Changeset 310

Timestamp:

Dec 4, 2009 5:03:55 PM (14 years ago)

Author:

toby

Message:

# on 2000/10/12 21:15:58, toby did:
add anchors & more text for on-line help

File:

• trunk/doc/expgui3.html (modified) (2 diffs, 3 props)

trunk/doc/expgui3.html

@@ -56 +56 @@
 <img SRC="3.gif" align=TEXTTOP alt="EXPGUI Screen snapshot">
 <P>
+<DL><DL>
 If there is more than one phase present in the refinement, 
 an extra box appears at the top of the pane to allow phase flags
@@ -62 +63 @@
 phase by removing it from all histograms. Be sure to rerun POWPREF after
 changing the phase flags.
+</DL></DL>
 <img SRC="3a.gif" align=TEXTTOP alt="EXPGUI Screen snapshot">
+<br clear=all>
+<P>
+<DL><DL>
+The pane appears slightly differently when
+<A href="expgui.html#multiplehistogram">
+"Multiple Histogram Selection" mode</A> is set to a single histogram type.
+In this case diffractometer constants are edited in separate windows (see
+<a href="#EditParm">Global Editing of Parameters</a>, below).
+<P>
+</DL></DL>
+<img SRC="3c.gif" align=TEXTTOP alt="EXPGUI Screen snapshot">
+<br clear=all>
 
+<a name="EditBackground"></a>
+<h3>A.3.1 Editing background</h3> 
+<DL><DL>
+<img SRC="3b.gif" align=LEFT alt="EXPGUI Screen snapshot">
+When the button labeled "Edit Background", (or "Globally Edit Background"
+or in the case where <A href="expgui.html#multiplehistogram">
+"Multiple Histogram Selection" mode</A> is set to a single histogram type) 
+is pressed, a window such as the one
+to the left is displayed. In the case where background coefficients 
+are being edited for more than one histogram 
+(<A href="expgui.html#multiplehistogram">
+"Multiple Histogram Selection" mode</A> must be 
+set to a single histogram type) the entry boxes will appear blank
+and only those terms that are filled in will be changed when the "Set"
+button is pressed.
+This option is mostly useful when changing the background function or the 
+number of terms for several histograms at a single time.
+Note that no changes are made until the "Set"
+button is pressed.
+<br clear=all>
+</DL></DL>
+
+<a name="EditParm"></a>
+<h3>A.3.2 Global Editing of Parameters</h3> 
+<DL><DL>
+<img SRC="3d.gif" align=LEFT alt="EXPGUI Screen snapshot">
+The dialog to the left shows how 
+a difractometer constant can be 
+edited for more than one histogram 
+(<A href="expgui.html#multiplehistogram">
+"Multiple Histogram Selection" mode</A> must be 
+set to a single histogram type).
+This menu is also used to globally set the 
+<A href="expgui4.html">Phase Fraction</A>.
+<br clear=all>
+
+</DL></DL>
+
+<a name="AddHist"></a>
+<h3>A.3.3 Entering New Diffractograms</h3> 
+<DL><DL>
+<img SRC="3e.gif" align=LEFT alt="EXPGUI Screen snapshot">
+Pressing the "Add New Histogram" button creates the dialog
+to the left. A data file and an instrument parameter file are 
+selected using the "Select File" buttons. If more than 
+one bank is defined, the bank must be selected and the maximum
+data value to be considered, must be entered. Note that the 
+units for the maximum (minimum for d-spaces) must also be selected.
+To view a data file, to see the extent of the data, the "Run RAWPLOT"
+button may be used. Note that EXPGUI cannot communicate the names
+of the data and instrument parameter files to RAWPLOT, so they must be 
+reentered.
+<P>
+<a name="AddHistErr"></a>
+If errors are detected in the input, an error message is displayed detailing where
+the errors are found. Otherwise, the EXPTOOL program is run.
+
+ and the output is displayed
+</DL></DL>
 <hr>
 <TABLE BORDER BGCOLOR="#FFFF40" ALIGN=RIGHT>