Ignore:
Timestamp:
Dec 4, 2009 5:07:07 PM (11 years ago)
Author:
toby
Message:

# on 2001/12/16 18:15:31, toby did:
liveplot: explain the "FORTRAN" error

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/doc/expguierr.html

    • Property rcs:date changed from 2001/10/18 23:17:12 to 2001/12/16 18:15:31
    • Property rcs:lines changed from +10 -8 to +23 -1
    • Property rcs:rev changed from 1.6 to 1.7
    r463 r495  
    353353
    354354<br clear=all>
     355<a name="TCLDUMPError"></a>
     356<h3>Error running TCLDUMP (LIVEPLOT or BKGEDIT)</h3>
     357<DL><DL>
     358The program TCLDUMP (or program HSTDMP if TCLDUMP is not found) is used to read
     359the binary <I>expnam</I>.Pxx and <I>expnam</I>.Rxx files produced by
     360POWPREF and GENLES so that refinement results can be plotted.
     361If there is an error reading these files, an error message is produced
     362reading "There was an error running the TCLDUMP program..."
     363and the text of the error message reads something like
     364"Invalid command name 'FORTRAN'".
     365The most common reason for this error is that the
     366<I>expnam</I>.Pxx and <I>expnam</I>.Rxx files do not exist (because you have
     367not run POWPREF or have moved/renamed the .EXP file. It is possible,
     368but less common for this error to occur if TCLDUMP tries to read files
     369produced by an older version of GSAS (since the internal format of the
     370binary files sometimes changes). If you see this message, run POWPREF & GENLES
     371to force these files to be written. If the GSAS results can be plotted in
     372POWPLOT, but not in LIVEPLOT or BKGEDIT, please contact Brian Toby at
     373<a href="mailto:brian.toby@nist.gov">Brian.Toby@NIST.GOV</a>.
     374</DL></DL>
     375
     376<br clear=all>
    355377<a name=""></a>
    356378<h3></h3>
Note: See TracChangeset for help on using the changeset viewer.