Changes between Version 19 and Version 20 of MacSingleStepInstallerFigs

Timestamp:

Jan 19, 2020 3:43:40 PM (3 years ago)

Author:

toby

Comment:

--

MacSingleStepInstallerFigs

@@ -39 +39 @@
 
 
- 2. Press space several times to page through the copyright notice
+ 2. Press space several times to page through the copyright notice. For convenience the full text [#AnacondaLicense from this screen] and the [#G2license GSAS-II license] are shown below. 
 
  [[Image(4.jpg, 400)]]
@@ -265 +265 @@
 
 
-If there computer does not have an internet connection, this error is expected and can be ignored. If the computer is later connected to the internet, you are recommended to use the 
+If the computer does not have an internet connection, this error is expected and can be ignored. If the computer is later connected to the internet, you are recommended to use the !Help/Update command to obtain the latest version of GSAS-II and continue updating periodically. 
+
+If the computer does have a working internet connection, it is likely that the update failed due to your network requiring an internet proxy (discussed in the next section). 
+
+Note the message for recreating the error:
+{{{
+/<your location>/bin/python /<your location>/GSASII/bootstrap.py --noinstall
+}}}
+
+If GSAS-II is installed, but the installation process is unable to update, create an app, etc., it may be worthwhile to run this command again by copying the information from your error message into a Terminal.app window (the flag such as --noinstall may be omitted.) This will provide better warning and error messages than above. 
 
 [=#BrowserDownload]
 = Installing with a web proxy or to a system without the internet =
 
+If the above "curl" command in step 1 fails, but you are able to download the same file in a web browser, your network is most likely set up so that internet traffic is routed through a proxy computer. If you have a proxy, you will need to know either the name or IP address of the proxy computer and you will need to know the IP port (usually 80 but sometimes something else, such as 8080 or 8000.) Finding a network administrator who knows what your site is doing can be tough but may be needed to get updating to work. The web site http:/www.whatismyproxy.com/ may help.
+
+The easiest way to setup a proxy is to download the installation file with a browser and start it, as described in steps A1 and A2 below, then continue with step 2, above. After completing this installation process, then start GSAS-II and from inside GSAS-II use the File/"Edit Proxy" menu command to enter the proxy information; check if the values work using the Help/"Check for Updates" menu command to update to the latest version. 
+
+
 === Step A1: ===
 
@@ -290 +304 @@
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+[=#Logfiles]
+== Debugging ==
+Two files are created as the GSAS-II installation is done. 
+* File {{{/tmp/bootstrap1.log}}} contains the output when creating the app and making other installation steps.  
+* File {{{/tmp/bootstrap2.log}}} contains the output when performing an update.
+
+If installation fails and you want to get help, please include these files in your e-mail. Note they will deleted during your next reboot. 
+
+
+= Licenses =
+
+[=#AnacondaLicense '''GSAS-II Information & Anaconda license:''']
+
+{{{
+====================================================
+This is a single-download installer for GSAS-II. It includes other
+software such as subversion (svn, used to update GSAS-II), a Python 
+interpreter and a number of Python packages required by GSAS-II. The
+file you are running will install GSAS-II, Python, etc. and will then
+run the bootstrap.py script to create shortcuts and will use svn to
+update to the latest version of GSAS-II, if an internet connection is
+available. Note that the bootstrap.py script can be rerun manually to
+obtain updates.
+
+*** Note that while this installer can be rerun to install the software
+in a new location, once these files are installed, they should not be
+moved. ***
+
+If you use GSAS-II in your research, please show your support by citing:
+B.H. Toby & R.B. Von Dreele, J. Appl. Cryst. 46, 544-549 (2013)  
+(also see Help/About)
+
+See the GSAS-II source code for license information. Material
+below is relevant to the Anaconda Python distribution, which is
+freely provided by Continuum Analytics, Inc. 
+
+====================================================
+ Copyright (c) 2016, Continuum Analytics, Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of Continuum Analytics, Inc. nor the
+      names of its contributors may be used to endorse or promote products
+      derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL CONTINUUM ANALYTICS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+THE POSSIBILITY OF SUCH DAMAGE.
+}}}
+
+[=#G2license '''GSAS-II License:''']
+
+{{{
+           General Structure Analysis System - II (GSAS-II)
+                         OPEN SOURCE LICENSE
+
+Copyright 2010, UChicago Argonne, LLC, Operator of Argonne National Laboratory 
+All rights reserved.
+
+GSAS-II may be used by anyone on a royalty-free basis. Use and
+redistribution, with or without modification, are permitted provided
+that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+* Software changes, modifications, or derivative works should be noted
+  with comments and the author and organization's name.
+* Distribution of changed, modified or derivative works based on
+  GSAS-II grants the GSAS-II copyright holder unrestricted permission
+  to include any, or all, new and changed code in future GSAS-II
+  releases.
+* Redistributions that include binary forms must include all relevant
+  source code and reproduce the above copyright notice, this list of
+  conditions and the following disclaimers in the documentation and/or
+  other materials provided with the distribution.
+* Neither the names of UChicago Argonne, LLC or the Department of
+  Energy nor the names of its contributors may be used to endorse or
+  promote products derived from this software without specific prior
+  written permission.
+* The software and the end-user documentation included with the
+  redistribution, if any, must include the following acknowledgment:
+  "This product includes software produced by UChicago Argonne, LLC
+  under Contract No. DE-AC02-06CH11357 with the Department of Energy."
+
+*****************************************************************************
+WARRANTY DISCLAIMER: THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
+UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
+EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME
+ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
+OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
+SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE
+OR THAT ANY ERRORS WILL BE CORRECTED.
+
+LIMITATION OF LIABILITY: IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
+OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
+CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
+INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY
+REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF
+CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR
+OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE
+POSSIBILITY OF SUCH LOSS OR DAMAGES.
+******************************************************************************
+}}}
+
+
+
+
 == Older installers ==
 
-These links offer an older distributions that have worked for many people, if you have trouble with the previous (but please do report problems). Note that these installers require an internet connection to complete the installation: 
+These links offer an older distributions that have worked for many people, if you have trouble with the previous (but please do report problems). They may be needed for systems with older versions of OS X. Note that these installers do require an internet connection to complete the installation: 
 
 * https://subversion.xray.aps.anl.gov/admin_pyGSAS/downloads/g2conda-1.0.1-MacOSX-x86_64.sh (Python 3.7, wxPython 4.0.3, !NumPy 1.51.1, !SciPy 1.1.0, matplotlib 2.2.3,...)
 * https://subversion.xray.aps.anl.gov/admin_pyGSAS/downloads/g2conda-py27-1.0.2-MacOSX-x86_64.sh (Python 2.7.x, wxPython 3.0.0...) 
-* ```g2conda-0.1.2-MacOSX-x86_64.sh``` from this URL https://anl.box.com/v/GSASII4mac12 (quite old, not recommended)
-
-
-
+
+