| 1 | # $Id: gsascmds.tcl 421 2009-12-04 23:05:53Z toby $ |
|---|
| 2 | #------------------------------------------------------------------------------ |
|---|
| 3 | # display routines |
|---|
| 4 | #------------------------------------------------------------------------------ |
|---|
| 5 | # Message box code that centers the message box over the parent. |
|---|
| 6 | # or along the edge, if too close, |
|---|
| 7 | # but leave a border along +x & +y for reasons I don't remember |
|---|
| 8 | # It also allows the button names to be defined using |
|---|
| 9 | # -type $list -- where $list has a list of button names |
|---|
| 10 | # larger messages are placed in a scrolled text widget |
|---|
| 11 | # capitalization is now ignored for -default |
|---|
| 12 | # The command returns the name button in all lower case letters |
|---|
| 13 | # otherwise see tk_messageBox for a description |
|---|
| 14 | # |
|---|
| 15 | # This is a modification of tkMessageBox (msgbox.tcl v1.5) |
|---|
| 16 | # |
|---|
| 17 | proc MyMessageBox {args} { |
|---|
| 18 | global tkPriv tcl_platform |
|---|
| 19 | |
|---|
| 20 | set w tkPrivMsgBox |
|---|
| 21 | upvar #0 $w data |
|---|
| 22 | |
|---|
| 23 | # |
|---|
| 24 | # The default value of the title is space (" ") not the empty string |
|---|
| 25 | # because for some window managers, a |
|---|
| 26 | # wm title .foo "" |
|---|
| 27 | # causes the window title to be "foo" instead of the empty string. |
|---|
| 28 | # |
|---|
| 29 | set specs { |
|---|
| 30 | {-default "" "" ""} |
|---|
| 31 | {-icon "" "" "info"} |
|---|
| 32 | {-message "" "" ""} |
|---|
| 33 | {-parent "" "" .} |
|---|
| 34 | {-title "" "" " "} |
|---|
| 35 | {-type "" "" "ok"} |
|---|
| 36 | {-helplink "" "" ""} |
|---|
| 37 | } |
|---|
| 38 | |
|---|
| 39 | tclParseConfigSpec $w $specs "" $args |
|---|
| 40 | |
|---|
| 41 | if {[lsearch {info warning error question} $data(-icon)] == -1} { |
|---|
| 42 | error "bad -icon value \"$data(-icon)\": must be error, info, question, or warning" |
|---|
| 43 | } |
|---|
| 44 | if {![string compare $tcl_platform(platform) "macintosh"]} { |
|---|
| 45 | switch -- $data(-icon) { |
|---|
| 46 | "error" {set data(-icon) "stop"} |
|---|
| 47 | "warning" {set data(-icon) "caution"} |
|---|
| 48 | "info" {set data(-icon) "note"} |
|---|
| 49 | } |
|---|
| 50 | } |
|---|
| 51 | |
|---|
| 52 | if {![winfo exists $data(-parent)]} { |
|---|
| 53 | error "bad window path name \"$data(-parent)\"" |
|---|
| 54 | } |
|---|
| 55 | |
|---|
| 56 | switch -- $data(-type) { |
|---|
| 57 | abortretryignore { |
|---|
| 58 | set buttons { |
|---|
| 59 | {abort -width 6 -text Abort -under 0} |
|---|
| 60 | {retry -width 6 -text Retry -under 0} |
|---|
| 61 | {ignore -width 6 -text Ignore -under 0} |
|---|
| 62 | } |
|---|
| 63 | } |
|---|
| 64 | ok { |
|---|
| 65 | set buttons { |
|---|
| 66 | {ok -width 6 -text OK -under 0} |
|---|
| 67 | } |
|---|
| 68 | if {![string compare $data(-default) ""]} { |
|---|
| 69 | set data(-default) "ok" |
|---|
| 70 | } |
|---|
| 71 | } |
|---|
| 72 | okcancel { |
|---|
| 73 | set buttons { |
|---|
| 74 | {ok -width 6 -text OK -under 0} |
|---|
| 75 | {cancel -width 6 -text Cancel -under 0} |
|---|
| 76 | } |
|---|
| 77 | } |
|---|
| 78 | retrycancel { |
|---|
| 79 | set buttons { |
|---|
| 80 | {retry -width 6 -text Retry -under 0} |
|---|
| 81 | {cancel -width 6 -text Cancel -under 0} |
|---|
| 82 | } |
|---|
| 83 | } |
|---|
| 84 | yesno { |
|---|
| 85 | set buttons { |
|---|
| 86 | {yes -width 6 -text Yes -under 0} |
|---|
| 87 | {no -width 6 -text No -under 0} |
|---|
| 88 | } |
|---|
| 89 | } |
|---|
| 90 | yesnocancel { |
|---|
| 91 | set buttons { |
|---|
| 92 | {yes -width 6 -text Yes -under 0} |
|---|
| 93 | {no -width 6 -text No -under 0} |
|---|
| 94 | {cancel -width 6 -text Cancel -under 0} |
|---|
| 95 | } |
|---|
| 96 | } |
|---|
| 97 | default { |
|---|
| 98 | # error "bad -type value \"$data(-type)\": must be abortretryignore, ok, okcancel, retrycancel, yesno, or yesnocancel" |
|---|
| 99 | foreach item $data(-type) { |
|---|
| 100 | lappend buttons [list [string tolower $item] -text $item -under 0] |
|---|
| 101 | } |
|---|
| 102 | } |
|---|
| 103 | } |
|---|
| 104 | |
|---|
| 105 | if {[string compare $data(-default) ""]} { |
|---|
| 106 | set valid 0 |
|---|
| 107 | foreach btn $buttons { |
|---|
| 108 | if {![string compare [lindex $btn 0] [string tolower $data(-default)]]} { |
|---|
| 109 | set valid 1 |
|---|
| 110 | break |
|---|
| 111 | } |
|---|
| 112 | } |
|---|
| 113 | if {!$valid} { |
|---|
| 114 | error "invalid default button \"$data(-default)\"" |
|---|
| 115 | } |
|---|
| 116 | } |
|---|
| 117 | |
|---|
| 118 | # 2. Set the dialog to be a child window of $parent |
|---|
| 119 | # |
|---|
| 120 | # |
|---|
| 121 | if {[string compare $data(-parent) .]} { |
|---|
| 122 | set w $data(-parent).__tk__messagebox |
|---|
| 123 | } else { |
|---|
| 124 | set w .__tk__messagebox |
|---|
| 125 | } |
|---|
| 126 | |
|---|
| 127 | # 3. Create the top-level window and divide it into top |
|---|
| 128 | # and bottom parts. |
|---|
| 129 | |
|---|
| 130 | catch {destroy $w} |
|---|
| 131 | toplevel $w -class Dialog |
|---|
| 132 | wm title $w $data(-title) |
|---|
| 133 | wm iconname $w Dialog |
|---|
| 134 | wm protocol $w WM_DELETE_WINDOW { } |
|---|
| 135 | wm transient $w $data(-parent) |
|---|
| 136 | if {![string compare $tcl_platform(platform) "macintosh"]} { |
|---|
| 137 | unsupported1 style $w dBoxProc |
|---|
| 138 | } |
|---|
| 139 | |
|---|
| 140 | frame $w.bot |
|---|
| 141 | pack $w.bot -side bottom -fill both |
|---|
| 142 | frame $w.top |
|---|
| 143 | pack $w.top -side top -fill both -expand 1 |
|---|
| 144 | if {$data(-helplink) != ""} { |
|---|
| 145 | # frame $w.help |
|---|
| 146 | # pack $w.help -side top -fill both |
|---|
| 147 | pack [button $w.top.1 -text Help -bg yellow \ |
|---|
| 148 | -command "MakeWWWHelp $data(-helplink)"] \ |
|---|
| 149 | -side right -anchor ne |
|---|
| 150 | bind $w <Key-F1> "MakeWWWHelp $data(-helplink)" |
|---|
| 151 | } |
|---|
| 152 | if {[string compare $tcl_platform(platform) "macintosh"]} { |
|---|
| 153 | $w.bot configure -relief raised -bd 1 |
|---|
| 154 | $w.top configure -relief raised -bd 1 |
|---|
| 155 | } |
|---|
| 156 | |
|---|
| 157 | # 4. Fill the top part with bitmap and message (use the option |
|---|
| 158 | # database for -wraplength and -font so that they can be |
|---|
| 159 | # overridden by the caller). |
|---|
| 160 | |
|---|
| 161 | option add *Dialog.msg.wrapLength 6i widgetDefault |
|---|
| 162 | |
|---|
| 163 | if {[string length $data(-message)] > 300} { |
|---|
| 164 | if {![string compare $tcl_platform(platform) "macintosh"]} { |
|---|
| 165 | option add *Dialog.msg.t.font system widgetDefault |
|---|
| 166 | } else { |
|---|
| 167 | option add *Dialog.msg.t.font {Times 18} widgetDefault |
|---|
| 168 | } |
|---|
| 169 | frame $w.msg |
|---|
| 170 | grid [text $w.msg.t \ |
|---|
| 171 | -height 20 -width 55 -relief flat -wrap word \ |
|---|
| 172 | -yscrollcommand "$w.msg.rscr set" \ |
|---|
| 173 | ] -row 1 -column 0 -sticky news |
|---|
| 174 | grid [scrollbar $w.msg.rscr -command "$w.msg.t yview" \ |
|---|
| 175 | ] -row 1 -column 1 -sticky ns |
|---|
| 176 | # give extra space to the text box |
|---|
| 177 | grid columnconfigure $w.msg 0 -weight 1 |
|---|
| 178 | grid rowconfigure $w.msg 1 -weight 1 |
|---|
| 179 | $w.msg.t insert end $data(-message) |
|---|
| 180 | } else { |
|---|
| 181 | if {![string compare $tcl_platform(platform) "macintosh"]} { |
|---|
| 182 | option add *Dialog.msg.font system widgetDefault |
|---|
| 183 | } else { |
|---|
| 184 | option add *Dialog.msg.font {Times 18} widgetDefault |
|---|
| 185 | } |
|---|
| 186 | label $w.msg -justify left -text $data(-message) |
|---|
| 187 | } |
|---|
| 188 | pack $w.msg -in $w.top -side right -expand 1 -fill both -padx 3m -pady 3m |
|---|
| 189 | if {[string compare $data(-icon) ""]} { |
|---|
| 190 | label $w.bitmap -bitmap $data(-icon) |
|---|
| 191 | pack $w.bitmap -in $w.top -side left -padx 3m -pady 3m |
|---|
| 192 | } |
|---|
| 193 | |
|---|
| 194 | # 5. Create a row of buttons at the bottom of the dialog. |
|---|
| 195 | |
|---|
| 196 | set i 0 |
|---|
| 197 | foreach but $buttons { |
|---|
| 198 | set name [lindex $but 0] |
|---|
| 199 | set opts [lrange $but 1 end] |
|---|
| 200 | if {![llength $opts]} { |
|---|
| 201 | # Capitalize the first letter of $name |
|---|
| 202 | set capName [string toupper \ |
|---|
| 203 | [string index $name 0]][string range $name 1 end] |
|---|
| 204 | set opts [list -text $capName] |
|---|
| 205 | } |
|---|
| 206 | |
|---|
| 207 | eval button [list $w.$name] $opts [list -command [list set tkPriv(button) $name]] |
|---|
| 208 | |
|---|
| 209 | if {![string compare $name [string tolower $data(-default)]]} { |
|---|
| 210 | $w.$name configure -default active |
|---|
| 211 | } |
|---|
| 212 | pack $w.$name -in $w.bot -side left -expand 1 -padx 3m -pady 2m |
|---|
| 213 | |
|---|
| 214 | # create the binding for the key accelerator, based on the underline |
|---|
| 215 | # |
|---|
| 216 | set underIdx [$w.$name cget -under] |
|---|
| 217 | if {$underIdx >= 0} { |
|---|
| 218 | set key [string index [$w.$name cget -text] $underIdx] |
|---|
| 219 | bind $w <Alt-[string tolower $key]> [list $w.$name invoke] |
|---|
| 220 | bind $w <Alt-[string toupper $key]> [list $w.$name invoke] |
|---|
| 221 | } |
|---|
| 222 | incr i |
|---|
| 223 | } |
|---|
| 224 | |
|---|
| 225 | # 6. Create a binding for <Return> on the dialog if there is a |
