EXPGUI top Previous page

Greater Seattle Aquarium Society Logo (www.gsas.org). Used with permission

Using the GSAS2CIF program
to export GSAS results

The crystallographic information file, (CIF) was developed by the IUCr in the early 1990's as a standardized format to document single-crystal structure determinations and to exchange the results between laboratories. In the late 1990's, the pdCIF dictionary was developed to allow CIF to document powder diffraction measurements, as well as Rietveld results. A very short introduction to CIF is included at the end of this document.

The GSAS2CIF program is used to create CIFs from GSAS results. This web page documents concepts within the program as well as how the program is used.

Overview of the steps to create a CIF in GSAS

  1. Complete (ha!) your refinement, being sure to run GENLES after making any changes to the .EXP file with EXPEDT/EXPGUI.
  2. Run DISAGL to compute interatomic distances and angles.
  3. (Optional) Edit the " publication flags" in the distance and angle listings.
  4. (Optional) Use EXPGUI program FillTemplate to customize copies of CIF template files in the current directory, or manually copy these files to the current directory and use a text editor.
  5. Run GSAS2CIF (this creates experiment-specific copies of the template files).
  6. Edit the template files (for example, using FillTemplate) to include information.
  7. Run GSAS2CIF again, to incorporate the revised versions of the template files into the complete .CIF file.

    ... and if you are like me...

  8. try out a few more ideas in GENLES.
  9. Run DISAGL.
  10. Run GSAS2CIF

    ... repeat steps 8-10 until really finished... (see quote).

Structure of the GSAS2CIF program

The GSAS2CIF program is used to prepare CIF files containing results from GSAS. It should be noted many important types of information that are needed to describe the sample and the measurement are not supplied as input to GSAS. A few examples of information that should likely be included in a CIF, but are not defined within GSAS are: the data measurement temperature, sample preparation conditions, publication information, and so on. If the CIF will be used as supplementary material, to accompany a publication, this sort of documentary information certainly should be supplied, so that the CIF has value for archival and database purposes. If a CIF is being prepared for submission to an Acta Crystallographia journal, the IUCr has template with a recommended list of CIF data items. This template has been utilized for creation of the template files distributed with GSAS/EXPGUI.

Template Files
Since the GSAS2CIF program cannot obtain much of the information needed to create a CIF that documents a structural determination, this information must be supplied by the person running the program in the form of template files. The GSAS2CIF program simply copies this information from template files into the CIF created by GSAS2CIF. Three separate template files are used with GSAS2CIF:
  1. one with publication and other overall information,
  2. one with information about the sample & specimen and
  3. one with information about diffraction instrumentation and data collection parameters.
Note that as distributed, these files do not contain any information, but rather define a set of suggested fields where the user can provide this information. Since much of the information in these fields will be the same for all CIF's prepared by a researcher or using a specific instrument, it will be a good idea to create customized versions of these template files and thus avoid inputing the same information multiple times.

When GSAS2CIF is used to create a CIF file for an experiment named expnam (e.g. from file expnam.EXP), the GSAS2CIF program creates CIF file expnam.cif containing GSAS results. Information from a series of template files is copied directly into the CIF. There will be N+M+1 template files, where N is the number of phases and M is the number of data histograms. The files are named as follows:

  1. expnam_publ.cif for the publication/overall information template file;
  2. expnam_phasen.cif for the N sample/specimen template file(s);
  3. expnam_INSTmm.cif for the the M instrument/data sample/specimen template file(s), where INST is the instrument name (see below).
If these files do not exist, they are created and filled with the contents of master versions of the template files. In the case of the expnam_publ.cif and expnam_phasen.cif files, template files named template_publ.cif and template_phase.cif are read, if present from the same directory where the expnam.EXP file is found, and if not present there, from the GSAS data directory. In the case of the expnam_INSTmm.cif file(s), the program first looks for files named template_INST.cif in the current directory and the GSAS data directory and if that file is not found, file template_instrument.cif is read from the current directory and if not found, the GSAS data directory. This somewhat complex series of template files allows for the creation default template files for commonly-used instruments as well as the potential for reuse of the other template files, by copying these files as needed and also allows the GSAS2CIF program to be reused to update the CIF as needed without loss of input information.

