GSAS-II version number.
     203
     204 [[Image(9.jpg, 400)]]
     205
     206There will be a brief delay while
     207
     208 [[Image(10.jpg, 400)]]
     209 [[Image(11.jpg, 400)]]
     210 [[Image(12.jpg, 400)]]
     211 [[Image(13.jpg, 400)]]
     212 [[Image(14.jpg, 400)]]
     213
     214
     215