Changeset 653

Timestamp:

Dec 4, 2009 5:09:46 PM (13 years ago)

Author:

toby

Message:

# on 2002/09/06 19:42:17, toby did:
update with recent request & EXPGUI changes

File:

• trunk/doc/wishlist.html (modified) (8 diffs, 3 props)

trunk/doc/wishlist.html

@@ -38 +38 @@
 for a complete list of all changes for the source files.
 
-<H2>Requested EXPGUI improvements 2001-</H2><DL>
+<H2>Requested EXPGUI improvements</H2><DL>
 The suggested improvements obtained from EXPGUI users are listed here. 
-Prioritization is based in part on input from users.
+Prioritization is based in part on input from users, from back when 
+EXPGUI development was supported by NIST via ATP intramural program.
+At present EXPGUI development is progressing slowly, since the work 
+is not funded.
+<P>
+In the list below, dates for requests are noted in parenthesis when known.
 Additional suggestions and input on priorities are welcome; send them to
 the author of EXPGUI, 
 <a href="mailto:brian.toby@nist.gov?subject=EXPGUI suggestions">Brian.Toby@NIST.GOV</a>
+<H3>Requests, 2002</H3><DL>
+<UL>
+<LI> Adding Profile constraints -- dummy out profile functions that are not present (7/02)
+
+<LI> Update LSTVIEW plots with latest refinements (7/02)
+
+<LI> Allow setting the "anisotropic broadening axis" for sfec, ptec,... (7/02)
+
+<LI> Display Rwp in LSTVIEW & EXPGUI (7/02)
+
+<LI> Allow setting up DISAGL controls; in particular flag for inclusion 
+of Fourier peaks [EXPEDT: K D D F] (7/02)
+
+<LI> Least Squares options: atom shift limits [enable/disable] (5/02)
+
+<LI> Histogram weighting (5/02)
+
+<LI> Least Squares options commonly needed for single crystal work (3/02)
+<OL>
+<LI> F   - Change minimization function 
+<LI> N n - Lower D-spacing limit 
+<LI> R   - Change the weight modification flag, Robust 
+<LI> S n - Set a Lower I/SigI cut-off in RFN-F 
+<LI> W n - Refinement weight option "n" 
+</OL>
+
+<LI> List single crystal histograms; useful options/parameters are: 
+use/ignore flag, scale factor, damping & refinement flag (3/02)
+
+<LI> Show cursor position in Liveplot (1/02)
+<font color=red>(done)</font>
+
+<LI> Label LIVEPLOT phase by phase name (1/02)
+<font color=red>(done)</font>
+</UL>
+</DL>
+<H3>Requests, 2001 and before</H3><DL>
 <H4>
 Highest 
@@ -87 +129 @@
 <font color=red>(done)</font>
 
+<LI> Support dummy histograms for powder simulations
+<font color=red>(done)</font>
+
+<LI> Revisit GSAS2CIF to export results to CIF
+<font color=red>(done)</font>
+
+<LI> Show status information (R-factors & dates) from selected .EXP files & 
+.Oxx files
+<font color=red>(done)</font>
+
+<LI> Rework coordinate export interface
+<font color=red>(done)</font>
+
+<LI>Support more coordinate export formats (.SPF & SHELX for Platon & CrystalMaker)
+<font color=red>(done)</font>
+
+<LI> Support dummy histograms in EXCLEDT
+<font color=red>(done)</font>
+
+<LI> Plot absorption corrections (11/01)
+<font color=red>(done)</font>
+
+<LI> Delete .LST flags in lstview (12/01)
+<font color=red>(done)</font>
+
 <LI> Add GUI support for bond-distance soft constraints
 [a major project]
 
-<LI> Support dummy histograms for powder simulations
-<font color=red>(done)</font>
-
 <LI> "finalplot" program for publication-quality output
 
 <LI> Import diffraction data from CIFs 
-
-<LI> Revisit GSAS2CIF to export results to CIF
-<font color=red>(done)</font>
-
-<LI> Show status information (R-factors & dates) from selected .EXP files & 
-.Oxx files
-<font color=red>(done)</font>
 
 <LI> Fourier Transform interface, 
@@ -108 +165 @@
 point later think about map viewing options.
 
-
-<LI> Rework coordinate export interface
-<font color=red>(done)</font>
-
-<LI>Support more coordinate export formats (.SPF & SHELX for Platon & CrystalMaker)
-<font color=red>(done)</font>
-
-<LI> Support dummy histograms in EXCLEDT
-<font color=red>(done)</font>
-
-
-<LI> Delete .LST flags in lstview (req. Dec 2001)
-<font color=red>(done)</font>
-
-<LI> Plot absorption corrections (req. Nov 2001)
-<font color=red>(done)</font>
-
-<LI> Show cursor position in Liveplot (req. Jan 2002)
-<font color=red>(done)</font>
-
 </UL><h4>
 Low
@@ -135 +172 @@
 <font color=red>(done)</font>
 
+<LI> log/graph parameter shifts vs cycle
+<font color=red>(done)</font>
+
 <LI> instrument parameter file editor
 
@@ -143 +183 @@
 
 <LI> export Le Bail reflection intensities to SHELX & EXPO formats
-
-<LI> log/graph parameter shifts vs cycle
-<font color=red>(done)</font>
 
 <LI> "wizard" that would lead new users through the steps of 
@@ -151 +188 @@
         are solicited.
 
-<LI> Label LIVEPLOT phase by phase name (req. Jan 2002)
-<font color=red>(done)</font>
-
-<LI> Adding Profile constraints -- dummy out profile functions that are not present (7/2002)
-
-<LI> Update LSTVIEW plots with latest data (7/02)
-
 </UL><h4>
 Not Planned
@@ -163 +193 @@
 
 <LI> Shelx style disagl output
+<font color=red>(done, <a href="gsas2cif.html#cifselect">see CIFSelect</a>)</font>
 
 <LI> point & click GUI-Forplot
@@ -173 +204 @@
 
 <H2>RECENT ADDITIONS TO EXPGUI</H2><DL>
-Additional features added to EXPGUI since mid-2000 are listed here,
+Additional features & fixes added to EXPGUI since mid-2000 are listed here,
 with an approximate date the features were added and the EXPGUI version
-where the feature was added. This list includes only the major changes.
+where the feature was added. This list includes only the more significant 
+changes.
 For a complete list of all changes for the source files
-see <A HREF="revlog.html">the EXPGUI Revision log</A>
+see <A HREF="revlog.html">the EXPGUI Revision log.</A>
 <P>
 <DT>
 <DD>
 
-<DT>GSAS2CIF & FillCIF 
-<DD>The GSAS2CIF program has been rewritten and the FillCIF utility
-has been created to edit the new CIF templates. A new GSAS2CIF web
-page created to describe the process.
-(7/2002, 1.56)
+<DT>GSAS2CIF, FillCIF & CIFSelect
+<DD>The GSAS2CIF program has been rewritten, the FillCIF utility
+has been created to edit the new CIF templates
+and the new CIFSelect utility is provided to edit distance & angle publication
+flags. A new <a href="gsas2cif.html">GSAS2CIF web page</A> has been created to describe the process.
+(9/2002, 1.58)
+
+<DT>Export to FOX
+<DD>EXPGUI can now export to the version of XML that is used in 
+FOX (Free Objects for Xtallography, objcryst.sourceforge.net). 
+(9/2002, 1.58)
+
+<DT>Fix profile constraint bug
+<DD>Profile constraints now must have a histogram & phase selected; 
+defaults are used, where appropriate.
+(9/2002, 1.58)
 
 <DT>Profile Constraint bug fixes