Changeset 94 for trunk/doc/expgui_intro.html

Timestamp:

Dec 4, 2009 5:00:18 PM (14 years ago)

Author:

toby

Message:

# on 1999/07/21 16:51:57, toby did:
add phase... update

File:

• trunk/doc/expgui_intro.html (modified) (3 diffs, 3 props)

trunk/doc/expgui_intro.html

@@ -16 +16 @@
 shell. EXPGUI is not a replacement for the GSAS program EXPEDT, as there
 are many things that EXPGUI cannot do. I have tried to put most of the
-actions that I use most frequently and that could be easily accomodated
+actions that I use most frequently and that could be easily accommodated
 into EXPGUI.</blockquote>
 
@@ -49 +49 @@
 <i>Least-Squares options:</i> control the number of cycles, the print options
 and F<sub>obs</sub> extraction parameters.</dt>
+
+<dt>
+<IMG SRC="new.gif" HEIGHT=13 WIDTH=36>
+Creating new .EXP files and adding phases, histograms and atoms.</dt>
+
 </blockquote>
 
 <p><br>So what can't EXPGUI do?
-<blockquote>Much more than it can do. At this time, EXPGUI can't be used
-to add a histogram or phase to a .EXP file; nor can it add or delete atoms,
-It cannot create or edit soft or hard constraints. It cannot be used on
+<blockquote>Much more than it can do. At this time, EXPGUI can't 
+delete atoms or change their type.
+It cannot create or edit soft constraints
+or hard constraints. It cannot be used on
 phases with magnetic scattering or on single-crystal histograms. It can't
-even change the profile function number.
+even change the profile function number. It also can't change the 
+excluded data regions.
 <p>I hope to add some of these capabilities in the future, but EXPEDT is
 a huge program and it is unlikely that anyone will replace it any time
-soon. Adding atoms, phases, histograms will likely require some FORTRAN
-coding which makes it hard to support all the various platforms unless
-LANSCE gets involved.</blockquote>
+soon. I will consider adding more functionality if requested and the job
+is reasonably tractable.
+</blockquote>
 
 <p><br>What type of computers will EXPGUI run on?
@@ -86 +93 @@
 <p>Neither the author nor the U.S. Government makes any warranty, expressed
 or implied, or assumes any liability or
-<br>responsibility for the use of this information or the software described
+responsibility for the use of this information or the software described
 here. Brand names cited here are used for
-<br>identification purposes and do not consitute an endorsement by NIST.
+identification purposes and do not constitute an endorsement by NIST.
 <p><a href="http://www.ncnr.nist.gov/~toby/">Brian Toby</a> (<a href="mailto:brian.toby@nist.gov">Brian.Toby@NIST.GOV</a>)
 <br>$Revision$ $Date$