Changeset 410

Timestamp:

Dec 4, 2009 5:05:42 PM (11 years ago)

Author:

toby

Message:

# on 2001/08/24 18:56:53, toby did:
updates

File:

• trunk/doc/expgui_cfg.html (modified) (1 diff, 3 props)

trunk/doc/expgui_cfg.html

@@ -335 +335 @@
 
 <hr><H3>LIVEPLOT</H3><A NAME="liveplot"></A>
-The <TT>localconfig</TT> and <TT>.gsas_config</TT> files are read, if present.
-Note that some of these options are relevant only if the tcldump program is 
-present.
-<P>
-The following options are available for customization in these files:
-<DL><DL>
-<DT><TT>peakinfo(flag<i>n</i>)</TT><DD>
-These variables define if peak positions will be shown 
-for reflections in phase "<i>n</i>". Reflections will be shown if
-the value is non-zero.
-
-<DT><TT>peakinfo(color<i>n</i>)</TT><DD>
-These variables define the default colors for 
-reflections in phase "<i>n</i>"
-
-<DT><TT>peakinfo(dashes<i>n</i>)</TT><DD>
-These variables define if peaks will be dashed for 
-reflections in phase "<i>n</i>" (UNIX only). Lines will be dashed if
-the value is non-zero.
-
-<DT><TT>peakinfo(min<i>n</i>) and peakinfo(max<i>n</i>)</TT><DD>
-These variables dictate the placement vertical position for reflection
-markers, when manually placed (see expgui(autotick), below). To draw
-to the edge of the screen, use -Inf and Inf.
-</DL></DL>
-
-The following variables are written to <tt>.gsas_config</tt> when 
-"Save Options" is used. These variables are all set from the GUI and therefore
-do not need to be edited manually. 
-
-<DL><DL>
-<DT><TT>graph(printout)</TT><DD>
-This is set to 1 if PostScript files 
-will be printed and 0 if they will be written to disk (for Windows all
-files should be written to disk).
-
-<DT><TT>graph(outname)</TT><DD>
-This is the default for the file name used
-when PostScript files will be written to disk.
-
-<DT><TT>graph(outcmd)</TT><DD>
-This is the default for the command used
-to print PostScript files (Unix only). 
-
-<DT><TT>graph(legend)</TT><DD>
-Sets the default value for display of the legend in liveplot and widplt.
-
-<DT><TT>graph(autoraise)</TT><DD>
-This option shows up in the options menu item as "Raise on update."
-When set to non-zero, the liveplot window is raised 
-(placed on top of any other overlapping) windows
-each time it is updated.
-This option does not seem to work in Windows-NT, but this may depend on
-the version of Tcl/Tk.
-
-<DT><TT>peakinfo(obssym)</TT><DD>
-Symbol for observed data points. Valid choices are square, circle, diamond, 
-plus, cross, splus and scross.
-
-<DT><TT>peakinfo(obssize)</TT><DD>
-Size for the symbol for observed data points. A value of 1 corresponds to about 1/8 inch
-(about 3 mm).
-
-<DT><TT>expgui(pixelregion)</TT><DD>
-When hkl values are loaded (using tcldump) and reflections are labeled, reflections 
-can be labeled using a Shift-Left-Mouse click. All labeled reflections within expgui(pixelregion)
-pixels of the mouse position are assumed to be overlapped and are labeled.
-
-<DT><TT>expgui(fadetime)</TT><DD>
-The time in seconds before reflection labels are removed. A value of zero means that reflections
-must be deleted manually (Shift-Right-Mouse).
-
-<DT><TT>expgui(lblfontsize)</TT><DD>
-A size for reflections labels in pixels.
-
-<DT><TT>expgui(hklbox)</TT><DD>
-If this variable is non-zero, reflection indices are shown in a box.
-
-<DT><TT>expgui(autotick)</TT><DD>
-If this variable is non-zero, reflection markers positions are 
-set automatically.
-</DL></DL>
-
-<P>
-<B>Using TCLDUMP with LIVEPLOT.</B>
-LIVEPLOT works with the standard GSAS program HSTDMP, but it works faster and is more
-powerful when used with the TCLDUMP program. Instructions for downloading this file can
-be found in the installation notes for 
-<A HREF="expgui_Win_readme.html">
-Windows</A> and
-<A HREF="expgui_Unix_readme.html">
-UNIX</A>. Note that as of the April 2000 releases, GSAS is now distributed 
-with TCLDUMP.
-<P>
-<B>Combining CMPR and LIVEPLOT.</B>
-If you have <A HREF="http://www.ncnr.nist.gov/programs/crystallography/software/cmpr.html">CMPR</A>
-installed on your computer, you can use superimpose on the GSAS results 
-the peaks for an arbitrary unit cell. If desired, space group extinctions 
-can even be shown.
-This is pretty neat! To enable this feature, you must have a version 
-of CMPR downloaded after 4 May 1998 
-<A HREF="http://www.ncnr.nist.gov/programs/crystallography/software/cmpr.html">
-(see the CMPR installation instructions.)</A>
-For UNIX, create a link from in the expgui
-directory to file cellgen.tcl in the CMPR directory. For example:
-<PRE>
-         ln -s /usr/local/cmpr/cellgen.tcl /usr/local/gsas/expgui/cellgen.tcl 
-</PRE>
-For Windows, copy all the CMPR .tcl and .exe files into the expgui directory.
-<P>
-<B>Combining LOGIC and LIVEPLOT</B>
-If you have <A HREF="http://www.ncnr.nist.gov/programs/crystallography/software/logic.html">LOGIC</A>
-installed on your computer, you can superimpose peaks
-for a entry from the ICDD/JCPDS database on a pattern in LIVEPLOT.
-This is also pretty neat! 
-To enable this feature, you must have 
-a version of LOGIC downloaded after 4 May 1998 
-<A HREF="http://www.ncnr.nist.gov/programs/crystallography/software/logic.html">
-(see the LOGIC installation instructions.)</A>
-For UNIX, create a link from in the GSAS GUI 
-directory to file icddcmd.tcl in the LOGIC directory. For example:
-<PRE>
-         ln -s /usr/local/powdersuite/icddcmd.tcl /usr/local/gsas/tcl/icddcmd.tcl 
-</PRE>
-For Windows, copy all the LOGIC files into the expgui directory.
+A description of the customization options for LIVEPLOT can be 
+found in the 
+<A HREF="liveplot.html#customize">
+LIVEPLOT description</A>.
+
+
 <HR>
 <H3>WIDPLT</H3>