Changeset 2973

Timestamp:

Aug 8, 2017 4:07:35 PM (6 years ago)

Author:

vondreele

Message:

update to 2 frame

Location:

Tutorials/2DIntegration

Files:

• Integration of area detector data in GSAS.htm (modified) (16 diffs)
• Integration of area detector data in GSAS_files/filelist.xml (modified) (1 diff)
• Integration of area detector data in GSAS_files/image001.png (deleted)
• Integration of area detector data in GSAS_files/image003.png (deleted)
• Integration of area detector data in GSAS_files/image005.png (modified) (previous)
• Integration of area detector data in GSAS_files/image006.png (modified) (previous)
• Integration of area detector data in GSAS_files/image007.png (modified) (previous)

Tutorials/2DIntegration/Integration of area detector data in GSAS.htm

@@ -24 +24 @@
  <o:DocumentProperties>
   <o:Author>Von Dreele</o:Author>
-  <o:LastAuthor>Von Dreele</o:LastAuthor>
-  <o:Revision>15</o:Revision>
-  <o:TotalTime>156</o:TotalTime>
+  <o:LastAuthor>vondreele</o:LastAuthor>
+  <o:Revision>16</o:Revision>
+  <o:TotalTime>163</o:TotalTime>
   <o:Created>2012-05-04T20:46:00Z</o:Created>
-  <o:LastSaved>2015-03-17T21:14:00Z</o:LastSaved>
-  <o:Pages>1</o:Pages>
-  <o:Words>856</o:Words>
-  <o:Characters>4883</o:Characters>
+  <o:LastSaved>2017-08-08T21:04:00Z</o:LastSaved>
+  <o:Pages>6</o:Pages>
+  <o:Words>885</o:Words>
+  <o:Characters>5051</o:Characters>
   <o:Company>Argonne National Laboratory</o:Company>
-  <o:Lines>40</o:Lines>
+  <o:Lines>42</o:Lines>
   <o:Paragraphs>11</o:Paragraphs>
-  <o:CharactersWithSpaces>5728</o:CharactersWithSpaces>
-  <o:Version>15.00</o:Version>
+  <o:CharactersWithSpaces>5925</o:CharactersWithSpaces>
+  <o:Version>16.00</o:Version>
  </o:DocumentProperties>
  <o:OfficeDocumentSettings>
@@ -48 +48 @@
 <!--[if gte mso 9]><xml>
  <w:WordDocument>
+  <w:View>Print</w:View>
+  <w:Zoom>156</w:Zoom>
   <w:SpellingState>Clean</w:SpellingState>
   <w:GrammarState>Clean</w:GrammarState>
@@ -677 +679 @@
         mso-generic-font-family:swiss;
         mso-font-pitch:variable;
-        mso-font-signature:-536870145 1073786111 1 0 415 0;}
+        mso-font-signature:-536859905 -1073732485 9 0 511 0;}
 @font-face
         {font-family:Tahoma;
@@ -1173 +1175 @@
         mso-hansi-font-family:"Courier New";
         mso-bidi-font-family:"Courier New";}
+p.msonormal0, li.msonormal0, div.msonormal0
+        {mso-style-name:msonormal;
+        mso-style-noshow:yes;
+        mso-style-priority:99;
+        mso-style-unhide:no;
+        mso-margin-top-alt:auto;
+        margin-right:0in;
+        mso-margin-bottom-alt:auto;
+        margin-left:0in;
+        mso-pagination:widow-orphan;
+        font-size:12.0pt;
+        font-family:"Times New Roman",serif;
+        mso-fareast-font-family:"Times New Roman";
+        mso-fareast-theme-font:minor-fareast;}
 span.TitleChar
         {mso-style-name:"Title Char";
@@ -1225 +1241 @@
         mso-hansi-font-family:Tahoma;
         mso-bidi-font-family:Tahoma;}
+span.SpellE
+        {mso-style-name:"";
+        mso-spl-e:yes;}
 span.GramE
         {mso-style-name:"";
@@ -1272 +1291 @@
         mso-ascii-theme-font:minor-latin;
         mso-hansi-font-family:Calibri;
-        mso-hansi-theme-font:minor-latin;}
+        mso-hansi-theme-font:minor-latin;
+        mso-bidi-font-family:"Times New Roman";
+        mso-bidi-theme-font:minor-bidi;}
 </style>
 <![endif]--><!--[if gte mso 9]><xml>
@@ -1292 +1313 @@
 intentionally tilted at 45 degrees, are used. Note that menu entries are listed
 in <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>bold face</span></b> below as <b
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>bold face</span></b> below as <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Help/About
+GSAS-II</span></b>, which lists first the name of the menu (here <b
 style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Help/About GSAS-II</span></b>, which
-lists first the name of the menu (here <b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
 minor-latin'>Help</span></b>) and second the name of the entry in the menu
 (here <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>About GSAS-II</span></b>).</p>
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>About GSAS-II</span></b>).</p>
 