|---|
| 226 | # default button. |
|---|
| 227 | |
|---|
| 228 | if {[string compare $data(-default) ""]} { |
|---|
| 229 | bind $w <Return> [list tkButtonInvoke $w.[string tolower $data(-default)]] |
|---|
| 230 | } |
|---|
| 231 | |
|---|
| 232 | # 7. Withdraw the window, then update all the geometry information |
|---|
| 233 | # so we know how big it wants to be, then center the window in the |
|---|
| 234 | # display and de-iconify it. |
|---|
| 235 | |
|---|
| 236 | wm withdraw $w |
|---|
| 237 | update idletasks |
|---|
| 238 | set wp $data(-parent) |
|---|
| 239 | # center the new window in the middle of the parent |
|---|
| 240 | set x [expr [winfo x $wp] + [winfo width $wp]/2 - \ |
|---|
| 241 | [winfo reqwidth $w]/2 - [winfo vrootx $wp]] |
|---|
| 242 | set y [expr [winfo y $wp] + [winfo height $wp]/2 - \ |
|---|
| 243 | [winfo reqheight $w]/2 - [winfo vrooty $wp]] |
|---|
| 244 | # make sure that we can see the entire window |
|---|
| 245 | set xborder 10 |
|---|
| 246 | set yborder 25 |
|---|
| 247 | if {$x < 0} {set x 0} |
|---|
| 248 | if {$x+[winfo reqwidth $w] +$xborder > [winfo screenwidth $w]} { |
|---|
| 249 | incr x [expr \ |
|---|
| 250 | [winfo screenwidth $w] - ($x+[winfo reqwidth $w] + $xborder)] |
|---|
| 251 | } |
|---|
| 252 | if {$y < 0} {set y 0} |
|---|
| 253 | if {$y+[winfo reqheight $w] +$yborder > [winfo screenheight $w]} { |
|---|
| 254 | incr y [expr \ |
|---|
| 255 | [winfo screenheight $w] - ($y+[winfo reqheight $w] + $yborder)] |
|---|
| 256 | } |
|---|
| 257 | wm geom $w +$x+$y |
|---|
| 258 | wm deiconify $w |
|---|
| 259 | |
|---|
| 260 | # 8. Set a grab and claim the focus too. |
|---|
| 261 | |
|---|
| 262 | catch {set oldFocus [focus]} |
|---|
| 263 | catch {set oldGrab [grab current $w]} |
|---|
| 264 | catch { |
|---|
| 265 | grab $w |
|---|
| 266 | if {[string compare $data(-default) ""]} { |
|---|
| 267 | focus $w.[string tolower $data(-default)] |
|---|
| 268 | } else { |
|---|
| 269 | focus $w |
|---|
| 270 | } |
|---|
| 271 | } |
|---|
| 272 | |
|---|
| 273 | # 9. Wait for the user to respond, then restore the focus and |
|---|
| 274 | # return the index of the selected button. Restore the focus |
|---|
| 275 | # before deleting the window, since otherwise the window manager |
|---|
| 276 | # may take the focus away so we can't redirect it. Finally, |
|---|
| 277 | # restore any grab that was in effect. |
|---|
| 278 | |
|---|
| 279 | tkwait variable tkPriv(button) |
|---|
| 280 | catch {focus $oldFocus} |
|---|
| 281 | destroy $w |
|---|
| 282 | catch {grab $oldGrab} |
|---|
| 283 | return $tkPriv(button) |
|---|
| 284 | } |
|---|
| 285 | |
|---|
| 286 | # tell'em what is happening |
|---|
| 287 | proc pleasewait {{message {}}} { |
|---|
| 288 | catch {destroy .msg} |
|---|
| 289 | toplevel .msg |
|---|
| 290 | wm transient .msg [winfo toplevel .] |
|---|
| 291 | pack [frame .msg.f -bd 4 -relief groove] |
|---|
| 292 | pack [message .msg.f.m -text "Please wait $message"] |
|---|
| 293 | wm withdraw .msg |
|---|
| 294 | update idletasks |
|---|
| 295 | # place the message on top of the main window |
|---|
| 296 | set x [expr [winfo x .] + [winfo width .]/2 - \ |
|---|
| 297 | [winfo reqwidth .msg]/2 - [winfo vrootx .]] |
|---|
| 298 | if {$x < 0} {set x 0} |
|---|
| 299 | set y [expr [winfo y .] + [winfo height .]/2 - \ |
|---|
| 300 | [winfo reqheight .msg]/2 - [winfo vrooty .]] |
|---|
| 301 | if {$y < 0} {set y 0} |
|---|
| 302 | wm geom .msg +$x+$y |
|---|
| 303 | wm deiconify .msg |
|---|
| 304 | global makenew |
|---|
| 305 | set makenew(OldGrab) "" |
|---|
| 306 | set makenew(OldFocus) "" |
|---|
| 307 | # save focus & grab |
|---|
| 308 | catch {set makenew(OldFocus) [focus]} |
|---|
| 309 | catch {set makenew(OldGrab) [grab current .msg]} |
|---|
| 310 | catch {grab .msg} |
|---|
| 311 | update |
|---|
| 312 | } |
|---|
| 313 | |
|---|
| 314 | # clear the message |
|---|
| 315 | proc donewait {} { |
|---|
| 316 | global makenew |
|---|
| 317 | catch {destroy .msg} |
|---|
| 318 | # reset focus & grab |
|---|
| 319 | catch { |
|---|
| 320 | if {$makenew(OldFocus) != ""} { |
|---|
| 321 | focus $makenew(OldFocus) |
|---|
| 322 | } |
|---|
| 323 | } |
|---|
| 324 | catch { |
|---|
| 325 | if {$makenew(OldGrab) != ""} { |
|---|
| 326 | grab $makenew(OldGrab) |
|---|
| 327 | } |
|---|
| 328 | } |
|---|
| 329 | } |
|---|
| 330 | |
|---|
| 331 | proc putontop {w} { |
|---|
| 332 | # center window $w above its parent and make it stay on top |
|---|
| 333 | set wp [winfo parent $w] |
|---|
| 334 | wm transient $w [winfo toplevel $wp] |
|---|
| 335 | wm withdraw $w |
|---|
| 336 | update idletasks |
|---|
| 337 | # center the new window in the middle of the parent |
|---|
| 338 | set x [expr [winfo x $wp] + [winfo width $wp]/2 - \ |
|---|
| 339 | [winfo reqwidth $w]/2 - [winfo vrootx $wp]] |
|---|
| 340 | if {$x < 0} {set x 0} |
|---|
| 341 | set xborder 10 |
|---|
| 342 | if {$x+[winfo reqwidth $w] +$xborder > [winfo screenwidth $w]} { |
|---|
| 343 | incr x [expr \ |
|---|
| 344 | [winfo screenwidth $w] - ($x+[winfo reqwidth $w] + $xborder)] |
|---|
| 345 | } |
|---|
| 346 | set y [expr [winfo y $wp] + [winfo height $wp]/2 - \ |
|---|
| 347 | [winfo reqheight $w]/2 - [winfo vrooty $wp]] |
|---|
| 348 | if {$y < 0} {set y 0} |
|---|
| 349 | set yborder 25 |
|---|
| 350 | if {$y+[winfo reqheight $w] +$yborder > [winfo screenheight $w]} { |
|---|
| 351 | incr y [expr \ |
|---|
| 352 | [winfo screenheight $w] - ($y+[winfo reqheight $w] + $yborder)] |
|---|
| 353 | } |
|---|
| 354 | wm geom $w +$x+$y |
|---|
| 355 | wm deiconify $w |
|---|
| 356 | |
|---|
| 357 | global makenew |
|---|
| 358 | set makenew(OldGrab) "" |
|---|
| 359 | set makenew(OldFocus) "" |
|---|
| 360 | catch {set makenew(OldFocus) [focus]} |
|---|
| 361 | catch {set makenew(OldGrab) [grab current $w]} |
|---|
| 362 | catch {grab $w} |
|---|
| 363 | } |
|---|
| 364 | |
|---|
| 365 | proc afterputontop {} { |
|---|
| 366 | # restore focus |
|---|
| 367 | global makenew |
|---|
| 368 | # reset focus & grab |
|---|
| 369 | catch { |
|---|
| 370 | if {$makenew(OldFocus) != ""} { |
|---|
| 371 | focus $makenew(OldFocus) |
|---|
| 372 | } |
|---|
| 373 | } |
|---|
| 374 | catch { |
|---|
| 375 | if {$makenew(OldGrab) != ""} { |
|---|
| 376 | grab $makenew(OldGrab) |
|---|
| 377 | } |
|---|
| 378 | } |
|---|
| 379 | } |
|---|
| 380 | |
|---|
| 381 | proc ShowBigMessage {win labeltext msg "optionlist OK" "link {}"} { |
|---|
| 382 | catch {destroy $win} |
|---|
| 383 | toplevel $win |
|---|
| 384 | |
|---|
| 385 | pack [label $win.l1 -text $labeltext] -side top |
|---|
| 386 | pack [frame $win.f1] -side top -expand yes -fill both |
|---|
| 387 | grid [text $win.f1.t \ |
|---|
| 388 | -height 20 -width 55 -wrap none -font Courier \ |
|---|
| 389 | -xscrollcommand "$win.f1.bscr set" \ |
|---|
| 390 | -yscrollcommand "$win.f1.rscr set" \ |
|---|
| 391 | ] -row 1 -column 0 -sticky news |
|---|
| 392 | grid [scrollbar $win.f1.bscr -orient horizontal \ |
|---|
| 393 | -command "$win.f1.t xview" \ |
|---|
| 394 | ] -row 2 -column 0 -sticky ew |
|---|
| 395 | grid [scrollbar $win.f1.rscr -command "$win.f1.t yview" \ |
|---|
| 396 | ] -row 1 -column 1 -sticky ns |
|---|
| 397 | # give extra space to the text box |
|---|
| 398 | grid columnconfigure $win.f1 0 -weight 1 |
|---|
| 399 | grid rowconfigure $win.f1 1 -weight 1 |
|---|
| 400 | $win.f1.t insert end $msg |
|---|
| 401 | |
|---|
| 402 | global makenew |
|---|
| 403 | set makenew(result) 0 |
|---|
| 404 | bind $win <Return> "destroy $win" |
|---|
| 405 | bind $win <KeyPress-Prior> "$win.f1.t yview scroll -1 page" |
|---|
| 406 | bind $win <KeyPress-Next> "$win.f1.t yview scroll 1 page" |
|---|
| 407 | bind $win <KeyPress-Right> "$win.f1.t xview scroll 1 unit" |
|---|
| 408 | bind $win <KeyPress-Left> "$win.f1.t xview scroll -1 unit" |
|---|
| 409 | bind $win <KeyPress-Up> "$win.f1.t yview scroll -1 unit" |
|---|
| 410 | bind $win <KeyPress-Down> "$win.f1.t yview scroll 1 unit" |
|---|
| 411 | bind $win <KeyPress-Home> "$win.f1.t yview 0" |
|---|
| 412 | bind $win <KeyPress-End> "$win.f1.t yview end" |
|---|
| 413 | set i 0 |
|---|
| 414 | foreach item $optionlist { |
|---|
| 415 | pack [button $win.q[incr i] \ |
|---|
| 416 | -command "set makenew(result) $i; destroy $win" -text $item] -side left |
|---|
| 417 | } |
|---|
| 418 | if {$link != ""} { |
|---|
| 419 | pack [button $win.help -text Help -bg yellow \ |
|---|
| 420 | -command "MakeWWWHelp $link"] \ |
|---|
| 421 | -side right |
|---|
| 422 | bind $win <Key-F1> "MakeWWWHelp $link" |
|---|
| 423 | } |
|---|
| 424 | putontop $win |
|---|
| 425 | tkwait window $win |
|---|
| 426 | |
|---|
| 427 | # fix grab... |
|---|
| 428 | afterputontop |
|---|
| 429 | return $makenew(result) |
|---|
| 430 | } |
|---|
| 431 | |
|---|
| 432 | # get a value in a modal dialog |
|---|
| 433 | proc getstring {what "chars 40" "quit 1" "initvalue {}"} { |
|---|
| 434 | global expgui expmap |
|---|
| 435 | set w .global |
|---|
| 436 | catch {destroy $w} |
|---|
| 437 | toplevel $w -bg beige |
|---|
| 438 | bind $w <Key-F1> "MakeWWWHelp expguierr.html Input[lindex $what 0]" |
|---|
| 439 | wm title $w "Input $what" |
|---|
| 440 | set expgui(temp) {} |
|---|
| 441 | pack [frame $w.0 -bd 6 -relief groove -bg beige] \ |
|---|
| 442 | -side top -expand yes -fill both |
|---|
| 443 | grid [label $w.0.a -text "Input a value for the $what" \ |
|---|
| 444 | -bg beige] \ |
|---|
| 445 | -row 0 -column 0 -columnspan 10 |
|---|
| 446 | grid [entry $w.0.b -textvariable expgui(temp) -width $chars] \ |
