Changeset 435


Ignore:
Timestamp:
Dec 4, 2009 5:06:07 PM (11 years ago)
Author:
toby
Message:

# on 2001/09/04 23:06:17, toby did:
spelling
Data Range & Excluded Regions

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/doc/expgui3.html

    • Property rcs:date changed from 2001/06/29 18:23:57 to 2001/09/04 23:06:17
    • Property rcs:lines changed from +11 -2 to +16 -6
    • Property rcs:rev changed from 1.7 to 1.8
    r402 r435  
    8181<h3>A.3.1 Editing background</h3>
    8282<DL><DL>
    83 <img SRC="3b.gif" align=TEXTOP alt="EXPGUI Screen snapshot">
     83<img SRC="3b1.gif" align=TEXTOP alt="EXPGUI Screen snapshot">
    8484When the button labeled "Edit Background", (or "Globally Edit Background"
    8585or in the case where <A href="expgui.html#multiplehistogram">
     
    114114<img SRC="3d.gif" align=LEFT alt="EXPGUI Screen snapshot">
    115115The dialog to the left shows how
    116 a difractometer constant can be
     116a diffractometer constant can be
    117117edited for more than one histogram
    118118(<A href="expgui.html#multiplehistogram">
     
    135135data value to be considered, must be entered. Note that the
    136136units for the maximum (minimum for d-spaces) must also be selected.
    137 To view a data file, to see the extent of the data, the "Run RAWPLOT"
    138 button may be used. Note that EXPGUI cannot communicate the names
     137(This can be edited at a later time using the
     138<a href="excledt.html">EXCLEDT</a> utility.)
     139<P>
     140To view a plot of a data file, so that the range of the data
     141may be viewed, the RAWPLOT program may be invoked using the "Run RAWPLOT"
     142button. Note that EXPGUI cannot communicate the names
    139143of the data and instrument parameter files to RAWPLOT, so they must be
    140144reentered.
     
    143147If errors are detected in the input, an error message is displayed detailing where
    144148the errors are found. Otherwise, the EXPTOOL program is run.
    145 
    146  and the output is displayed
     149and the output is displayed
     150</DL></DL>
     151<h3>A.3.4 Editing the Data Range & Excluded Regions</h3>
     152<DL><DL>
     153The button at the bottom of the pane, labeled "Data Limits/Exclude" invokes
     154the <a href="excledt.html">EXCLEDT</a> utility, which is used to
     155modify the lower and upper data limits and can be used to add or delete
     156excluded regions.
    147157</DL></DL>
    148158<hr>
Note: See TracChangeset for help on using the changeset viewer.