Changeset 552


Ignore:
Timestamp:
Dec 4, 2009 5:08:05 PM (11 years ago)
Author:
toby
Message:

# on 2002/01/23 20:00:50, toby did:
clean up font references

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/doc/liveplot.html

    • Property rcs:date changed from 2002/01/22 21:02:55 to 2002/01/23 20:00:50
    • Property rcs:lines changed from +115 -38 to +32 -32
    • Property rcs:rev changed from 1.8 to 1.9
    r520 r552  
    134134</DL></DL>
    135135As background points are entered, they are saved in a file named
    136 <I>EXPNAM</I><tt>.bkg</tt><I>N</I>, where
     136<I>EXPNAM</I><font face="courier">.bkg</font><I>N</I>, where
    137137<I>EXPNAM</I> is the experiment name and <I>N</I> is the histogram number.
    138138If BKGEDIT is restarted at some later time, these points are reread.
     
    220220BKGEDIT can be used to generate these fixed background points.
    221221The file used by BKGEDIT to save these points,
    222 <I>EXPNAM</I><tt>.bkg</tt><I>N</I>,
     222<I>EXPNAM</I><font face="courier">.bkg</font><I>N</I>,
    223223will define the background points if read directly into EXPEDT
    224224by typing "@R" at the initial prompt in EXPEDT:
    225 <PRE>
    226    Is this the file you wish to use? (<?>,D,K,Q,R,Y) ><u>@r</u>
    227 </PRE>
     225<FONT FACE="COURIER"><PRE>
     226   Is this the file you wish to use? (?,D,K,Q,R,Y) ><u>@r</u>
     227</PRE></FONT>
    228228prompt and then supplying the name of the file, in response to the next prompt:
    229 <PRE>
     229<FONT FACE="COURIER"><PRE>
    230230   Enter the name of your macro file: <u>GARNET.bkg1</u>
    231 </PRE>
     231</PRE></FONT>
    232232Doing this will cause the background points you entered into BKGEDIT to
    233233be used in GSAS
     
    456456(as <a href="#Cchi2">presented above</a>).
    457457<DT>Save Options
    458 <DD>Causes many of the options set in this menu to be saved in the <TT>.gsas_config</TT> file.
     458<DD>Causes many of the options set in this menu to be saved in the <FONT FACE="COURIER">.gsas_config</FONT> file.
    459459</DL></DL>
    460460<br clear=all>
     
    462462<P>
    463463<hr><H2>Customization of LIVEPLOT & BKGEDIT</H2><A NAME="customize"></A>
    464 The <TT>localconfig</TT> and <TT>.gsas_config</TT> files are read, if present.
     464The <FONT FACE="COURIER">localconfig</FONT> and <FONT FACE="COURIER">.gsas_config</FONT> files are read, if present.
    465465The following variables control how LIVEPLOT, and in most cases BKGEDIT,
    466466function and can be
    467467customized by changing their values in the
    468 <TT>localconfig</TT> and <TT>.gsas_config</TT> files.
     468<FONT FACE="COURIER">localconfig</FONT> and <FONT FACE="COURIER">.gsas_config</FONT> files.
    469469Note that some of these options are relevant only if the tcldump program is
    470470present.
    471471<DL><DL>
    472 <DT><TT>peakinfo(flag<i>n</i>)</TT><DD>
     472<DT><FONT FACE="COURIER">peakinfo(flag<i>n</i>)</FONT><DD>
    473473These variables define if peak positions will be shown
    474474for reflections in phase "<i>n</i>". Reflections will be shown if
    475475the value is non-zero.
    476476
    477 <DT><TT>peakinfo(color<i>n</i>)</TT><DD>
     477<DT><FONT FACE="COURIER">peakinfo(color<i>n</i>)</FONT><DD>
    478478These variables define the default colors for
    479479reflections in phase "<i>n</i>"
    480480
    481 <DT><TT>peakinfo(dashes<i>n</i>)</TT><DD>
     481<DT><FONT FACE="COURIER">peakinfo(dashes<i>n</i>)</FONT><DD>
    482482These variables define if peaks will be dashed for
    483483reflections in phase "<i>n</i>" (UNIX only). Lines will be dashed if
    484484the value is non-zero.
    485485
    486 <DT><TT>peakinfo(min<i>n</i>) and peakinfo(max<i>n</i>)</TT><DD>
     486<DT><FONT FACE="COURIER">peakinfo(min<i>n</i>) and peakinfo(max<i>n</i>)</FONT><DD>
    487487These variables dictate the placement vertical position for reflection
    488488markers, when manually placed (see expgui(autotick), below). To draw
     