|---|
| 447 | -row 1 -column 0 |
|---|
| 448 | |
|---|
| 449 | set expgui(temp) $initvalue |
|---|
| 450 | pack [frame $w.b -bg beige] -side top -fill x -expand yes |
|---|
| 451 | pack [button $w.b.2 -text Set -command "destroy $w"] -side left |
|---|
| 452 | if $quit { |
|---|
| 453 | pack [button $w.b.3 -text Quit \ |
|---|
| 454 | -command "set expgui(temp) {}; destroy $w"] -side left |
|---|
| 455 | } |
|---|
| 456 | bind $w <Return> "destroy $w" |
|---|
| 457 | pack [button $w.b.help -text Help -bg yellow \ |
|---|
| 458 | -command "MakeWWWHelp expguierr.html Input[lindex $what 0]"] \ |
|---|
| 459 | -side right |
|---|
| 460 | |
|---|
| 461 | # force the window to stay on top |
|---|
| 462 | putontop $w |
|---|
| 463 | |
|---|
| 464 | focus $w.b.2 |
|---|
| 465 | tkwait window $w |
|---|
| 466 | afterputontop |
|---|
| 467 | |
|---|
| 468 | return $expgui(temp) |
|---|
| 469 | } |
|---|
| 470 | |
|---|
| 471 | #------------------------------------------------------------------------------ |
|---|
| 472 | # profile/symmetry routines |
|---|
| 473 | #------------------------------------------------------------------------------ |
|---|
| 474 | # profile terms |
|---|
| 475 | array set expgui { |
|---|
| 476 | prof-T-1 {alp-0 alp-1 bet-0 bet-1 sig-0 sig-1 sig-2 rstr rsta \ |
|---|
| 477 | rsca s1ec s2ec } |
|---|
| 478 | prof-T-2 {alp-0 alp-1 beta switch sig-0 sig-1 sig-2 gam-0 gam-1 \ |
|---|
| 479 | gam-2 ptec stec difc difa zero } |
|---|
| 480 | prof-T-3 {alp bet-0 bet-1 sig-0 sig-1 sig-2 gam-0 gam-1 \ |
|---|
| 481 | gam-2 gsf g1ec g2ec rstr rsta rsca L11 L22 L33 L12 L13 L23 } |
|---|
| 482 | prof-T-4 {alp bet-0 bet-1 sig-1 sig-2 gam-2 g2ec gsf \ |
|---|
| 483 | rstr rsta rsca eta} |
|---|
| 484 | prof-C-1 {GU GV GW asym F1 F2 } |
|---|
| 485 | prof-C-2 {GU GV GW LX LY trns asym shft GP stec ptec sfec \ |
|---|
| 486 | L11 L22 L33 L12 L13 L23 } |
|---|
| 487 | prof-C-3 {GU GV GW GP LX LY S/L H/L trns shft stec ptec sfec \ |
|---|
| 488 | L11 L22 L33 L12 L13 L23 } |
|---|
| 489 | prof-C-4 {GU GV GW GP LX ptec trns shft sfec S/L H/L eta} |
|---|
| 490 | prof-E-1 {A B C ds cds} |
|---|
| 491 | } |
|---|
| 492 | |
|---|
| 493 | # number of profile terms depends on the histogram type |
|---|
| 494 | # the LAUE symmetry and the profile number |
|---|
| 495 | proc GetProfileTerms {phase hist ptype} { |
|---|
| 496 | global expmap expgui |
|---|
| 497 | if {$hist == "C" || $hist == "T" || $hist == "E"} { |
|---|
| 498 | set htype $hist |
|---|
| 499 | } else { |
|---|
| 500 | set htype [string range $expmap(htype_$hist) 2 2] |
|---|
| 501 | } |
|---|
| 502 | # get the cached copy of the profile term labels, when possible |
|---|
| 503 | set lbls {} |
|---|
| 504 | catch { |
|---|
| 505 | set lbls $expmap(ProfileTerms${phase}_${ptype}_${htype}) |
|---|
| 506 | } |
|---|
| 507 | if {$lbls != ""} {return $lbls} |
|---|
| 508 | |
|---|
| 509 | catch {set lbls $expgui(prof-$htype-$ptype)} |
|---|
| 510 | if {$lbls == ""} {return} |
|---|
| 511 | # add terms based on the Laue symmetry |
|---|
| 512 | if {($htype == "C" || $htype == "T") && $ptype == 4} { |
|---|
| 513 | set laueaxis [GetLaue [phaseinfo $phase spacegroup]] |
|---|
| 514 | eval lappend lbls [Profile4Terms $laueaxis] |
|---|
| 515 | } |
|---|
| 516 | set expmap(ProfileTerms${phase}_${ptype}_${htype}) $lbls |
|---|
| 517 | return $lbls |
|---|
| 518 | } |
|---|
| 519 | |
|---|
| 520 | proc Profile4Terms {laueaxis} { |
|---|
| 521 | switch -exact $laueaxis { |
|---|
| 522 | 1bar {return \ |
|---|
| 523 | "S400 S040 S004 S220 S202 S022 S310 S103 S031 \ |
|---|
| 524 | S130 S301 S013 S211 S121 S112"} |
|---|
| 525 | 2/ma {return "S400 S040 S004 S220 S202 S022 S013 S031 S211"} |
|---|
| 526 | 2/mb {return "S400 S040 S004 S220 S202 S022 S301 S103 S121"} |
|---|
| 527 | 2/mc {return "S400 S040 S004 S220 S202 S022 S130 S310 S112"} |
|---|
| 528 | mmm {return "S400 S040 S004 S220 S202 S022"} |
|---|
| 529 | 4/m {return "S400 S004 S220 S202"} |
|---|
| 530 | 4/mmm {return "S400 S004 S220 S202"} |
|---|
| 531 | 3barR {return "S400 S220 S310 S211"} |
|---|
| 532 | "3bar mR" {return "S400 S220 S310 S211"} |
|---|
| 533 | 3bar {return "S400 S004 S202 S211"} |
|---|
| 534 | 3barm1 {return "S400 S004 S202"} |
|---|
| 535 | 3bar1m {return "S400 S004 S202 S211"} |
|---|
| 536 | 6/m {return "S400 S004 S202"} |
|---|
| 537 | 6/mmm {return "S400 S004 S202"} |
|---|
| 538 | "m 3" {return "S400 S220"} |
|---|
| 539 | m3m {return "S400 S220"} |
|---|
| 540 | default {return ""} |
|---|
| 541 | } |
|---|
| 542 | } |
|---|
| 543 | |
|---|
| 544 | proc GetLaue {spg} { |
|---|
| 545 | global tcl_platform expgui |
|---|
| 546 | # check the space group |
|---|
| 547 | set fp [open spg.in w] |
|---|
| 548 | puts $fp "N" |
|---|
| 549 | puts $fp "N" |
|---|
| 550 | puts $fp $spg |
|---|
| 551 | puts $fp "Q" |
|---|
| 552 | close $fp |
|---|
| 553 | catch { |
|---|
| 554 | if {$tcl_platform(platform) == "windows"} { |
|---|
| 555 | exec [file join $expgui(gsasexe) spcgroup.exe] < spg.in >& spg.out |
|---|
| 556 | } else { |
|---|
| 557 | exec [file join $expgui(gsasexe) spcgroup] < spg.in >& spg.out |
|---|
| 558 | } |
|---|
| 559 | } |
|---|
| 560 | set fp [open spg.out r] |
|---|
| 561 | set laue {} |
|---|
| 562 | set uniqueaxis {} |
|---|
| 563 | while {[gets $fp line] >= 0} { |
|---|
| 564 | regexp {Laue symmetry (.*)} $line junk laue |
|---|
| 565 | regexp {The unique axis is (.*)} $line junk uniqueaxis |
|---|
| 566 | } |
|---|
| 567 | close $fp |
|---|
| 568 | catch {file delete -force spg.in spg.out} |
|---|
| 569 | set laue [string trim $laue] |
|---|
| 570 | # add a R suffix for rhombohedral settings |
|---|
| 571 | if {[string range [string trim $spg] end end] == "R"} { |
|---|
| 572 | return "${laue}${uniqueaxis}R" |
|---|
| 573 | } |
|---|
| 574 | return "${laue}$uniqueaxis" |
|---|
| 575 | } |
|---|
| 576 | |
|---|
| 577 | # set up to change the profile type for a series of histogram/phase entries |
|---|
| 578 | # (histlist & phaselist should be lists of the same length) |
|---|
| 579 | # |
|---|
| 580 | proc ChangeProfileType {histlist phaselist} { |
|---|
| 581 | global expgui expmap |
|---|
| 582 | set w .profile |
|---|
| 583 | catch {destroy $w} |
|---|
| 584 | toplevel $w -bg beige |
|---|
| 585 | wm title $w "Change Profile Function" |
|---|
| 586 | |
|---|
| 587 | # all histogram/phases better be the same type, so we can just use the 1st |
|---|
| 588 | set hist [lindex $histlist 0] |
|---|
| 589 | set phase [lindex $phaselist 0] |
|---|
| 590 | set ptype [string trim [hapinfo $hist $phase proftype]] |
|---|
| 591 | |
|---|
| 592 | # get list of allowed profile terms for the current histogram type |
|---|
| 593 | set i 1 |
|---|
| 594 | while {[set lbls [GetProfileTerms $phase $hist $i]] != ""} { |
|---|
| 595 | lappend lbllist $lbls |
|---|
| 596 | incr i |
|---|
| 597 | } |
|---|
| 598 | # labels for the current type |
|---|
| 599 | set i $ptype |
|---|
| 600 | set oldlbls [lindex $lbllist [incr i -1]] |
|---|
| 601 | |
|---|
| 602 | if {[llength $histlist] == 1} { |
|---|
| 603 | pack [label $w.a -bg beige \ |
|---|
| 604 | -text "Change profile function for Histogram #$hist Phase #$phase" \ |
|---|
| 605 | ] -side top |
|---|
| 606 | } else { |
|---|
| 607 | # make a list of histograms by phase |
|---|
| 608 | foreach h $histlist p $phaselist { |
|---|
| 609 | lappend phlist($p) $h |
|---|
| 610 | } |
|---|
| 611 | set num 0 |
|---|
| 612 | pack [frame $w.a -bg beige] -side top |
|---|
| 613 | pack [label $w.a.$num -bg beige \ |
|---|
| 614 | -text "Change profile function for:" \ |
|---|
| 615 | ] -side top -anchor w |
|---|
| 616 | foreach i [lsort [array names phlist]] { |
|---|
| 617 | incr num |
|---|
| 618 | pack [label $w.a.$num -bg beige -text \ |
|---|
| 619 | "\tPhase #$i, Histograms [CompressList $phlist($i)]" \ |
|---|
| 620 | ] -side top -anchor w |
|---|
| 621 | } |
|---|
| 622 | } |
|---|
| 623 | pack [label $w.e1 \ |
|---|
| 624 | -text "Current function is type $ptype." \ |
|---|
| 625 | -bg beige] -side top -anchor w |
|---|
| 626 | pack [frame $w.e -bg beige] -side top -expand yes -fill both |
|---|
| 627 | pack [label $w.e.1 \ |
|---|
| 628 | -text "Set function to type" \ |
|---|
| 629 | -bg beige] -side left |
|---|
| 630 | set menu [tk_optionMenu $w.e.2 expgui(newpeaktype) junk] |
|---|
| 631 | pack $w.e.2 -side left -anchor w |
|---|
| 632 | |
|---|
| 633 | pack [radiobutton $w.e.4 -bg beige -variable expgui(DefaultPeakType) \ |
|---|
| 634 | -command "set expgui(newpeaktype) $ptype; \ |
|---|
| 635 | FillChangeProfileType $w.c $hist $phase $ptype [list $oldlbls] [list $oldlbls]" \ |
|---|
| 636 | -value 1 -text "Current value overrides"] -side right |
|---|
| 637 | pack [radiobutton $w.e.3 -bg beige -variable expgui(DefaultPeakType) \ |
|---|
| 638 | -command \ |
|---|
| 639 | "set expgui(newpeaktype) $ptype; \ |
|---|
| 640 | FillChangeProfileType $w.c $hist $phase $ptype [list $oldlbls] [list $oldlbls]" \ |
|---|
| 641 | -value 0 -text "Default value overrides"] -side right |
|---|
| 642 | |
|---|
| 643 | $w.e.2 config -bg beige |
|---|
| 644 | pack [frame $w.c -bg beige] -side top -expand yes -fill both |
|---|
| 645 | pack [frame $w.d -bg beige] -side top -expand yes -fill both |
|---|
| 646 | pack [button $w.d.2 -text Set \ |
|---|
| 647 | -command "SaveChangeProfileType $w.c $histlist $phaselist; destroy $w"\ |
|---|
| 648 | ] -side left |
|---|
| 649 | pack [button $w.d.3 -text Quit \ |
|---|
| 650 | -command "destroy $w"] -side left |
|---|
| 651 | pack [button $w.d.help -text Help -bg yellow \ |
