Changeset 734

Dec 4, 2009 5:11:07 PM (14 years ago)

# on 2003/08/11 19:36:54, toby did:
exit LANL
misc updates

1 edited


  • trunk/doc/expgui_Win_readme.html

    • Property rcs:date changed from 2002/07/18 20:21:51 to 2003/08/11 19:36:54
    • Property rcs:lines changed from +22 -3 to +37 -54
    • Property rcs:rev changed from 1.22 to 1.23
    r614 r734  
    9191<A Href="">
    92 GSAS</A> from
    93 <A HREF=""></A>
    94 (~6 Mbytes)<BR>
    95 and read<BR>
    96 <A HREF=""></A>
    97 <P>
    98 Mirrors for these files can be found at
    99 <P><A HREF="
    101 ">
    103 </A><BR>
    104 or
    105 <A HREF="
    107 ">
    109 </A><P>and<P><A HREF="
    111 ">
    113 </A><BR>
    114 or
    115 <A HREF="
    117 ">
    119 </A><BR><P>
    120 <em>
    121 Note that the links for these files are on non-NIST servers.
    122 </em>
     92GSAS</A> from one of the following sites:
     96<A HREF=""></A>
     98<A HREF=""></A>
     101<A HREF=""></A>
     104<A HREF=""></A>
     107<A HREF=""></A>
     110<P>be sure to read
     111<A HREF=""></A>
    123113<P><LI>Get a
    124114<A Href="">
    144134but this may lag behind the .ZIP version or may not be present.)
    146 <P><LI>
    147 If you have a version of GSAS from September 2001, or earlier and wish
    148 to set up dummy histograms from EXPEDT, you will need to
    149 update the EXPTOOL program using one of the following files:
    150 <BR>
    151 <A HREF=""></A> (~300 K bytes)
    152 <BR>
    153 or <A HREF=""></A> (~700 K bytes)
    154 </UL>
    155 <P>
    156136You can put these .EXE (and .ZIP) files anywhere on your computer, but make a note of the
    157137locations for steps 2, 3 and 5, below.
    159139<P><B>2. Run the programs</B>
    160140<UL>Use a DOS window to run, gsaskit.exe,
    183163other names, but the expgui files in expgui.exe
    184164<I><U>must</U></I> be located in a subdirectory of the GSAS files and
    185 each directory name <I><U>must</U></I> be 8 characters or less, so
    186 location
    187 <font face="courier">Z:\i\think\this\will\work\gsas</font> should be OK, but
    188 <font face="courier">C:\longwindows\namesarenotgood\for dos</font> probably
    189 will not work.
     165each directory name should not have a space in the name
     166so location
     167<font face="courier">Z:\i\think\this\will\work\gsas</font> should be OK,
     168as should
     169<font face="courier">C:\longwindows\namesarenotgood\fordos</font>
     170but you may have trouble with<BR>
     171<font face="courier">C:\Program Files\names with spaces\make problems</font>
     172probably will break drag-and-drop -- at least for EXPGUI.
    190173If these files will be located on a fileserver, the file server
    191174must be mapped to appear as a disk drive (must be assigned a name
    192 such as F:).
    193 <P>
    194 If you downloaded, unpack it and copy it to
    195 <font face="courier">c:\gsas\exe</font>, or if you downloaded exptool.exe, it can be copied
    196 directly to <font face="courier">c:\gsas\exe</font>.
     175such as F:). But note, installing GSAS on a file server does not
     176fully install
     177GSAS on each PC that accesses the file server, since short-cuts and
     178environment changes are needed.
    198180<P><B>3. Create a shortcut:</B>
    256238<UL>Only if you will use the PC-GSAS program as well as EXPGUI.
    257239If so, do follow the steps in the
    258 <A HREF="">GSAS readme file</A>)
     240<A HREF="">
     241GSAS readme file</A>)
    260243Note, to add more environment space in Win95/98, add the following line to the
    348331Los Alamos National Laboratory, Los Alamos, NM 87545. Problems, questions
    349332or kudos concerning GSAS should be sent to Robert B. Von Dreele at
    350 <A HREF=""></A>
     333<A HREF=""></A>
    351334<P>EXPGUI is written by Brian H. Toby of the NIST Center for Neutron Research,
    352335<A HREF="MAILTO:Brian.Toby@NIST.GOV">Brian.Toby@NIST.GOV</A>
Note: See TracChangeset for help on using the changeset viewer.