Changes between Version 3 and Version 4 of DemoIntegrateTilted


Ignore:
Timestamp:
Jul 27, 2011 11:59:57 PM (10 years ago)
Author:
toby
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • DemoIntegrateTilted

    v3 v4  
    4343Step 5: Calibrate
    4444
    45   First: set the material used as a sample in the box labeled Calibrant
     45 First:
     46   Set the material used as a sample in the box labeled Calibrant
    4647
    47   Second: Use the Image Operations/Calibrate menu item (note this menu is on the Image Controls window or for the Mac, the Image Controls window must be active to place this into the system menu bar).
     48 Second:
     49   Use the Image Operations/Calibrate menu item (note this menu is on the Image Controls window or for the Mac, the Image
     50   Controls window must be active to place this into the system menu bar). At this point the status line on the bottom of the
     51   Image Controls window changes with a prompt to select points for calibration.
     52   ([https://subversion.xor.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d1w4.png view]).
     53
     54 Use the left mouse button to click on at least four locations on the innermost ring. When done, press the right mouse button well away from the ring [on the Mac, if you have a single-button mouse, hold the Command (⌘) key down and click].
     55
     56 To remove a point added in error click on that point with the right mouse button [on the Mac, if you have a single-button mouse, hold the Command (⌘) key down and click].