|---|
| 652 | -command "MakeWWWHelp expgui5.html ChangeType"] \ |
|---|
| 653 | -side right |
|---|
| 654 | bind $w <Key-F1> "MakeWWWHelp expgui5.html ChangeType" |
|---|
| 655 | bind $w <Return> "destroy $w" |
|---|
| 656 | |
|---|
| 657 | $menu delete 0 end |
|---|
| 658 | set i 0 |
|---|
| 659 | foreach lbls $lbllist { |
|---|
| 660 | incr i |
|---|
| 661 | $menu add command -label $i -command \ |
|---|
| 662 | "set expgui(newpeaktype) $i; \ |
|---|
| 663 | FillChangeProfileType $w.c $hist $phase $i [list $lbls] [list $oldlbls]" |
|---|
| 664 | } |
|---|
| 665 | set expgui(newpeaktype) $ptype |
|---|
| 666 | FillChangeProfileType $w.c $hist $phase $ptype $oldlbls $oldlbls |
|---|
| 667 | |
|---|
| 668 | # force the window to stay on top |
|---|
| 669 | putontop $w |
|---|
| 670 | focus $w.e.2 |
|---|
| 671 | tkwait window $w |
|---|
| 672 | afterputontop |
|---|
| 673 | sethistlist |
|---|
| 674 | } |
|---|
| 675 | |
|---|
| 676 | # save the changes to the profile |
|---|
| 677 | proc SaveChangeProfileType {w histlist phaselist} { |
|---|
| 678 | global expgui |
|---|
| 679 | foreach phase $phaselist hist $histlist { |
|---|
| 680 | hapinfo $hist $phase proftype set $expgui(newpeaktype) |
|---|
| 681 | hapinfo $hist $phase profterms set $expgui(newProfileTerms) |
|---|
| 682 | for {set i 1} {$i <= $expgui(newProfileTerms)} {incr i} { |
|---|
| 683 | hapinfo $hist $phase pterm$i set [$w.ent${i} get] |
|---|
| 684 | hapinfo $hist $phase pref$i set $expgui(ProfRef$i) |
|---|
| 685 | } |
|---|
| 686 | set i [expr 1+$expgui(newProfileTerms)] |
|---|
| 687 | hapinfo $hist $phase pcut set [$w.ent$i get] |
|---|
| 688 | incr expgui(changed) [expr 3 + $expgui(newProfileTerms)] |
|---|
| 689 | } |
|---|
| 690 | } |
|---|
| 691 | |
|---|
| 692 | # file the contents of the "Change Profile Type" Menu |
|---|
| 693 | proc FillChangeProfileType {w hist phase newtype lbls oldlbls} { |
|---|
| 694 | global expgui expmap |
|---|
| 695 | set ptype [string trim [hapinfo $hist $phase proftype]] |
|---|
| 696 | catch {unset oldval} |
|---|
| 697 | # loop through the old terms and set up an array of starting values |
|---|
| 698 | set num 0 |
|---|
| 699 | foreach term $oldlbls { |
|---|
| 700 | incr num |
|---|
| 701 | set oldval($term) [hapinfo $hist $phase pterm$num] |
|---|
| 702 | } |
|---|
| 703 | set oldval(Peak\nCutoff) [hapinfo $hist $phase pcut] |
|---|
| 704 | |
|---|
| 705 | # is the new type the same as the current? |
|---|
| 706 | if {$ptype == $newtype} { |
|---|
| 707 | set nterms [hapinfo $hist $phase profterms] |
|---|
| 708 | } else { |
|---|
| 709 | set nterms [llength $lbls] |
|---|
| 710 | } |
|---|
| 711 | set expgui(newProfileTerms) $nterms |
|---|
| 712 | set expgui(CurrentProfileTerms) $nterms |
|---|
| 713 | # which default profile set matches the new type |
|---|
| 714 | set setnum {} |
|---|
| 715 | foreach j {" " 1 2 3 4 5 6 7 8 9} { |
|---|
| 716 | set i [profdefinfo $hist $j proftype] |
|---|
| 717 | if {$i == ""} continue |
|---|
| 718 | if {$i == $newtype} { |
|---|
| 719 | set setnum $j |
|---|
| 720 | break |
|---|
| 721 | } |
|---|
| 722 | } |
|---|
| 723 | |
|---|
| 724 | eval destroy [winfo children $w] |
|---|
| 725 | |
|---|
| 726 | set colstr 0 |
|---|
| 727 | set row 2 |
|---|
| 728 | set maxrow [expr $row + $nterms/2] |
|---|
| 729 | for { set num 1 } { $num <= $nterms + 1} { incr num } { |
|---|
| 730 | # get the default value (originally from the in .INS file) |
|---|
| 731 | set val {} |
|---|
| 732 | if {$setnum != ""} { |
|---|
| 733 | set val 0.0 |
|---|
| 734 | catch { |
|---|
| 735 | set val [profdefinfo $hist $setnum pterm$num] |
|---|
| 736 | # pretty up the number |
|---|
| 737 | if {$val == 0.0} { |
|---|
| 738 | set val 0.0 |
|---|
| 739 | } elseif {abs($val) < 1e-2 || abs($val) > 1e6} { |
|---|
| 740 | set val [format %.3e $val] |
|---|
| 741 | } elseif {abs($val) > 1e-2 && abs($val) < 10} { |
|---|
| 742 | set val [format %.5f $val] |
|---|
| 743 | } elseif {abs($val) < 9999} { |
|---|
| 744 | set val [format %.2f $val] |
|---|
| 745 | } elseif {abs($val) < 1e6} { |
|---|
| 746 | set val [format %.0f $val] |
|---|
| 747 | } |
|---|
| 748 | } |
|---|
| 749 | } |
|---|
| 750 | # heading |
|---|
| 751 | if {$row == 2} { |
|---|
| 752 | set col $colstr |
|---|
| 753 | grid [label $w.h0${num} -text "lbl" -bg beige] \ |
|---|
| 754 | -row $row -column $col |
|---|
| 755 | grid [label $w.h2${num} -text "ref" -bg beige] \ |
|---|
| 756 | -row $row -column [incr col] |
|---|
| 757 | grid [label $w.h3${num} -text "next value" -bg beige] \ |
|---|
| 758 | -row $row -column [incr col] |
|---|
| 759 | grid [label $w.h4${num} -text "default" -bg beige] \ |
|---|
| 760 | -row $row -column [incr col] |
|---|
| 761 | grid [label $w.h5${num} -text "current" -bg beige] \ |
|---|
| 762 | -row $row -column [incr col] |
|---|
| 763 | } |
|---|
| 764 | set col $colstr |
|---|
| 765 | incr row |
|---|
| 766 | set term {} |
|---|
| 767 | catch {set term [lindex $lbls [expr $num-1]]} |
|---|
| 768 | if {$term == ""} {set term $num} |
|---|
| 769 | if {$num == $nterms + 1} { |
|---|
| 770 | set term "Peak\nCutoff" |
|---|
| 771 | set val {} |
|---|
| 772 | if {$setnum != ""} { |
|---|
| 773 | set val 0.0 |
|---|
| 774 | catch {set val [profdefinfo $hist $setnum pcut]} |
|---|
| 775 | } |
|---|
| 776 | } |
|---|
| 777 | |
|---|
| 778 | grid [label $w.l${num} -text "$term" -bg beige] \ |
|---|
| 779 | -row $row -column $col |
|---|
| 780 | grid [checkbutton $w.chk${num} -variable expgui(ProfRef$num) \ |
|---|
| 781 | -bg beige -activebackground beige] -row $row -column [incr col] |
|---|
| 782 | grid [entry $w.ent${num} \ |
|---|
| 783 | -width 12] -row $row -column [incr col] |
|---|
| 784 | if {$val != ""} { |
|---|
| 785 | grid [button $w.def${num} -text $val -command \ |
|---|
| 786 | "$w.ent${num} delete 0 end; $w.ent${num} insert end $val" \ |
|---|
| 787 | ] -row $row -column [incr col] -sticky ew |
|---|
| 788 | } else { |
|---|
| 789 | grid [label $w.def${num} -text (none) \ |
|---|
| 790 | ] -row $row -column [incr col] |
|---|
| 791 | } |
|---|
| 792 | set curval {} |
|---|
| 793 | catch { |
|---|
| 794 | set curval [expr $oldval($term)] |
|---|
| 795 | # pretty up the number |
|---|
| 796 | if {$curval == 0.0} { |
|---|
| 797 | set curval 0.0 |
|---|
| 798 | } elseif {abs($curval) < 1e-2 || abs($curval) > 1e6} { |
|---|
| 799 | set curval [format %.3e $curval] |
|---|
| 800 | } elseif {abs($curval) > 1e-2 && abs($curval) < 10} { |
|---|
| 801 | set curval [format %.5f $curval] |
|---|
| 802 | } elseif {abs($curval) < 9999} { |
|---|
| 803 | set curval [format %.2f $curval] |
|---|
| 804 | } elseif {abs($curval) < 1e6} { |
|---|
| 805 | set curval [format %.0f $curval] |
|---|
| 806 | } |
|---|
| 807 | grid [button $w.cur${num} -text $curval -command \ |
|---|
| 808 | "$w.ent${num} delete 0 end; $w.ent${num} insert end $curval" \ |
|---|
| 809 | ] -row $row -column [incr col] -sticky ew |
|---|
| 810 | } |
|---|
| 811 | # set default values for flag and value |
|---|
| 812 | set ref 0 |
|---|
| 813 | if {$setnum != ""} { |
|---|
| 814 | catch { |
|---|
| 815 | if {[profdefinfo $hist $setnum pref$num] == "Y"} {set ref 1} |
|---|
| 816 | } |
|---|
| 817 | } |
|---|
| 818 | set expgui(ProfRef$num) $ref |
|---|
| 819 | |
|---|
| 820 | $w.ent${num} delete 0 end |
|---|
| 821 | if {!$expgui(DefaultPeakType) && $val != ""} { |
|---|
| 822 | $w.ent${num} insert end $val |
|---|
| 823 | } elseif {$curval != ""} { |
|---|
| 824 | $w.ent${num} insert end $curval |
|---|
| 825 | } elseif {$val != ""} { |
|---|
| 826 | $w.ent${num} insert end $val |
|---|
| 827 | } else { |
|---|
| 828 | $w.ent${num} insert end 0.0 |
|---|
| 829 | } |
|---|
| 830 | if {$row > $maxrow} { |
|---|
| 831 | set row 2 |
|---|
| 832 | incr colstr 5 |
|---|
| 833 | } |
|---|
| 834 | } |
|---|
| 835 | } |
|---|
| 836 | |
|---|
| 837 | #------------------------------------------------------------------------------ |
|---|
| 838 | # WWW/help routines |
|---|
| 839 | #------------------------------------------------------------------------------ |
|---|
| 840 | # browse a WWW page with URL. The URL may contain a #anchor |
|---|
| 841 | # On UNIX assume netscape is in the path or env(BROWSER) is loaded. |
|---|
| 842 | # On Windows search the registry for a browser. Mac branch not tested. |
|---|
| 843 | # This is taken from http://mini.net/cgi-bin/wikit/557.html with many thanks |
|---|
| 844 | # to the contributers |
|---|
| 845 | proc urlOpen {url} { |
|---|
| 846 | global env tcl_platform |
|---|
| 847 | switch $tcl_platform(platform) { |
|---|
| 848 | "unix" { |
|---|
| 849 | if {![info exists env(BROWSER)]} { |
|---|
| 850 | set progs [auto_execok netscape] |
|---|
| 851 | if {[llength $progs]} { |
|---|
| 852 | set env(BROWSER) [list $progs] |
|---|
| 853 | } |
|---|
| 854 | } |
|---|
| 855 | if {[info exists env(BROWSER)]} { |
|---|
| 856 | if {[catch {exec $env(BROWSER) -remote openURL($url)}]} { |
|---|
| 857 | # perhaps browser doesn't understand -remote flag |
|---|
| 858 | if {[catch {exec $env(BROWSER) $url &} emsg]} { |
|---|
| 859 | error "Error displaying $url in browser\n$emsg" |
|---|
| 860 | } |
|---|
| 861 | } |
|---|
| 862 | } else { |
|---|
| 863 | MyMessageBox -parent . -title "No Browser" \ |
|---|
| 864 | -message "Could not find a browser. Netscape is not in path. Define environment variable BROWSER to be full path name of browser." \ |
|---|
| 865 | -icon warn |
|---|
| 866 | } |
|---|
| 867 | } |
|---|
| 868 | "windows" { |
|---|