    490490</DL></DL>
    491491
    492 The following variables are written to <tt>.gsas_config</tt> when
     492The following variables are written to <font face="courier">.gsas_config</font> when
    493493"Save Options" is used. These variables are all set from the GUI and therefore
    494494do not need to be edited manually.
    495495
    496496<DL><DL>
    497 <DT><TT>graph(printout)</TT><DD>
     497<DT><FONT FACE="COURIER">graph(printout)</FONT><DD>
    498498This is set to 1 if PostScript files
    499499will be printed and 0 if they will be written to disk (for Windows all
    500500files should be written to disk).
    501501
    502 <DT><TT>graph(outname)</TT><DD>
     502<DT><FONT FACE="COURIER">graph(outname)</FONT><DD>
    503503This is the default for the file name used
    504504when PostScript files will be written to disk.
    505505
    506 <DT><TT>graph(outcmd)</TT><DD>
     506<DT><FONT FACE="COURIER">graph(outcmd)</FONT><DD>
    507507This is the default for the command used
    508508to print PostScript files (Unix only).
    509509
    510 <DT><TT>graph(legend)</TT><DD>
     510<DT><FONT FACE="COURIER">graph(legend)</FONT><DD>
    511511Sets the default value for display of the legend in LIVEPLOT and WIDPLT.
    512512
    513 <DT><TT>graph(autoraise)</TT><DD>
     513<DT><FONT FACE="COURIER">graph(autoraise)</FONT><DD>
    514514This option shows up in the options menu item as "Raise on update."
    515515When set to non-zero, the LIVEPLOT window is raised
     
    519519the version of Tcl/Tk.
    520520
    521 <DT><TT>peakinfo(obssym)</TT><DD>
     521<DT><FONT FACE="COURIER">peakinfo(obssym)</FONT><DD>
    522522Symbol for observed data points. Valid choices are square, circle, diamond,
    523523plus, cross, splus and scross.
    524524
    525 <DT><TT>peakinfo(obssize)</TT><DD>
     525<DT><FONT FACE="COURIER">peakinfo(obssize)</FONT><DD>
    526526Size for the symbol for observed data points. A value of 1 corresponds to about 1/8 inch
    527527(about 3 mm).
    528528
    529 <DT><TT>expgui(pixelregion)</TT><DD>
     529<DT><FONT FACE="COURIER">expgui(pixelregion)</FONT><DD>
    530530When hkl values are loaded (using tcldump) and reflections are labeled, reflections
    531531can be labeled using a Shift-Left-Mouse click. All labeled reflections within expgui(pixelregion)
    532532pixels of the mouse position are assumed to be overlapped and are labeled.
    533533
    534 <DT><TT>expgui(fadetime)</TT><DD>
     534<DT><FONT FACE="COURIER">expgui(fadetime)</FONT><DD>
    535535The time in seconds before reflection labels are removed. A value of zero means that reflections
    536536must be deleted manually (Shift-Right-Mouse).
    537537
    538 <DT><TT>expgui(lblfontsize)</TT><DD>
     538<DT><FONT FACE="COURIER">expgui(lblfontsize)</FONT><DD>
    539539A size for reflections labels in pixels.
    540540
    541 <DT><TT>expgui(hklbox)</TT><DD>
     541<DT><FONT FACE="COURIER">expgui(hklbox)</FONT><DD>
    542542If this variable is non-zero, reflection indices are shown in a box.
    543543
    544 <DT><TT>expgui(autotick)</TT><DD>
     544<DT><FONT FACE="COURIER">expgui(autotick)</FONT><DD>
    545545If this variable is non-zero, reflection markers positions are
    546546set automatically.
     
    572572For UNIX, create a link from in the EXPGUI
    573573directory to file cellgen.tcl in the CMPR directory. For example:
    574 <PRE>
     574<FONT FACE="COURIER"><PRE>
    575575   ln -s /usr/local/cmpr/cellgen.tcl /usr/local/gsas/expgui/cellgen.tcl
    576 </PRE>
     576</PRE></FONT>
    577577<LI>For Windows, copy all the .tcl and .exe files from the CMPR directory
    578578into the EXPGUI directory.
     
    592592For UNIX, create a link from in the GSAS GUI
    593593directory to file icddcmd.tcl in the LOGIC directory. For example:
    594 <PRE>
     594<FONT FACE="COURIER"><PRE>
    595595   ln -s /usr/local/powdersuite/icddcmd.tcl /usr/local/gsas/expgui/icddcmd.tcl
    596 </PRE>
     596</PRE></FONT>
    597597<LI>For Windows, copy all the LOGIC files into the EXPGUI directory.
    598598</UL>
Note: See TracChangeset for help on using the changeset viewer.