Changes between Version 16 and Version 17 of DemoIntegrateTilted

Timestamp:

Sep 6, 2012 4:11:19 PM (11 years ago)

Author:

toby

Comment:

--

DemoIntegrateTilted

@@ -15 +15 @@
 In the simplest case, all that is needed is to click on the "Do full integration?" checkbox and adjust the inner and outer 2-theta values with the two "Inner/Outer 2-theta" controls. For the {{{La_hex_+45deg-00015.tif}}} image loaded before, good values are 0.5 and 7 degrees.
 
-It is helpful to see the two-theta limits on the plot visually, while adjusting the two-theta range. This is done by clicking on the "Show integration limits?" checkbox. Note that inner limit is shown as a green ellipse and the outer is shown as a red ellipse ([https://subversion.xor.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w1.jpg view]). These limits may also be dragged to the desired values; a small popup window shows the value.
+It is helpful to see the two-theta limits on the plot visually, while adjusting the two-theta range. This is done by clicking on the "Show integration limits?" checkbox. Note that inner limit is shown as a green ellipse and the outer is shown as a red ellipse ([https://subversion.xray.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w1.jpg view]). These limits may also be dragged to the desired values; a small popup window shows the value.
 Note that changes are displayed only after pressing return, when numbers are placed in the boxes. 
 
@@ -32 +32 @@
 
  At this point the data tree window will have a new entries as each azimuthal "slice" added to the data tree 
- ([https://subversion.xor.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w2.jpg view]). Also,
+ ([https://subversion.xray.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w2.jpg view]). Also,
  two plots are added to the plot window: One (with tab 2D Integration) shows the diffraction intensity as a function of
  both 2-theta and (when there is more than one azimuthal integration region) azimuthal angle
- ([https://subversion.xor.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w3.png view]); The other shows a
+ ([https://subversion.xray.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w3.png view]); The other shows a
  conventional 1-D powder pattern(s) for each "slice"
- ([https://subversion.xor.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w4.png view]). 
+ ([https://subversion.xray.aps.anl.gov/trac/pyGSAS/attachment/wiki/DemoIntegrateTilted/d2w4.png view]).