 <h2>Prerequisite:<span style='mso-spacerun:yes'>  </span>Calibration Demo</h2>
@@ -1318 +1338 @@
 longer needed. The <b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Image Controls/Clear Calibration</span></b> menu entry removes
-these from the plot, but<u> does not clear the calibration results</u>. Use of
-this menu item is not required, but does speed future display of results. </p>
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Calibration/Clear
+Calibration</span></b> menu entry removes these from the plot, but<u> does not
+clear the calibration results</u>. Use of this menu item is not required, but
+does speed future display of results. </p>
 
 <h2>Step 2: Integration Settings</h2>
@@ -1327 +1347 @@
 <p class=MsoNormal>In the simplest case, all that is needed is to click on the <b
 style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Do full integration?</span></b> <span
-class=GramE>check</span> box and adjust the inner and outer 2-theta values with
-the <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Inner 2-theta</span></b> and<b
-style='mso-bidi-font-weight:normal'> </b><b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>Do full integration?</span></b> <span class=GramE>check</span> box
+and adjust the inner and outer 2-theta values with the <b style='mso-bidi-font-weight:
+normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
+minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Inner
+2-theta</span></b> and<b style='mso-bidi-font-weight:normal'> </b><b
+style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
 minor-latin'>Outer 2-theta</span></b> controls. It is helpful to see the
 two-theta limits on the plot visually, while adjusting the two-theta range.
 This is done by clicking on the <b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Show integration limits?</span></b> <span class=GramE>check</span>
-box. Note that inner limit is shown as a green ellipse at 2deg and the outer is
-shown as a red ellipse at 5deg by default. These limits may also be dragged to
-the desired values; a small popup window shows the value. </p>
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Show
+integration limits?</span></b> <span class=GramE>check</span> box. Note that
+inner limit is shown as a green ellipse at 2deg and the outer is shown as a red
+ellipse at 5deg by default. These limits may also be dragged to the desired
+values; a small popup window shows the value. </p>
 
 <p class=MsoNormal>Change the limits to <b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>1</span></b> and <b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>1</span></b>
+and <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
 minor-latin'>7</span></b> for this data. Note that changes are displayed when
 numbers are placed in the boxes only after pressing return or tab key or by
@@ -1376 +1394 @@
  <v:path o:extrusionok="f" gradientshapeok="t" o:connecttype="rect"/>
  <o:lock v:ext="edit" aspectratio="t"/>
-</v:shapetype><v:shape id="Picture_x0020_6" o:spid="_x0000_i1028" type="#_x0000_t75"
- style='width:472.5pt;height:388.5pt;visibility:visible;mso-wrap-style:square'>
- <v:imagedata src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image001.png"
+</v:shapetype><v:shape id="Picture_x0020_5" o:spid="_x0000_i1028" type="#_x0000_t75"
+ style='width:468pt;height:306pt;visibility:visible;mso-wrap-style:square'>
+ <v:imagedata src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image005.png"
   o:title=""/>
-</v:shape><![endif]--><![if !vml]><img width=630 height=518
-src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image001.png"
-v:shapes="Picture_x0020_6"><![endif]></span></p>
+</v:shape><![endif]--><![if !vml]><img width=624 height=408
+src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image006.png"
+v:shapes="Picture_x0020_5"><![endif]></span></p>
 
 <h3>Other useful controls:</h3>
@@ -1388 +1406 @@
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Azimuth offset</span></b>: The image horizontal axis (from the beam
-center, going right) is labeled with the azimuth value placed in the <b
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Azimuth
+offset</span></b>: The image horizontal axis (from the beam center, going
+right) is labeled with the azimuth value placed in the <b style='mso-bidi-font-weight:
+normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
+minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Azimuth
+offset</span></b> box. This is usually zero unless the image plate has been
+rotated about its normal axis.</p>
+
+<p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Start/End
+azimuth</span></b>: The integration is started at the Start azimuth angle in
+the left box, and when the <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Do full
+integration?</span></b> <span class=GramE>check</span> box is not checked, the
+integration will be run only to the maximum value specified. When the range is
+less than 360 degrees, the integration range will be shown (if selected) with
+the high and low limits plotted and only segments of the max and min ellipses
+drawn. These limits may also be dragged on the plot to desired locations. In
+this case <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin'>45</span></b>
+is a better choice than the default.</p>
+
+<p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Number of
+2-theta bins</span></b>: The resulting 1-D powder pattern after integration
+will consist of this many points. This number should be on the order of the
+number of pixels in one direction (since resolution cannot be much better than
+this) or less, if instrumental resolution and sample broadening does not
+require that many points. Some trial and error may be needed, but there should
+more than 6 points across each peak full-width-at-half-maximum (FWHM) in the
+final pattern to be useful for further analysis. For this reason <b
 style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Azimuth offset</span></b> box. This is
-usually zero unless the image plate has been rotated about its normal axis.</p>
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin'>5000</span></b>
+is a better choice than the default.</p>
 