| 869 | package require registry |
|---|
| 870 | # Look for the application under |
|---|
| 871 | # HKEY_CLASSES_ROOT |
|---|
| 872 | set root HKEY_CLASSES_ROOT |
|---|
| 873 | |
|---|
| 874 | # Get the application key for HTML files |
|---|
| 875 | set appKey [registry get $root\\.html ""] |
|---|
| 876 | |
|---|
| 877 | # Get the command for opening HTML files |
|---|
| 878 | set appCmd [registry get \ |
|---|
| 879 | $root\\$appKey\\shell\\open\\command ""] |
|---|
| 880 | |
|---|
| 881 | # Substitute the HTML filename into the command for %1 |
|---|
| 882 | regsub %1 $appCmd $url appCmd |
|---|
| 883 | |
|---|
| 884 | # Double up the backslashes for eval (below) |
|---|
| 885 | regsub -all {\\} $appCmd {\\\\} appCmd |
|---|
| 886 | |
|---|
| 887 | # Invoke the command |
|---|
| 888 | eval exec $appCmd & |
|---|
| 889 | } |
|---|
| 890 | "macintosh" { |
|---|
| 891 | if {0 == [info exists env(BROWSER)]} { |
|---|
| 892 | set env(BROWSER) "Browse the Internet" |
|---|
| 893 | } |
|---|
| 894 | if {[catch { |
|---|
| 895 | AppleScript execute\ |
|---|
| 896 | "tell application \"$env(BROWSER)\" |
|---|
| 897 | open url \"$url\" |
|---|
| 898 | end tell |
|---|
| 899 | "} emsg] |
|---|
| 900 | } then { |
|---|
| 901 | error "Error displaying $url in browser\n$emsg" |
|---|
| 902 | } |
|---|
| 903 | } |
|---|
| 904 | } |
|---|
| 905 | } |
|---|
| 906 | |
|---|
| 907 | proc NetHelp {file anchor localloc netloc} { |
|---|
| 908 | if {[file exists [file join $localloc $file]]} { |
|---|
| 909 | set url "[file join $localloc $file]" |
|---|
| 910 | } else { |
|---|
| 911 | set url "http://$netloc/$file" |
|---|
| 912 | } |
|---|
| 913 | catch { |
|---|
| 914 | pleasewait "Starting web browser..." |
|---|
| 915 | after 2000 donewait |
|---|
| 916 | } |
|---|
| 917 | if {$anchor != ""} { |
|---|
| 918 | append url # $anchor |
|---|
| 919 | } |
|---|
| 920 | urlOpen $url |
|---|
| 921 | } |
|---|
| 922 | |
|---|
| 923 | proc MakeWWWHelp {"topic {}" "anchor {}"} { |
|---|
| 924 | global expgui |
|---|
| 925 | if {$topic == ""} { |
|---|
| 926 | foreach item $expgui(notebookpagelist) { |
|---|
| 927 | if {[lindex $item 0] == $expgui(pagenow)} { |
|---|
| 928 | NetHelp [lindex $item 5] [lindex $item 6] $expgui(docdir) $expgui(website) |
|---|
| 929 | return |
|---|
| 930 | } |
|---|
| 931 | } |
|---|
| 932 | # this should not happen |
|---|
| 933 | NetHelp expgui.html "" $expgui(docdir) $expgui(website) |
|---|
| 934 | } elseif {$topic == "menu"} { |
|---|
| 935 | NetHelp expguic.html "" $expgui(docdir) $expgui(website) |
|---|
| 936 | } else { |
|---|
| 937 | NetHelp $topic $anchor $expgui(docdir) $expgui(website) |
|---|
| 938 | } |
|---|
| 939 | } |
|---|
| 940 | |
|---|
| 941 | # show help information |
|---|
| 942 | proc showhelp {} { |
|---|
| 943 | global expgui_helplist helpmsg |
|---|
| 944 | set helpmsg {} |
|---|
| 945 | set frm .help |
|---|
| 946 | catch {destroy $frm} |
|---|
| 947 | toplevel $frm |
|---|
| 948 | wm title $frm "Help Summary" |
|---|
| 949 | grid [label $frm.0 -text \ |
|---|
| 950 | "Click on an entry below to see information on the EXPGUI/GSAS topic" ] \ |
|---|
| 951 | -column 0 -columnspan 4 -row 0 |
|---|
| 952 | # grid [message $frm.help -textvariable helpmsg -relief groove] \ |
|---|
| 953 | # -column 0 -columnspan 4 -row 2 -sticky nsew |
|---|
| 954 | grid [text $frm.help -relief groove -bg beige -width 0\ |
|---|
| 955 | -height 0 -wrap word -yscrollcommand "$frm.escroll set"] \ |
|---|
| 956 | -column 0 -columnspan 3 -row 2 -sticky nsew |
|---|
| 957 | grid [scrollbar $frm.escroll -command "$frm.help yview"] \ |
|---|
| 958 | -column 4 -row 2 -sticky nsew |
|---|
| 959 | grid rowconfig $frm 1 -weight 1 -minsize 50 |
|---|
| 960 | grid rowconfig $frm 2 -weight 2 -pad 20 -minsize 150 |
|---|
| 961 | grid columnconfig $frm 0 -weight 1 |
|---|
| 962 | grid columnconfig $frm 2 -weight 1 |
|---|
| 963 | set lst [array names expgui_helplist] |
|---|
| 964 | grid [listbox $frm.cmds -relief raised -bd 2 \ |
|---|
| 965 | -yscrollcommand "$frm.scroll set" \ |
|---|
| 966 | -height 8 -width 0 -exportselection 0 ] \ |
|---|
| 967 | -column 0 -row 1 -sticky nse |
|---|
| 968 | grid [scrollbar $frm.scroll -command "$frm.cmds yview"] \ |
|---|
| 969 | -column 1 -row 1 -sticky nsew |
|---|
| 970 | foreach item [lsort -dictionary $lst] { |
|---|
| 971 | $frm.cmds insert end $item |
|---|
| 972 | } |
|---|
| 973 | if {[$frm.cmds curselection] == ""} {$frm.cmds selection set 0} |
|---|
| 974 | grid [button $frm.done -text Done -command "destroy $frm"] \ |
|---|
| 975 | -column 2 -row 1 |
|---|
| 976 | # bind $frm.cmds <ButtonRelease-1> \ |
|---|
| 977 | # "+set helpmsg \$expgui_helplist(\[$frm.cmds get \[$frm.cmds curselection\]\])" |
|---|
| 978 | bind $frm.cmds <ButtonRelease-1> \ |
|---|
| 979 | "+$frm.help config -state normal; $frm.help delete 0.0 end; \ |
|---|
| 980 | $frm.help insert end \$expgui_helplist(\[$frm.cmds get \[$frm.cmds curselection\]\]); \ |
|---|
| 981 | $frm.help config -state disabled" |
|---|
| 982 | |
|---|
| 983 | # get the size of the window and expand the message boxes to match |
|---|
| 984 | # update |
|---|
| 985 | # $frm.help config -width [winfo width $frm.help ] |
|---|
| 986 | } |
|---|
| 987 | |
|---|
| 988 | |
|---|
| 989 | #------------------------------------------------------------------------------ |
|---|
| 990 | # utilities |
|---|
| 991 | #------------------------------------------------------------------------------ |
|---|
| 992 | # run liveplot |
|---|
| 993 | proc liveplot {} { |
|---|
| 994 | global expgui liveplot wishshell expmap |
|---|
| 995 | set expnam [file root [file tail $expgui(expfile)]] |
|---|
| 996 | # which histograms are ready for use? |
|---|
| 997 | set validlist {} |
|---|
| 998 | foreach ihist $expmap(powderlist) { |
|---|
| 999 | if {[string range $expmap(htype_$ihist) 3 3] == ""} { |
|---|
| 1000 | lappend validlist $ihist |
|---|
| 1001 | } |
|---|
| 1002 | } |
|---|
| 1003 | if {[llength $validlist] == 0} { |
|---|
| 1004 | MyMessageBox -parent . -title "No Valid Histograms" \ |
|---|
| 1005 | -message "No histograms are ready to plot. Run GENLES and try again" \ |
|---|
| 1006 | -icon warning -helplink "expguierr.html NoValidHist" |
|---|
| 1007 | return |
|---|
| 1008 | } |
|---|
| 1009 | # use $liveplot(hst) if valid, the 1st entry otherwise |
|---|
| 1010 | if {[lsearch $validlist $liveplot(hst)] != -1} { |
|---|
| 1011 | exec $wishshell [file join $expgui(scriptdir) liveplot] \ |
|---|
| 1012 | $expnam $liveplot(hst) $liveplot(legend) & |
|---|
| 1013 | } else { |
|---|
| 1014 | exec $wishshell [file join $expgui(scriptdir) liveplot] \ |
|---|
| 1015 | $expnam [lindex $validlist 0] $liveplot(legend) & |
|---|
| 1016 | } |
|---|
| 1017 | } |
|---|
| 1018 | |
|---|
| 1019 | # run lstview |
|---|
| 1020 | proc lstview {} { |
|---|
| 1021 | global expgui wishshell |
|---|
| 1022 | set expnam [file root [file tail $expgui(expfile)]] |
|---|
| 1023 | exec $wishshell [file join $expgui(scriptdir) lstview] $expnam & |
|---|
| 1024 | } |
|---|
| 1025 | |
|---|
| 1026 | # run widplt |
|---|
| 1027 | proc widplt {} { |
|---|
| 1028 | global expgui wishshell |
|---|
| 1029 | exec $wishshell [file join $expgui(scriptdir) widplt] \ |
|---|
| 1030 | $expgui(expfile) & |
|---|
| 1031 | } |
|---|
| 1032 | |
|---|
| 1033 | # run bkgedit |
|---|
| 1034 | proc bkgedit {"hst {}"} { |
|---|
| 1035 | global expgui liveplot wishshell expmap |
|---|
| 1036 | set expnam [file root [file tail $expgui(expfile)]] |
|---|
| 1037 | if {$hst == ""} { |
|---|
| 1038 | # which histograms are ready for use? |
|---|
| 1039 | set validlist {} |
|---|
| 1040 | foreach ihist $expmap(powderlist) { |
|---|
| 1041 | if {[string range $expmap(htype_$ihist) 3 3] == "" || \ |
|---|
| 1042 | [string range $expmap(htype_$ihist) 3 3] == "*"} { |
|---|
| 1043 | lappend validlist $ihist |
|---|
| 1044 | } |
|---|
| 1045 | } |
|---|
| 1046 | if {[llength $validlist] == 0} { |
|---|
| 1047 | MyMessageBox -parent . -title "No Valid Histograms" \ |
|---|
| 1048 | -message "No histograms are ready to plot. Run POWPREF and try again" \ |
|---|
| 1049 | -icon warning -helplink "expguierr.html NoValidHist" |
|---|
| 1050 | return |
|---|
| 1051 | } |
|---|
| 1052 | # use $liveplot(hst) if valid, the 1st entry otherwise |
|---|
| 1053 | if {[lsearch $validlist $liveplot(hst)] != -1} { |
|---|
| 1054 | set hst $liveplot(hst) |
|---|
| 1055 | } else { |
|---|
| 1056 | set hst [lindex $validlist 0] |
|---|
| 1057 | } |
|---|
| 1058 | } |
|---|
| 1059 | if {$expgui(autoiconify)} {wm iconify .} |
|---|
| 1060 | exec $wishshell [file join $expgui(scriptdir) bkgedit] \ |
|---|
| 1061 | $expnam $hst $liveplot(legend) |
|---|
| 1062 | if {$expgui(autoiconify)} {wm deiconify .} |
|---|
| 1063 | # check for changes in the .EXP file immediately |
|---|
| 1064 | whenidle |
|---|
| 1065 | } |
|---|
| 1066 | |
|---|
| 1067 | # compute the composition for each phase and display in a dialog |
|---|
| 1068 | proc composition {} { |
|---|
| 1069 | global expmap expgui |
|---|
| 1070 | set Z 1 |
|---|
| 1071 | foreach phase $expmap(phaselist) type $expmap(phasetype) { |
|---|
| 1072 | if {$type > 2} continue |
|---|
| 1073 | catch {unset total} |
|---|
| 1074 | foreach atom $expmap(atomlist_$phase) { |
|---|
| 1075 | set type [atominfo $phase $atom type] |
|---|
| 1076 | set mult [atominfo $phase $atom mult] |
|---|
| 1077 | if [catch {set total($type)}] { |
|---|
| 1078 | set total($type) [expr \ |
|---|
| 1079 | $mult * [atominfo $phase $atom frac]] |
|---|
| 1080 | } else { |
