Changeset 552 for trunk/doc/liveplot.html

Timestamp:

Dec 4, 2009 5:08:05 PM (11 years ago)

Author:

toby

Message:

# on 2002/01/23 20:00:50, toby did:
clean up font references

File:

• trunk/doc/liveplot.html (modified) (8 diffs, 3 props)

trunk/doc/liveplot.html

@@ -134 +134 @@
 </DL></DL>
 As background points are entered, they are saved in a file named 
-<I>EXPNAM</I><tt>.bkg</tt><I>N</I>, where 
+<I>EXPNAM</I><font face="courier">.bkg</font><I>N</I>, where 
 <I>EXPNAM</I> is the experiment name and <I>N</I> is the histogram number.
 If BKGEDIT is restarted at some later time, these points are reread.
@@ -220 +220 @@
 BKGEDIT can be used to generate these fixed background points.
 The file used by BKGEDIT to save these points, 
-<I>EXPNAM</I><tt>.bkg</tt><I>N</I>,
+<I>EXPNAM</I><font face="courier">.bkg</font><I>N</I>,
 will define the background points if read directly into EXPEDT 
 by typing "@R" at the initial prompt in EXPEDT:
-<PRE>
-   Is this the file you wish to use? (<?>,D,K,Q,R,Y) ><u>@r</u>
-</PRE>
+<FONT FACE="COURIER"><PRE>
+   Is this the file you wish to use? (?,D,K,Q,R,Y) ><u>@r</u>
+</PRE></FONT>
 prompt and then supplying the name of the file, in response to the next prompt:
-<PRE>
+<FONT FACE="COURIER"><PRE>
    Enter the name of your macro file: <u>GARNET.bkg1</u>
-</PRE>
+</PRE></FONT>
 Doing this will cause the background points you entered into BKGEDIT to 
 be used in GSAS
@@ -456 +456 @@
 (as <a href="#Cchi2">presented above</a>).
 <DT>Save Options
-<DD>Causes many of the options set in this menu to be saved in the <TT>.gsas_config</TT> file.
+<DD>Causes many of the options set in this menu to be saved in the <FONT FACE="COURIER">.gsas_config</FONT> file.
 </DL></DL>
 <br clear=all>
@@ -462 +462 @@
 <P>
 <hr><H2>Customization of LIVEPLOT & BKGEDIT</H2><A NAME="customize"></A>
-The <TT>localconfig</TT> and <TT>.gsas_config</TT> files are read, if present.
+The <FONT FACE="COURIER">localconfig</FONT> and <FONT FACE="COURIER">.gsas_config</FONT> files are read, if present.
 The following variables control how LIVEPLOT, and in most cases BKGEDIT, 
 function and can be 
 customized by changing their values in the 
-<TT>localconfig</TT> and <TT>.gsas_config</TT> files.
+<FONT FACE="COURIER">localconfig</FONT> and <FONT FACE="COURIER">.gsas_config</FONT> files.
 Note that some of these options are relevant only if the tcldump program is 
 present. 
 <DL><DL>
-<DT><TT>peakinfo(flag<i>n</i>)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(flag<i>n</i>)</FONT><DD>
 These variables define if peak positions will be shown 
 for reflections in phase "<i>n</i>". Reflections will be shown if
 the value is non-zero.
 
-<DT><TT>peakinfo(color<i>n</i>)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(color<i>n</i>)</FONT><DD>
 These variables define the default colors for 
 reflections in phase "<i>n</i>"
 
-<DT><TT>peakinfo(dashes<i>n</i>)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(dashes<i>n</i>)</FONT><DD>
 These variables define if peaks will be dashed for 
 reflections in phase "<i>n</i>" (UNIX only). Lines will be dashed if
 the value is non-zero.
 
-<DT><TT>peakinfo(min<i>n</i>) and peakinfo(max<i>n</i>)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(min<i>n</i>) and peakinfo(max<i>n</i>)</FONT><DD>
 These variables dictate the placement vertical position for reflection
 markers, when manually placed (see expgui(autotick), below). To draw
@@ -490 +490 @@
 </DL></DL>
 
-The following variables are written to <tt>.gsas_config</tt> when 
+The following variables are written to <font face="courier">.gsas_config</font> when 
 "Save Options" is used. These variables are all set from the GUI and therefore
 do not need to be edited manually. 
 