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Start/End azimuth</span></b>: The integration is started at the
-Start azimuth angle in the left box, and when the <b style='mso-bidi-font-weight:
-normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
-minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;
-mso-bidi-theme-font:minor-latin'>Do full integration?</span></b> <span
-class=GramE>check</span> box is not checked, the integration will be run only
-to the maximum value specified. When the range is less than 360 degrees, the
-integration range will be shown (if selected) with the high and low limits plotted
-and only segments of the max and min ellipses drawn. These limits may also be
-dragged on the plot to desired locations. In this case <b style='mso-bidi-font-weight:
-normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
-minor-latin;mso-hansi-theme-font:minor-latin'>45</span></b> is a better choice
-than the default.</p>
-
-<p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Number of 2-theta bins</span></b>: The resulting 1-D powder
-pattern after integration will consist of this many points. This number should
-be on the order of the number of pixels in one direction (since resolution
-cannot be much better than this) or less, if instrumental resolution and sample
-broadening does not require that many points. Some trial and error may be
-needed, but there should more than 6 points across each peak
-full-width-at-half-maximum (FWHM) in the final pattern to be useful for further
-analysis. For this reason <b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin'>5000</span></b> is a better choice than the
-default.</p>
-
-<p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Number of azimuth bins</span></b>: In cases where the diffraction
-experiment shows changes as a function of azimuthal angle, the integration can
-be performed as a function of angle. This number specifies the number of bins
-to use by azimuthal angle. The process of breaking up the integration in this
-way is sometimes called &quot;caking&quot; since the integration region grows
-with distance from the beam-center, with a shape like a slice of cake or pie.
-When more than one azimuthal bin is used, the regions are shown in the plot
-with dashed lines, when the <b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin'>Show integration limits?</span></b> <span
-class=GramE>check</span> box is checked. </p>
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Number of
+azimuth bins</span></b>: In cases where the diffraction experiment shows
+changes as a function of azimuthal angle, the integration can be performed as a
+function of angle. This number specifies the number of bins to use by azimuthal
+angle. The process of breaking up the integration in this way is sometimes
+called &quot;caking&quot; since the integration region grows with distance from
+the beam-center, with a shape like a slice of cake or pie. When more than one
+azimuthal bin is used, the regions are shown in the plot with dashed lines,
+when the <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin'>Show
+integration limits?</span></b> <span class=GramE>check</span> box is checked. </p>
 
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
@@ -1455 +1470 @@
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Appl. det. absorption</span></b> and <b style='mso-bidi-font-weight:
-normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
-minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;
-mso-bidi-theme-font:minor-latin'>value</span></b>: The scattered ray beams are
-partially absorbed by the detector depending on the scattering angle. This
-reduces the intensity of higher angle data more than low angle data. The value
-is dependent on the wavelength and the materials used for the front surface of
-the detector, so some experimentation with a standard is needed to establish an
-appropriate value.</p>
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Appl. det.
+absorption</span></b> and <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>value</span></b>:
+The scattered ray beams are partially absorbed by the detector depending on the
+scattering angle. This reduces the intensity of higher angle data more than low
+angle data. The value is dependent on the wavelength and the materials used for
+the front surface of the detector, so some experimentation with a standard is
+needed to establish an appropriate value.</p>
 
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
@@ -1475 +1489 @@
 visible image so you will see the result of the removal of the dark image. Note
 that the <b style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Multiplier</span></b> must be negative
-for it to be subtracted. Note that all images used in this way must be exactly
-the same format (number of pixels &amp; pixel size).</p>
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>Multiplier</span></b> must be negative for it to be subtracted.
+Note that all images used in this way must be exactly the same format (number
+of pixels &amp; pixel size).</p>
 