Note, that users should avoid editing the final expnam.cif file, but rather should edit the expnam_*.cif template files and then rerun GSAS2CIF to incorporate the revised template files into a new version of the expnam.cif file. In this way, if GSAS2CIF is rerun at a later time, the crystallographic results in the .CIF are updated and the template information is retained automatically. This editing can be done with any ASCII text editor, but an application has been included within EXPGUI, FillTemplate, for this purpose.

Other Input Files
In addition to the reading the GSAS experiment file (file expnam.EXP), GSAS2CIF also reads the variance-covariance matrix created in GENLES (from file expnam.CMT) and a table of interatomic distances and angles created from program DISAGL (file expnam.DISAGL). If these files cannot be read, GSAS2CIF produces a warning message, since the CIF will be incomplete without this information. Note that the .CMT and .DISAGL are both derived from GENLES output and thus the .EXP file must have been used to run GENLES and then DISAGL just prior to running GSAS2CIF. If you edit the .EXP file or go back to an archived experiment file and do not rerun GENLES and then DISAGL, (expnam.Onn), the most recent expnam.CMT and expnam.DISAGL will be out-of-sync with the .EXP contents. GSAS2CIF will try to spot this and warn you, but some errors may be hard to catch.

Instrument Name

An instrument name is needed for every GSAS histogram. It is best if this name is unique to a specific instrument, so for commercial instruments, it is best if this name contains part of the instrument serial number or the institution name, etc. The instrument name may be defined in the instrument parameter file, by inclusion of a record of type "INS nn INAME Instrument name". If this name is not defined in the original instrument parameter file, when GSAS2CIF is run, it will request an instrument name for each histogram, and this information will be added to the GSAS experiment file. Note that the vertical bar character, (|), should not be used in instrument names.

Publication/Non-Publish Flag for Distances and Angles

The DISAGL program will tabulate all interatomic distances within specified interatomic radii. These radii may be modified using EXPEDT (but not at present EXPGUI). All distances and angles listed by DISAGL in the expnam.LST file will be recorded in a more compact format in file named expnam.DISAGL. All these distances and angles will then be included in the CIF file when GSAS2CIF is run.

Note that when an IUCr journal publication is prepared from a CIF, these distances and angles are abstracted directly into the publication tables from the CIF, provided that a special CIF flag for each distance/angle (_geom_bond_publ_flag and _geom_angle_publ_flag) indicates that these values should be published. The character in the first column of the expnam.DISAGL indicates the value for this flag, when the distances/angles are tabulated in the CIF. If this character is anything other than "Y" or "y", the distance/angle is flagged as "do not publish". A value of "Y" or "y" indicates this flag should be set to "publish." At present, the only way to change this flag is manually, with a text editing program, such as wordpad or emacs. An EXPGUI program, CIFSelect, is available for this chore.

When DISAGL is first run, this flag character is set to N (do not publish) for all distances and angles. However, if any of these flags are changed in the .DISAGL file, these flag settings will be retained if DISAGL is rerun.

The FillTemplate program

The EXPGUI FillTemplate program is used to edit the CIF template files used within GSAS2CIF. The expnam_*.cif files are edited by this program, if they exists. If these files are not found (because GSAS2CIF has not been run), the template_*.cif in the current directory are edited. If there these files are not found as well, the template_*.cif in the GSAS data directory are copied to the current directory and are then made available for editing.

The FillTemplate program is accessed in EXPGUI from the "CIF Export" submenu of the "Import/Export" menu. The FillTemplate program opens a window, as is shown below:

View of FillTemplate window
The box on the left side of the window displays the datanames in the CIF as a hierarchical tree. Note that subentries can be displayed or hidden by clicking on the +/- sign to the right of a group. For example, by default the datanames contained in each loop are not shown, but clicking on the + sign to the right of the "loop_0" listing (shown below), allows the three data items included in this loop to be displayed.