 <DL><DL>
-<DT><TT>graph(printout)</TT><DD>
+<DT><FONT FACE="COURIER">graph(printout)</FONT><DD>
 This is set to 1 if PostScript files 
 will be printed and 0 if they will be written to disk (for Windows all
 files should be written to disk).
 
-<DT><TT>graph(outname)</TT><DD>
+<DT><FONT FACE="COURIER">graph(outname)</FONT><DD>
 This is the default for the file name used
 when PostScript files will be written to disk.
 
-<DT><TT>graph(outcmd)</TT><DD>
+<DT><FONT FACE="COURIER">graph(outcmd)</FONT><DD>
 This is the default for the command used
 to print PostScript files (Unix only). 
 
-<DT><TT>graph(legend)</TT><DD>
+<DT><FONT FACE="COURIER">graph(legend)</FONT><DD>
 Sets the default value for display of the legend in LIVEPLOT and WIDPLT.
 
-<DT><TT>graph(autoraise)</TT><DD>
+<DT><FONT FACE="COURIER">graph(autoraise)</FONT><DD>
 This option shows up in the options menu item as "Raise on update."
 When set to non-zero, the LIVEPLOT window is raised 
@@ -519 +519 @@
 the version of Tcl/Tk.
 
-<DT><TT>peakinfo(obssym)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(obssym)</FONT><DD>
 Symbol for observed data points. Valid choices are square, circle, diamond, 
 plus, cross, splus and scross.
 
-<DT><TT>peakinfo(obssize)</TT><DD>
+<DT><FONT FACE="COURIER">peakinfo(obssize)</FONT><DD>
 Size for the symbol for observed data points. A value of 1 corresponds to about 1/8 inch
 (about 3 mm).
 
-<DT><TT>expgui(pixelregion)</TT><DD>
+<DT><FONT FACE="COURIER">expgui(pixelregion)</FONT><DD>
 When hkl values are loaded (using tcldump) and reflections are labeled, reflections 
 can be labeled using a Shift-Left-Mouse click. All labeled reflections within expgui(pixelregion)
 pixels of the mouse position are assumed to be overlapped and are labeled.
 
-<DT><TT>expgui(fadetime)</TT><DD>
+<DT><FONT FACE="COURIER">expgui(fadetime)</FONT><DD>
 The time in seconds before reflection labels are removed. A value of zero means that reflections
 must be deleted manually (Shift-Right-Mouse).
 
-<DT><TT>expgui(lblfontsize)</TT><DD>
+<DT><FONT FACE="COURIER">expgui(lblfontsize)</FONT><DD>
 A size for reflections labels in pixels.
 
-<DT><TT>expgui(hklbox)</TT><DD>
+<DT><FONT FACE="COURIER">expgui(hklbox)</FONT><DD>
 If this variable is non-zero, reflection indices are shown in a box.
 
-<DT><TT>expgui(autotick)</TT><DD>
+<DT><FONT FACE="COURIER">expgui(autotick)</FONT><DD>
 If this variable is non-zero, reflection markers positions are 
 set automatically.
@@ -572 +572 @@
 For UNIX, create a link from in the EXPGUI
 directory to file cellgen.tcl in the CMPR directory. For example:
-<PRE>
+<FONT FACE="COURIER"><PRE>
    ln -s /usr/local/cmpr/cellgen.tcl /usr/local/gsas/expgui/cellgen.tcl 
-</PRE>
+</PRE></FONT>
 <LI>For Windows, copy all the .tcl and .exe files from the CMPR directory
 into the EXPGUI directory.
@@ -592 +592 @@
 For UNIX, create a link from in the GSAS GUI 
 directory to file icddcmd.tcl in the LOGIC directory. For example:
-<PRE>
+<FONT FACE="COURIER"><PRE>
    ln -s /usr/local/powdersuite/icddcmd.tcl /usr/local/gsas/expgui/icddcmd.tcl 
-</PRE>
+</PRE></FONT>
 <LI>For Windows, copy all the LOGIC files into the EXPGUI directory.
 </UL>