|---|
| 1081 | set total($type) [expr $total($type) + \ |
|---|
| 1082 | $mult * [atominfo $phase $atom frac]] |
|---|
| 1083 | } |
|---|
| 1084 | if {$mult > $Z} {set Z $mult} |
|---|
| 1085 | } |
|---|
| 1086 | append text "\nPhase $phase\n" |
|---|
| 1087 | append text " Unit cell contents\n" |
|---|
| 1088 | foreach type [lsort [array names total]] { |
|---|
| 1089 | append text " $type[format %8.3f $total($type)]" |
|---|
| 1090 | } |
|---|
| 1091 | append text "\n\n" |
|---|
| 1092 | |
|---|
| 1093 | append text " Asymmetric Unit contents (Z=$Z)\n" |
|---|
| 1094 | foreach type [lsort [array names total]] { |
|---|
| 1095 | append text " $type[format %8.3f [expr $total($type)/$Z]]" |
|---|
| 1096 | } |
|---|
| 1097 | append text "\n" |
|---|
| 1098 | } |
|---|
| 1099 | |
|---|
| 1100 | catch {destroy .comp} |
|---|
| 1101 | toplevel .comp -class MonoSpc |
|---|
| 1102 | bind .comp <Key-F1> "MakeWWWHelp expgui.html Composition" |
|---|
| 1103 | wm title .comp Composition |
|---|
| 1104 | pack [label .comp.results -text $text \ |
|---|
| 1105 | -justify left] -side top |
|---|
| 1106 | pack [frame .comp.box] -side top -expand y -fill x |
|---|
| 1107 | pack [button .comp.box.1 -text Close -command "destroy .comp"] -side left |
|---|
| 1108 | |
|---|
| 1109 | set lstnam [string toupper [file tail [file rootname $expgui(expfile)].LST]] |
|---|
| 1110 | pack [button .comp.box.2 -text "Save to $lstnam file" \ |
|---|
| 1111 | -command "writelst [list $text] ; destroy .comp"] -side left |
|---|
| 1112 | pack [button .comp.box.help -text Help -bg yellow \ |
|---|
| 1113 | -command "MakeWWWHelp expgui.html Composition"] \ |
|---|
| 1114 | -side right |
|---|
| 1115 | } |
|---|
| 1116 | |
|---|
| 1117 | # save coordinates in an MSI .xtl file |
|---|
| 1118 | proc exp2xtl {} { |
|---|
| 1119 | global expmap expgui |
|---|
| 1120 | catch {destroy .export} |
|---|
| 1121 | toplevel .export |
|---|
| 1122 | wm title .export "Export coordinates" |
|---|
| 1123 | bind .export <Key-F1> "MakeWWWHelp expgui.html ExportMSI" |
|---|
| 1124 | pack [label .export.lbl -text "Export coordinates in MSI .xtl format"\ |
|---|
| 1125 | ] -side top -anchor center |
|---|
| 1126 | pack [frame .export.ps] -side top -anchor w |
|---|
| 1127 | pack [label .export.ps.lbl -text "Select phase: "] -side left |
|---|
| 1128 | foreach num $expmap(phaselist) type $expmap(phasetype) { |
|---|
| 1129 | pack [button .export.ps.$num -text $num \ |
|---|
| 1130 | -command "SetExportPhase $num"] -side left |
|---|
| 1131 | if {$type == 4} { |
|---|
| 1132 | .export.ps.$num config -state disabled |
|---|
| 1133 | } |
|---|
| 1134 | } |
|---|
| 1135 | pack [frame .export.sg] -side top |
|---|
| 1136 | pack [label .export.sg.1 -text "Space Group: "] -side left |
|---|
| 1137 | pack [entry .export.sg.2 -textvariable expgui(export_sg) -width 8] -side left |
|---|
| 1138 | pack [checkbutton .export.sg.3 -variable expgui(export_orig) -text "Origin 2"] -side left |
|---|
| 1139 | pack [frame .export.but] -side top -fill x -expand yes |
|---|
| 1140 | if {[llength $expmap(phaselist)] > 0} { |
|---|
| 1141 | pack [button .export.but.1 -text Write -command writextl] -side left |
|---|
| 1142 | SetExportPhase [lindex $expmap(phaselist) 0] |
|---|
| 1143 | } |
|---|
| 1144 | pack [button .export.but.2 -text Quit -command "destroy .export"] -side left |
|---|
| 1145 | pack [button .export.but.help -text Help -bg yellow \ |
|---|
| 1146 | -command "MakeWWWHelp expgui.html ExportMSI"] \ |
|---|
| 1147 | -side right |
|---|
| 1148 | # force the window to stay on top |
|---|
| 1149 | putontop .export |
|---|
| 1150 | afterputontop |
|---|
| 1151 | } |
|---|
| 1152 | |
|---|
| 1153 | proc SetExportPhase {phase} { |
|---|
| 1154 | global expmap expgui |
|---|
| 1155 | foreach n $expmap(phaselist) type $expmap(phasetype) { |
|---|
| 1156 | if {$n == $phase && $type != 4} { |
|---|
| 1157 | .export.ps.$n config -relief sunken |
|---|
| 1158 | set expgui(export_phase) $phase |
|---|
| 1159 | # remove spaces from space group |
|---|
| 1160 | set spacegroup [phaseinfo $phase spacegroup] |
|---|
| 1161 | if {[string toupper [string range $spacegroup end end]] == "R"} { |
|---|
| 1162 | set spacegroup [string range $spacegroup 0 \ |
|---|
| 1163 | [expr [string length $spacegroup]-2]] |
|---|
| 1164 | } |
|---|
| 1165 | regsub -all " " $spacegroup "" expgui(export_sg) |
|---|
| 1166 | } else { |
|---|
| 1167 | .export.ps.$n config -relief raised |
|---|
| 1168 | } |
|---|
| 1169 | } |
|---|
| 1170 | } |
|---|
| 1171 | |
|---|
| 1172 | |
|---|
| 1173 | proc writextl {} { |
|---|
| 1174 | global expgui expmap |
|---|
| 1175 | if ![catch { |
|---|
| 1176 | set phase $expgui(export_phase) |
|---|
| 1177 | set origin $expgui(export_orig) |
|---|
| 1178 | set spsymbol $expgui(export_sg) |
|---|
| 1179 | } errmsg] { |
|---|
| 1180 | set errmsg {} |
|---|
| 1181 | if {$phase == ""} { |
|---|
| 1182 | set errmsg "Error: invalid phase number $phase" |
|---|
| 1183 | } elseif {$spsymbol == ""} { |
|---|
| 1184 | set errmsg "Error: invalid Space Group: $spsymbol" |
|---|
| 1185 | } |
|---|
| 1186 | } |
|---|
| 1187 | if {$errmsg != ""} { |
|---|
| 1188 | MyMessageBox -parent . -title "Export error" \ |
|---|
| 1189 | -message "Export error: $errmsg" -icon warning |
|---|
| 1190 | return |
|---|
| 1191 | } |
|---|
| 1192 | |
|---|
| 1193 | if [catch { |
|---|
| 1194 | set filnam [file rootname $expgui(expfile)]_${phase}.xtl |
|---|
| 1195 | set spacegroup [phaseinfo $phase spacegroup] |
|---|
| 1196 | set fp [open $filnam w] |
|---|
| 1197 | puts $fp "TITLE from $expgui(expfile)" |
|---|
| 1198 | puts $fp "TITLE history [string trim [lindex [exphistory last] 1]]" |
|---|
| 1199 | puts $fp "TITLE phase [phaseinfo $phase name]" |
|---|
| 1200 | puts $fp "CELL" |
|---|
| 1201 | puts $fp " [phaseinfo $phase a] [phaseinfo $phase b] [phaseinfo $phase c] [phaseinfo $phase alpha] [phaseinfo $phase beta] [phaseinfo $phase gamma]" |
|---|
| 1202 | |
|---|
| 1203 | puts $fp "Symmetry Label $spsymbol" |
|---|
| 1204 | set rhomb 0 |
|---|
| 1205 | if {[string toupper [string range $spacegroup end end]] == "R"} { |
|---|
| 1206 | set rhomb 1 |
|---|
| 1207 | } |
|---|
| 1208 | if $origin { |
|---|
| 1209 | puts $fp "Symmetry Qualifier origin_2" |
|---|
| 1210 | } |
|---|
| 1211 | if $rhomb { |
|---|
| 1212 | puts $fp "Symmetry Qualifier rhombohedral" |
|---|
| 1213 | } |
|---|
| 1214 | |
|---|
| 1215 | puts $fp "ATOMS" |
|---|
| 1216 | puts $fp "NAME X Y Z UISO OCCUP" |
|---|
| 1217 | foreach atom $expmap(atomlist_$phase) { |
|---|
| 1218 | set label [atominfo $phase $atom label] |
|---|
| 1219 | # remove () characters |
|---|
| 1220 | regsub -all "\[()\]" $label "" label |
|---|
| 1221 | # are there anisotropic atoms? |
|---|
| 1222 | if {[atominfo $phase $atom temptype] == "A"} { |
|---|
| 1223 | set uiso [expr \ |
|---|
| 1224 | ([atominfo $phase $atom U11] + \ |
|---|
| 1225 | [atominfo $phase $atom U22] + \ |
|---|
| 1226 | [atominfo $phase $atom U33]) / 3.] |
|---|
| 1227 | } else { |
|---|
| 1228 | set uiso [atominfo $phase $atom Uiso] |
|---|
| 1229 | } |
|---|
| 1230 | puts $fp "$label [atominfo $phase $atom x] \ |
|---|
| 1231 | [atominfo $phase $atom y] [atominfo $phase $atom z] \ |
|---|
| 1232 | $uiso [atominfo $phase $atom frac]" |
|---|
| 1233 | } |
|---|
| 1234 | } errmsg] { |
|---|
| 1235 | catch {close $fp} |
|---|
| 1236 | MyMessageBox -parent . -title "Export error" \ |
|---|
| 1237 | -message "Export error: $errmsg" -icon warning |
|---|
| 1238 | } else { |
|---|
| 1239 | catch {close $fp} |
|---|
| 1240 | MyMessageBox -parent . -title "Done" \ |
|---|
| 1241 | -message "File [file tail $filnam] was written in directory [file dirname $filnam]" |
|---|
| 1242 | } |
|---|
| 1243 | if {[llength $expmap(phaselist)] == 1} {destroy .export} |
|---|
| 1244 | } |
|---|
| 1245 | |
|---|
| 1246 | # Delete History Records |
|---|
| 1247 | proc DeleteHistoryRecords {{msg ""}} { |
|---|
| 1248 | global expgui |
|---|
| 1249 | set frm .history |
|---|
| 1250 | catch {destroy $frm} |
|---|
| 1251 | toplevel $frm |
|---|
| 1252 | bind $frm <Key-F1> "MakeWWWHelp expgui.html DeleteHistoryRecords" |
|---|
| 1253 | if {[string trim $msg] == ""} { |
|---|
| 1254 | set msg "There are [CountHistory] history records" |
|---|
| 1255 | } |
|---|
| 1256 | pack [frame $frm.1 -bd 2 -relief groove] -padx 3 -pady 3 -side left |
|---|
| 1257 | pack [label $frm.1.0 -text $msg] -side top |
|---|
| 1258 | pack [frame $frm.1.1] -side top |
|---|
| 1259 | pack [label $frm.1.1.1 -text "Number of entries to keep"] -side left |
|---|
| 1260 | pack [entry $frm.1.1.2 -width 3 -textvariable expgui(historyKeep)\ |
|---|
| 1261 | ] -side left |
|---|
| 1262 | set expgui(historyKeep) 10 |
|---|
| 1263 | pack [checkbutton $frm.1.2 -text renumber -variable expgui(renumber)] -side top |
|---|
| 1264 | set expgui(renumber) 1 |
|---|
| 1265 | pack [frame $frm.2] -padx 3 -pady 3 -side left -fill both -expand yes |
|---|
| 1266 | pack [button $frm.2.help -text Help -bg yellow \ |
|---|
| 1267 | -command "MakeWWWHelp expgui.html DeleteHistoryRecords"] -side top |
|---|
| 1268 | pack [button $frm.2.4 -text Quit \ |
|---|
| 1269 | -command {destroy .history}] -side bottom |
|---|
| 1270 | pack [button $frm.2.3 -text OK \ |
|---|
| 1271 | -command { |
|---|
| 1272 | if ![catch {expr $expgui(historyKeep)}] { |
|---|
| 1273 | DeleteHistory $expgui(historyKeep) $expgui(renumber) |
|---|
| 1274 | set expgui(changed) 1 |
|---|
| 1275 | destroy .history |
|---|
| 1276 | } |
|---|
| 1277 | }] -side bottom |