Clicking on an individual dataname causes the associated value to be displayed on the right. This value can be edited by clicking on the entry box. Note these edits are not performed until the "Save Changes" button is pressed, unless the "Auto-Accept" is turned on.

In the case above, the dataname _pd_prep_temperature is defined in the CIF dictionary as a number between 0 and infinity and the units are defined as Kelvins, so the input will be validated to ensure that only numbers in the allowed range are input and the units are displayed. If the CIF dictionary defines a enumerated list of values for a dataname, these are the only valid choices, so a menu button offers a list of these options, in place of a box where text can be typed.

CIF loops allow multiple values to be associated with one or more data items, in effect defining a table of data. Clicking on a loop, causes all the datanames in the loop to be displayed, as is shown below.

View of FillTemplate window
When a loop is displayed, extra controls appear. The "spinbox" to the right of the "Loop element #" label is used to select which "row" from the loop is displayed. A new row can be added to the end of a loop using the "Add to loop" button and the displayed row can be deleted from a loop using the "Delete loop entry" button. It is also possible to click on the dataname for a item inside a loop, in this case, all entries for that data item in the loop are displayed (a column).

The controls on the bottom of the window have the following effects:

Save Changes

Template file
The menu button labeled "Template file" offers a list of template files. This button can be used to select a file to be edited. If changes have been made to the current CIF, that have not been saved to disk, the user is offered a chance to save or discard these changes.

Next ? in template
If the button labeled "Next ? in template" is pressed, the program scans forward in the current file, and if needed through subsequent files, for a data item where the value is a single question mark (?), since this value indicates a item where a value has not been specified. Note that the _journal_ data items, which are intended to be used by Acta Crystallographia editors, are ignored by this button.

The "Exit" button causes the program to exit. If any changes have been made to a data item or the CIF has been changed, but have not been saved, a chance is offered to save these items.

Show/Hide CIF contents
The "Show CIF contents" button causes a window to be displayed that shows the text of the CIF, as shown below. As CIF data items are selected by clicking on data names or through use of the other buttons, the window is scrolled forward or backward to show the appropriate section. Note that it is possible to make editing changes directly to the CIF using this window, but the program cannot verify that these edits have the correct syntax. Further, the program will not note that changes have been made to the CIF so another section of the file must be changed, before the edits can be saved to disk (see the Save Edits button).

After the "Show CIF contents" button is pressed, the label changes to "Hide CIF contents"; pressing the button again causes the window to be hidden.
View of CIF text window

Show/Hide CIF definitions
As CIF datanames are selected, their definitions are shown in the CIF Definitions window, as shown below. After the "Show CIF definitions" button is pressed, the label changes to "Hide CIF definitions"; pressing the button again causes the window to be hidden.
View of CIF definitions window

Save Edits
Changes made to the CIF are not saved to the disk file automatically, unless the Auto-Save checkbutton is set. When changes have been made, but not saved to disk, this button is made active.

When the Auto-Accept mode is not selected, as information is added to the edit boxes for CIF items, these changes are not made to the in-memory copy of the CIF that is displayed in the CIF Contents window. The "Save Changes" button causes these changes to be applied. If the Auto-Accept mode is selected, these changes are made automatically.

When the Auto-Save mode is not selected, changes made to the in-memory copy of the CIF that is displayed in the CIF Contents window are not written to the disk file until the "Save Changes" button is pressed. If the Auto-Save mode is selected, these changes are saved to disk automatically.

The CIFSelect utility

The CIFselect utility is available within EXPGUI to view interatomic distances and angles generated by DISAGL and to set the CIF publication flags for these values. CIFselect is accessed in EXPGUI from the "CIF Export" submenu of the "Import/Export" menu. CIFselect opens two windows, one for controlling the program and one to display the distances.

View of CIFselect window The control window is shown to the right. The buttons on this window are described below.

Select Phase
This provides a list of phases.

Select Atom
This provides a list of atoms for the current phase.