 <p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
 style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Background image</span> </b>and<b style='mso-bidi-font-weight:
-normal'> </b><b style='mso-bidi-font-weight:normal'><span style='font-family:
-"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:
-minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:minor-latin'>Multiplier</span></b>:
-You can designate a previously read in image as background which will then be
-used to modify each data image as they are integrated. Note that the <b
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Background
+image</span> </b>and<b style='mso-bidi-font-weight:normal'> </b><b
 style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Multiplier</span></b> must be negative
-for it to be subtracted. Note that all images used in this way must be exactly
-the same format (number of pixels &amp; pixel size).</p>
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>Multiplier</span></b>: You can designate a previously read in
+image as background which will then be used to modify each data image as they
+are integrated. Note that the <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Multiplier</span></b>
+must be negative for it to be subtracted. Note that all images used in this way
+must be exactly the same format (number of pixels &amp; pixel size).</p>
+
+<p class=MsoNormal><b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Flat <span
+class=SpellE>Bkg</span></span></b>: Instead of subtracting a background image
+(you might not have one!), you can subtract a constant. Use the cursor to find
+a reasonable value to enter here; it is immediately applied to the image.</p>
 
 <p class=MsoNormal><span style='mso-no-proof:yes'><!--[if gte vml 1]><v:shape
@@ -1508 +1528 @@
 <p class=MsoNormal><span style='mso-spacerun:yes'> </span>Use the <b
 style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>Image Operations/Integrate</span></b>
-image data menu item to start the integration. This will take at least a few
-seconds. If multiple images have been read in, the <b style='mso-bidi-font-weight:
+mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
+minor-latin'>Integration/Integrate</span></b> image data menu item to start the
+integration. This will take at least a few seconds. If multiple images have
+been read in, the <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Integrate All</span></b>
+menu item can be used. This is most useful when the <b style='mso-bidi-font-weight:
 normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
-minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;
-mso-bidi-theme-font:minor-latin'>Integrate All</span></b> menu item can be
-used. This is most useful when the <b style='mso-bidi-font-weight:normal'><span
-style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
-mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;mso-bidi-theme-font:
-minor-latin'>Use as Default</span></b> option is in use for one image.</p>
+minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>Use
+as Default</span></b> option is in use for one image.</p>
 
 <p class=MsoNormal><span style='mso-spacerun:yes'> </span>At this point the
@@ -1525 +1544 @@
 
 <p class=MsoNormal><span style='mso-no-proof:yes'><!--[if gte vml 1]><v:shape
- id="Picture_x0020_8" o:spid="_x0000_i1026" type="#_x0000_t75" style='width:300pt;
- height:187.5pt;visibility:visible;mso-wrap-style:square'>
- <v:imagedata src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image003.png"
+ id="Picture_x0020_6" o:spid="_x0000_i1026" type="#_x0000_t75" style='width:330pt;
+ height:282pt;visibility:visible;mso-wrap-style:square'>
+ <v:imagedata src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image007.png"
   o:title=""/>
-</v:shape><![endif]--><![if !vml]><img width=400 height=250
-src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image003.png"
-v:shapes="Picture_x0020_8"><![endif]></span><span
+</v:shape><![endif]--><![if !vml]><img width=440 height=376
+src="Integration%20of%20area%20detector%20data%20in%20GSAS_files/image007.png"
+v:shapes="Picture_x0020_6"><![endif]></span><span
 style='mso-spacerun:yes'> </span></p>
 
@@ -1548 +1567 @@
 <p class=MsoNormal>Again you could save the project with <b style='mso-bidi-font-weight:
 normal'><span style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:
-minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:Calibri;
-mso-bidi-theme-font:minor-latin'>File/Save project</span></b> on the main <b
-style='mso-bidi-font-weight:normal'><span style='font-family:"Calibri",sans-serif;
-mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:
-Calibri;mso-bidi-theme-font:minor-latin'>GSAS-II data tree</span></b> menu
-although it is not needed for any further tutorials.</p>
+minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>File/Save
+project</span></b> on the main <b style='mso-bidi-font-weight:normal'><span
+style='font-family:"Calibri",sans-serif;mso-ascii-theme-font:minor-latin;
+mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:minor-latin'>GSAS-II data
+tree</span></b> menu although it is not needed for any further tutorials.</p>
 
 </div>

Tutorials/2DIntegration/Integration of area detector data in GSAS_files/filelist.xml

@@ -3 +3 @@
  <o:File HRef="themedata.thmx"/>
  <o:File HRef="colorschememapping.xml"/>
- <o:File HRef="image001.png"/>
+ <o:File HRef="image005.png"/>
+ <o:File HRef="image006.png"/>
  <o:File HRef="image002.png"/>
- <o:File HRef="image003.png"/>
+ <o:File HRef="image007.png"/>
  <o:File HRef="image004.png"/>
  <o:File HRef="filelist.xml"/>