|---|
| 1278 | bind $frm <Return> "$frm.2.3 invoke" |
|---|
| 1279 | |
|---|
| 1280 | # force the window to stay on top |
|---|
| 1281 | putontop $frm |
|---|
| 1282 | focus $frm.2.3 |
|---|
| 1283 | tkwait window $frm |
|---|
| 1284 | afterputontop |
|---|
| 1285 | } |
|---|
| 1286 | |
|---|
| 1287 | #------------------------------------------------------------------------------ |
|---|
| 1288 | # GSAS interface routines |
|---|
| 1289 | #------------------------------------------------------------------------------ |
|---|
| 1290 | # run a GSAS program that does not require an experiment file |
|---|
| 1291 | proc runGSASprog {proglist "concurrent 1"} { |
|---|
| 1292 | # if concurrent is 0, EXPGUI runs the GSAS program in background |
|---|
| 1293 | # -- this is not currently needed anywhere where the .EXP file is not. |
|---|
| 1294 | global expgui tcl_platform |
|---|
| 1295 | set cmd {} |
|---|
| 1296 | foreach prog $proglist { |
|---|
| 1297 | if {$tcl_platform(platform) == "windows"} { |
|---|
| 1298 | append cmd " \"$expgui(gsasexe)/${prog}.exe \" " |
|---|
| 1299 | } else { |
|---|
| 1300 | if {$cmd != ""} {append cmd "\;"} |
|---|
| 1301 | append cmd "[file join $expgui(gsasexe) $prog]" |
|---|
| 1302 | } |
|---|
| 1303 | } |
|---|
| 1304 | forknewterm $prog $cmd [expr !$concurrent] 1 |
|---|
| 1305 | } |
|---|
| 1306 | |
|---|
| 1307 | # run a GSAS program that requires an experiment file for input/output |
|---|
| 1308 | proc runGSASwEXP {proglist "concurrent 0"} { |
|---|
| 1309 | # most programs that require the .EXP file change it and |
|---|
| 1310 | # cannot be run concurrently |
|---|
| 1311 | global expgui tcl_platform |
|---|
| 1312 | # Save the current exp file |
|---|
| 1313 | savearchiveexp |
|---|
| 1314 | # load the changed .EXP file automatically? |
|---|
| 1315 | if {$expgui(autoexpload)} { |
|---|
| 1316 | # disable the file changed monitor |
|---|
| 1317 | set expgui(expModifiedLast) 0 |
|---|
| 1318 | } |
|---|
| 1319 | set cmd {} |
|---|
| 1320 | set expnam [file root [file tail $expgui(expfile)]] |
|---|
| 1321 | foreach prog $proglist { |
|---|
| 1322 | if {$prog == "expedt" && $expgui(archive)} archiveexp |
|---|
| 1323 | if {$tcl_platform(platform) == "windows"} { |
|---|
| 1324 | append cmd " \"$expgui(gsasexe)/${prog}.exe $expnam \" " |
|---|
| 1325 | } else { |
|---|
| 1326 | if {$cmd != ""} {append cmd "\;"} |
|---|
| 1327 | append cmd "[file join $expgui(gsasexe) $prog] $expnam" |
|---|
| 1328 | } |
|---|
| 1329 | } |
|---|
| 1330 | forknewterm "$prog -- $expnam" $cmd [expr !$concurrent] 1 |
|---|
| 1331 | # load the changed .EXP file automatically? |
|---|
| 1332 | if {$expgui(autoexpload)} { |
|---|
| 1333 | # load the revised exp file |
|---|
| 1334 | loadexp $expgui(expfile) |
|---|
| 1335 | } |
|---|
| 1336 | } |
|---|
| 1337 | |
|---|
| 1338 | # write text to the .LST file |
|---|
| 1339 | proc writelst {text} { |
|---|
| 1340 | global expgui |
|---|
| 1341 | set lstnam [file rootname $expgui(expfile)].LST |
|---|
| 1342 | set fp [open $lstnam a] |
|---|
| 1343 | puts $fp "\n-----------------------------------------------------------------" |
|---|
| 1344 | puts $fp $text |
|---|
| 1345 | puts $fp "-----------------------------------------------------------------\n" |
|---|
| 1346 | close $fp |
|---|
| 1347 | } |
|---|
| 1348 | |
|---|
| 1349 | |
|---|
| 1350 | # optionally run disagl as a windowless process, w/results in a separate window |
|---|
| 1351 | proc rundisagl {} { |
|---|
| 1352 | global expgui txtvw tcl_version tcl_platform |
|---|
| 1353 | if {$expgui(disaglSeparateBox)} { |
|---|
| 1354 | set root [file root $expgui(expfile)] |
|---|
| 1355 | catch {file delete -force $root.tmp} |
|---|
| 1356 | catch {file rename -force $root.LST $root.OLS} |
|---|
| 1357 | # PSW reports this does not happen right away on windows |
|---|
| 1358 | set i 0 |
|---|
| 1359 | while {$i < 10 && [file exists $root.LST]} { |
|---|
| 1360 | # debug code |
|---|
| 1361 | #catch {console show} |
|---|
| 1362 | #puts "try $i" |
|---|
| 1363 | # end debug code |
|---|
| 1364 | after 100 |
|---|
| 1365 | incr i |
|---|
| 1366 | } |
|---|
| 1367 | if {[file exists $root.LST]} { |
|---|
| 1368 | # it was not possible to rename the file |
|---|
| 1369 | MyMessageBox -parent . -title "Rename Problem" \ |
|---|
| 1370 | -message "Unable to rename $root.LST. Please close LSTVIEW and try again" \ |
|---|
| 1371 | -icon warning -helplink "expguierr.html NoRename" |
|---|
| 1372 | return |
|---|
| 1373 | } |
|---|
| 1374 | |
|---|
| 1375 | #run the program |
|---|
| 1376 | pleasewait "Running DISAGL" |
|---|
| 1377 | # create an empty input file |
|---|
| 1378 | close [open disagl.inp w] |
|---|
| 1379 | catch {exec [file join $expgui(gsasexe) disagl] \ |
|---|
| 1380 | [file tail $root] < disagl.inp > disagl.out} |
|---|
| 1381 | catch {file rename -force $root.LST $root.tmp} |
|---|
| 1382 | catch {file delete -force disagl.inp disagl.out} |
|---|
| 1383 | catch {file rename -force $root.OLS $root.LST} |
|---|
| 1384 | donewait |
|---|
| 1385 | # open a new window |
|---|
| 1386 | catch {toplevel .disagl} |
|---|
| 1387 | catch {eval grid forget [grid slaves .disagl]} |
|---|
| 1388 | text .disagl.txt -width 100 -wrap none \ |
|---|
| 1389 | -yscrollcommand ".disagl.yscroll set" \ |
|---|
| 1390 | -xscrollcommand ".disagl.xscroll set" |
|---|
| 1391 | scrollbar .disagl.yscroll -command ".disagl.txt yview" |
|---|
| 1392 | scrollbar .disagl.xscroll -command ".disagl.txt xview" -orient horizontal |
|---|
| 1393 | grid .disagl.xscroll -column 0 -row 2 -sticky ew |
|---|
| 1394 | grid .disagl.txt -column 0 -row 1 -sticky nsew |
|---|
| 1395 | grid .disagl.yscroll -column 1 -row 1 -sticky ns |
|---|
| 1396 | grid [frame .disagl.f] -column 0 -columnspan 2 -row 3 -sticky ew |
|---|
| 1397 | grid columnconfig .disagl.f 2 -weight 1 |
|---|
| 1398 | grid [button .disagl.f.close -text "Close & Delete" \ |
|---|
| 1399 | -command "destroy .disagl; file delete $root.tmp"] \ |
|---|
| 1400 | -column 3 -row 0 -sticky e |
|---|
| 1401 | grid [button .disagl.f.rename -text "Close & Save as .DIS" \ |
|---|
| 1402 | -command "destroy .disagl; file rename -force $root.tmp $root.DIS"] \ |
|---|
| 1403 | -column 4 -row 0 -sticky e |
|---|
| 1404 | # allow font changes on the fly |
|---|
| 1405 | if {$tcl_version >= 8.0} { |
|---|
| 1406 | .disagl.txt config -font $txtvw(font) |
|---|
| 1407 | set fontbut [tk_optionMenu .disagl.f.font txtvw(font) ""] |
|---|
| 1408 | grid .disagl.f.font -column 1 -row 0 -sticky w |
|---|
| 1409 | grid [label .disagl.f.t -text font:] -column 0 -row 0 -sticky w |
|---|
| 1410 | $fontbut delete 0 end |
|---|
| 1411 | foreach f {5 6 7 8 9 10 11 12 13 14 15 16} { |
|---|
| 1412 | $fontbut add command -label "Courier $f" -font "Courier $f"\ |
|---|
| 1413 | -command "set txtvw(font) \"Courier $f\"; \ |
|---|
| 1414 | .disagl.txt config -font \$txtvw(font)" |
|---|
| 1415 | } |
|---|
| 1416 | } |
|---|
| 1417 | |
|---|
| 1418 | grid columnconfigure .disagl 0 -weight 1 |
|---|
| 1419 | grid rowconfigure .disagl 1 -weight 1 |
|---|
| 1420 | wm title .disagl "DISAGL results $expgui(expfile)" |
|---|
| 1421 | wm iconname .disagl "DISAGL $root" |
|---|
| 1422 | set in [open $root.tmp r] |
|---|
| 1423 | .disagl.txt insert end [read $in] |
|---|
| 1424 | close $in |
|---|
| 1425 | bind all {destroy .disagl} |
|---|
| 1426 | bind .disagl ".disagl.txt yview scroll -1 page" |
|---|
| 1427 | bind .disagl ".disagl.txt yview scroll 1 page" |
|---|
| 1428 | bind .disagl ".disagl.txt xview scroll 1 unit" |
|---|
| 1429 | bind .disagl ".disagl.txt xview scroll -1 unit" |
|---|
| 1430 | bind .disagl ".disagl.txt yview scroll -1 unit" |
|---|
| 1431 | bind .disagl ".disagl.txt yview scroll 1 unit" |
|---|
| 1432 | bind .disagl ".disagl.txt yview 0" |
|---|
| 1433 | bind .disagl ".disagl.txt yview end" |
|---|
| 1434 | # don't disable in Win as this prevents the highlighting of selected text |
|---|
| 1435 | if {$tcl_platform(platform) != "windows"} { |
|---|
| 1436 | .disagl.txt config -state disabled |
|---|
| 1437 | } |
|---|
| 1438 | } else { |
|---|
| 1439 | runGSASwEXP disagl |
|---|
| 1440 | } |
|---|
| 1441 | } |
|---|
| 1442 | |
|---|
| 1443 | #------------------------------------------------------------------------------ |
|---|
| 1444 | # file conversions |
|---|
| 1445 | #------------------------------------------------------------------------------ |
|---|
| 1446 | proc convfile {} { |
|---|
| 1447 | global expgui |
|---|
| 1448 | set frm .file |
|---|
| 1449 | catch {destroy $frm} |
|---|
| 1450 | toplevel $frm |
|---|
| 1451 | wm title $frm "Convert File" |
|---|
| 1452 | bind $frm <Key-F1> "MakeWWWHelp expgui.html ConvertWin" |
|---|
| 1453 | pack [frame [set frmA $frm.1] -bd 2 -relief groove] -padx 3 -pady 3 -side left |
|---|
| 1454 | pack [frame [set frmC $frm.3] ] -padx 3 -pady 3 \ |
|---|
| 1455 | -side left -fill y -expand yes |
|---|
| 1456 | pack [button $frmC.help -text Help -bg yellow \ |
|---|
| 1457 | -command "MakeWWWHelp expgui.html ConvertWin"] -side top |
|---|
| 1458 | pack [button $frmC.q -text Quit -command "destroy $frm"] -side bottom |
|---|
| 1459 | pack [button $frmC.b -text Convert -command "ValidWinCnv $frm"] \ |
|---|
| 1460 | -side bottom |
|---|
| 1461 | pack [label $frmA.0 -text "Select a file to convert"] -side top -anchor center |
|---|
| 1462 | winfilebox $frm |
|---|
| 1463 | bind $frm <Return> "ValidWinCnv $frm" |
|---|
| 1464 | |
|---|
| 1465 | # force the window to stay on top |
|---|
| 1466 | putontop $frm |
|---|