Response to Mouse Click
When the mouse is clicked on a distance or angle (see below), the publication flag for the may be changed. The effect is dictated by the mode selected here. In "Toggle" mode the publication flag is set to the opposite of the previous value. In "Set" mode, the publication flag will be set to "Y" (publish), regardless of the previous state of the flag. In "Clear" mode, the publication flag will be set to "N" (do not publish), regardless of the previous state of the flag.

Distance selection: select matching angles?
When this option is set to Yes, the publication flag will be set to "Yes" for all angles where both the publication flags for the distances are also set to "Yes". This is illustrated in the window shown below. Note that the distance AL3-O6_a is set to be not published. The five angles that involve atom O6_a were automatically set to be not published. If this option is set to Yes, turning on the publication flag for distance AL3-O6_a would cause the publication flag to be set on as well. If this option is set to "No", angle flags must be changed individually.

This button causes the current flag settings to be saved in the expnam.DISAGL file.

Export Tables
This button creates a file with all bond distances and angles for the current phase, formatted in the arrangement used in the window below. Each entry is separated by a comma, suitable for reading into spreadsheet programs.

This button causes CIFselect to exit. If there are unsaved changes to publication flags, you will be given an opportunity to save or discard these changes.

The distance and angle display window is shown below. The items that are selected for publication are highlighted in yellow.
View of CIFselect window


The GSAS2CIF program was written by Brian H. Toby, Robert B. Von Dreele and Allen C. Larson. The distance/angle display format for CIFselect was suggested by Lachlan Cranswick, based on SHELX.

Richard L. Harlow first got me interested in the problem of a universal file format for powder diffraction data, leading eventually to my involvement with CIF and then this programming effort. For all this, I may someday forgive him.

"A Rietveld refinement is never perfected, merely abandoned." Peter Stephens

Appendix: A quick & incomplete introduction to CIF

A CIF file consists of logical groups of information that are called data blocks, since each block is initiated by a label of form data_label. In the simple case, where a single crystallographic model is determined from a single diffraction dataset (histogram), the CIF can be a single block. In the case where either multiple datasets (histograms) or where multiple phases are used in the refinement, a CIF will require several data blocks to describe the data and results.

CIF consists of a series of tags, called data names, and values associated with these data names. Together the data name and value are called a data item. A separate document, the CIF (or pdCIF) dictionary defines the meaning of each data name. If a value does not contain any spaces, may be specifed without quotes, but either single or double quotes may be used to delimit strings. A data value of one ore more lines is quoted with semicolon characters (;). The two semicolons must be the first character on each line and the final semicolon is expected to be followed by a white-space character such as a space or then end-of-line. With the exception of semicolon delimiters, which must be the first character of a line to be recognized, CIF treats multiple spaces, blank lines and other "white-space" characters as a single space.

The following lines give examples of a few CIF data items.

_pd_calc_method   'Rietveld Refinement'

_cell_volume   1811.00(5)

_symmetry_space_group_name_H-M   "I a 3 d"

;   GSAS Background function number 1 with 4 terms.
 Shifted Chebyshev function of 1st kind
      1:    139.025     2:   -11.5408     3:    9.75652     4:    3.90497    
CIF also allows multiple values to be associated with a CIF data item. This is done by preceding the data name with the keyword loop_. If two or more data names follow the loop_ keyword, a table can be constructed, as is shown in the following examples.
loop_  _symmetry_equiv_pos_as_xyz
       +x,+y,+z     +z,+x,+y 
       +y,+z,+x     +x+1/2,+y,-z+1/2 

Y1      0.125        0.0          0.25     
FE2     0.0          0.0          0.0      
AL3     0.375        0.0          0.25     
O4     -0.02946(5)   0.05385(5)   0.15068(6)
Finally, it should be pointed out that two values in CIF have special meanings. If a value is supplied as a single period (.), the meaning is the value is not defined or is inappropriate. If the value is a question mark (?), this means that the value is unknown or not specified.

For more information, see: The CIF home page; short intros to pdCIF & CIF syntax
EXPGUI top Previous page

Comments, corrections or questions: crystal@NIST.gov
$Revision: 635 $ $Date: 2009-12-04 23:09:28 +0000 (Fri, 04 Dec 2009) $