GSAS Nickel example using EXPGUI (part 2)
2. Add a phase to the Experiment
The next step is to define a phase. (Note that
in EXPEDT, one must define a phase before reading in
histograms but in EXPGUI, this can be done in either order.)
Switch to the Phase pane, and press the "Add Phase" button.
Enter the appropriate information in the
"add new phase" window and press the Add button.
Since a common source of errors is to improperly format
the space group for GSAS, the generated operators are shown
in a window.
These should be checked.
If you press Redo, you are given a chance to correct
the space group.
Since the operators above are correct,
press the Continue button and the
phase is added and the output created from adding the
phase is shown in a window. Press OK to continue.
Press the "1" button that has just been added to
the Phase pane to display the phase you have just entered.
While we could add atoms to the phase now, this will be done later to
keep in sync with the GSAS tutorial.
Create a GSAS Experiment File
Add data (histograms) to the Experiment
Brian Toby (Brian.Toby@NIST.GOV)
$Revision: 158 $ $Date: 2009-12-04 23:01:22 +0000 (Fri, 04 Dec 2009) $