| 1467 | focus $frmC.q |
|---|
| 1468 | tkwait window $frm |
|---|
| 1469 | afterputontop |
|---|
| 1470 | } |
|---|
| 1471 | |
|---|
| 1472 | # validate the files and make the conversion |
|---|
| 1473 | proc ValidWinCnv {frm} { |
|---|
| 1474 | global expgui |
|---|
| 1475 | # change backslashes to something sensible |
|---|
| 1476 | regsub -all {\\} $expgui(FileMenuCnvName) / expgui(FileMenuCnvName) |
|---|
| 1477 | # allow entry of D: for D:/ and D:TEST for d:/TEST |
|---|
| 1478 | if {[string first : $expgui(FileMenuCnvName)] != -1 && \ |
|---|
| 1479 | [string first :/ $expgui(FileMenuCnvName)] == -1} { |
|---|
| 1480 | regsub : $expgui(FileMenuCnvName) :/ expgui(FileMenuCnvName) |
|---|
| 1481 | } |
|---|
| 1482 | if {$expgui(FileMenuCnvName) == "<Parent>"} { |
|---|
| 1483 | set expgui(FileMenuDir) [file dirname [set expgui(FileMenuDir)] ] |
|---|
| 1484 | ChooseWinCnv $frm |
|---|
| 1485 | return |
|---|
| 1486 | } elseif [file isdirectory \ |
|---|
| 1487 | [file join $expgui(FileMenuDir) $expgui(FileMenuCnvName)]] { |
|---|
| 1488 | if {$expgui(FileMenuCnvName) != "."} { |
|---|
| 1489 | set expgui(FileMenuDir) \ |
|---|
| 1490 | [file join $expgui(FileMenuDir) $expgui(FileMenuCnvName)] |
|---|
| 1491 | } |
|---|
| 1492 | ChooseWinCnv $frm |
|---|
| 1493 | return |
|---|
| 1494 | } |
|---|
| 1495 | |
|---|
| 1496 | set file [file join $expgui(FileMenuDir) $expgui(FileMenuCnvName)] |
|---|
| 1497 | if ![file exists $file] { |
|---|
| 1498 | MyMessageBox -parent $frm -title "Convert Error" \ |
|---|
| 1499 | -message "File $file does not exist" -icon error |
|---|
| 1500 | return |
|---|
| 1501 | } |
|---|
| 1502 | |
|---|
| 1503 | set tmpname "[file join [file dirname $file] tempfile.xxx]" |
|---|
| 1504 | set oldname "[file rootname $file].org" |
|---|
| 1505 | if [file exists $oldname] { |
|---|
| 1506 | set ans [MyMessageBox -parent . -title "Overwrite?" \ |
|---|
| 1507 | -message "File [file tail $oldname] exists in [file dirname $oldname]. OK to overwrite?" \ |
|---|
| 1508 | -icon warning -type {Overwrite Cancel} -default Overwrite \ |
|---|
| 1509 | -helplink "expguierr.html OverwriteCnv"] |
|---|
| 1510 | if {[string tolower $ans] == "cancel"} return |
|---|
| 1511 | catch {file delete $oldname} |
|---|
| 1512 | } |
|---|
| 1513 | |
|---|
| 1514 | if [catch { |
|---|
| 1515 | set in [open $file r] |
|---|
| 1516 | set out [open $tmpname w] |
|---|
| 1517 | fconfigure $out -translation crlf |
|---|
| 1518 | set len [gets $in line] |
|---|
| 1519 | if {$len > 160} { |
|---|
| 1520 | # this is a UNIX file. Hope there are no control characters |
|---|
| 1521 | set i 0 |
|---|
| 1522 | set j 79 |
|---|
| 1523 | while {$j < $len} { |
|---|
| 1524 | puts $out [string range $line $i $j] |
|---|
| 1525 | incr i 80 |
|---|
| 1526 | incr j 80 |
|---|
| 1527 | } |
|---|
| 1528 | } else { |
|---|
| 1529 | while {$len >= 0} { |
|---|
| 1530 | append line " " |
|---|
| 1531 | append line " " |
|---|
| 1532 | set line [string range $line 0 79] |
|---|
| 1533 | puts $out $line |
|---|
| 1534 | set len [gets $in line] |
|---|
| 1535 | } |
|---|
| 1536 | } |
|---|
| 1537 | close $in |
|---|
| 1538 | close $out |
|---|
| 1539 | file rename -force $file $oldname |
|---|
| 1540 | file rename -force $tmpname $file |
|---|
| 1541 | } errmsg] { |
|---|
| 1542 | MyMessageBox -parent $frm -title "Conversion error" \ |
|---|
| 1543 | -message "Error in conversion:\n$errmsg" -icon warning |
|---|
| 1544 | } else { |
|---|
| 1545 | set ans [MyMessageBox -parent $frm -title "More?" \ |
|---|
| 1546 | -message "File [file tail $file] converted.\n(Original saved as [file tail $oldname]).\n\n Convert more files?" \ |
|---|
| 1547 | -type yesno -default no] |
|---|
| 1548 | if {$ans == "no"} {destroy $frm} |
|---|
| 1549 | } |
|---|
| 1550 | } |
|---|
| 1551 | |
|---|
| 1552 | # create a file box |
|---|
| 1553 | proc winfilebox {frm} { |
|---|
| 1554 | global expgui |
|---|
| 1555 | set bx $frm.1 |
|---|
| 1556 | pack [frame $bx.top] -side top |
|---|
| 1557 | pack [label $bx.top.a -text "Directory" ] -side left |
|---|
| 1558 | set expgui(FileDirButtonMenu) [tk_optionMenu $bx.top.d expgui(FileMenuDir) [pwd] ] |
|---|
| 1559 | pack $bx.top.d -side left |
|---|
| 1560 | set expgui(FileMenuDir) [pwd] |
|---|
| 1561 | # the icon below is from tk8.0/tkfbox.tcl |
|---|
| 1562 | set upfolder [image create bitmap -data { |
|---|
| 1563 | #define updir_width 28 |
|---|
| 1564 | #define updir_height 16 |
|---|
| 1565 | static char updir_bits[] = { |
|---|
| 1566 | 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x00, 0x00, 0x40, 0x20, 0x00, 0x00, |
|---|
| 1567 | 0x20, 0x40, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x01, 0x10, 0x00, 0x00, 0x01, |
|---|
| 1568 | 0x10, 0x02, 0x00, 0x01, 0x10, 0x07, 0x00, 0x01, 0x90, 0x0f, 0x00, 0x01, |
|---|
| 1569 | 0x10, 0x02, 0x00, 0x01, 0x10, 0x02, 0x00, 0x01, 0x10, 0x02, 0x00, 0x01, |
|---|
| 1570 | 0x10, 0xfe, 0x07, 0x01, 0x10, 0x00, 0x00, 0x01, 0x10, 0x00, 0x00, 0x01, |
|---|
| 1571 | 0xf0, 0xff, 0xff, 0x01};}] |
|---|
| 1572 | |
|---|
| 1573 | pack [button $bx.top.b -image $upfolder \ |
|---|
| 1574 | -command "updir; ChooseWinCnv $frm" ] |
|---|
| 1575 | pack [frame $bx.a -width 200 -height 75] -side top -expand yes -fill both |
|---|
| 1576 | listbox $bx.a.files -relief raised -bd 2 \ |
|---|
| 1577 | -yscrollcommand "sync2boxes $bx.a.files $bx.a.dates $bx.a.scroll" \ |
|---|
| 1578 | -height 15 -width 0 -exportselection 0 |
|---|
| 1579 | listbox $bx.a.dates -relief raised -bd 2 \ |
|---|
| 1580 | -yscrollcommand "sync2boxes $bx.a.dates $bx.a.files $bx.a.scroll" \ |
|---|
| 1581 | -height 15 -width 0 -takefocus 0 -exportselection 0 |
|---|
| 1582 | scrollbar $bx.a.scroll -command "move2boxesY \" $bx.a.files $bx.a.dates \" " |
|---|
| 1583 | ChooseWinCnv $frm |
|---|
| 1584 | bind $bx.a.files <ButtonRelease-1> "ReleaseWinCnv $frm" |
|---|
| 1585 | bind $bx.a.dates <ButtonRelease-1> "ReleaseWinCnv $frm" |
|---|
| 1586 | bind $bx.a.files <Double-1> "SelectWinCnv $frm" |
|---|
| 1587 | bind $bx.a.dates <Double-1> "SelectWinCnv $frm" |
|---|
| 1588 | pack $bx.a.scroll -side left -fill y |
|---|
| 1589 | pack $bx.a.files $bx.a.dates -side left -fill both -expand yes |
|---|
| 1590 | pack [entry $bx.c -textvariable expgui(FileMenuCnvName)] -side top |
|---|
| 1591 | } |
|---|
| 1592 | |
|---|
| 1593 | # set the box or file in the selection window |
|---|
| 1594 | proc ReleaseWinCnv {frm} { |
|---|
| 1595 | global expgui |
|---|
| 1596 | set files $frm.1.a.files |
|---|
| 1597 | set dates $frm.1.a.dates |
|---|
| 1598 | set select [$files curselection] |
|---|
| 1599 | if {$select == ""} { |
|---|
| 1600 | set select [$dates curselection] |
|---|
| 1601 | } |
|---|
| 1602 | if {$select == ""} { |
|---|
| 1603 | set expgui(FileMenuCnvName) "" |
|---|
| 1604 | } else { |
|---|
| 1605 | set expgui(FileMenuCnvName) [string trim [$files get $select]] |
|---|
| 1606 | } |
|---|
| 1607 | if {$expgui(FileMenuCnvName) == "<Parent>"} { |
|---|
| 1608 | set expgui(FileMenuDir) [file dirname $expgui(FileMenuDir)] |
|---|
| 1609 | ChooseWinCnv $frm |
|---|
| 1610 | } elseif [file isdirectory \ |
|---|
| 1611 | [file join [set expgui(FileMenuDir)] $expgui(FileMenuCnvName)]] { |
|---|
| 1612 | if {$expgui(FileMenuCnvName) != "."} { |
|---|
| 1613 | set expgui(FileMenuDir) [file join $expgui(FileMenuDir) $expgui(FileMenuCnvName)] |
|---|
| 1614 | ChooseWinCnv $frm |
|---|
| 1615 | } |
|---|
| 1616 | } |
|---|
| 1617 | return |
|---|
| 1618 | } |
|---|
| 1619 | |
|---|
| 1620 | # select a file or directory -- called on double click |
|---|
| 1621 | proc SelectWinCnv {frm} { |
|---|
| 1622 | global expgui |
|---|
| 1623 | set files $frm.1.a.files |
|---|
| 1624 | set dates $frm.1.a.dates |
|---|
| 1625 | set select [$files curselection] |
|---|
| 1626 | if {$select == ""} { |
|---|
| 1627 | set select [$dates curselection] |
|---|
| 1628 | } |
|---|
| 1629 | if {$select == ""} { |
|---|
| 1630 | set file . |
|---|
| 1631 | } else { |
|---|
| 1632 | set file [string trim [$files get $select]] |
|---|
| 1633 | } |
|---|
| 1634 | if {$file == "<Parent>"} { |
|---|
| 1635 | set expgui(FileMenuDir) [file dirname [set expgui(FileMenuDir)] ] |
|---|
| 1636 | ChooseWinCnv $frm |
|---|
| 1637 | } elseif [file isdirectory [file join [set expgui(FileMenuDir)] $file]] { |
|---|
| 1638 | if {$file != "."} { |
|---|
| 1639 | set expgui(FileMenuDir) [file join [set expgui(FileMenuDir)] $file] |
|---|
| 1640 | ChooseWinCnv $frm |
|---|
| 1641 | } |
|---|
| 1642 | } else { |
|---|
| 1643 | set expgui(FileMenuCnvName) [file tail $file] |
|---|
| 1644 | ValidWinCnv $frm |
|---|
| 1645 | } |
|---|
| 1646 | } |
|---|
| 1647 | |
|---|
| 1648 | # fill the files & dates & Directory selection box with current directory, |
|---|
| 1649 | # also called when box is created to fill it |
|---|
| 1650 | proc ChooseWinCnv {frm} { |
|---|
| 1651 | global expgui |
|---|
| 1652 | set files $frm.1.a.files |
|---|
| 1653 | set dates $frm.1.a.dates |
|---|
| 1654 | set expgui(FileMenuCnvName) {} |
|---|
| 1655 | $files delete 0 end |
|---|
| 1656 | $dates delete 0 end |
|---|
| 1657 | $files insert end {<Parent>} |
|---|
| 1658 | $dates insert end {(Directory)} |
|---|
| 1659 | set filelist [glob -nocomplain \ |
|---|
| 1660 | [file join [set expgui(FileMenuDir)] *] ] |
|---|
| 1661 | foreach file [lsort -dictionary $filelist] { |
|---|
| 1662 | if {[file isdirectory $file]} { |
|---|
| 1663 | $files insert end [file tail $file] |
|---|
| 1664 | $dates insert end {(Directory)} |
|---|
| 1665 | } |
|---|
| 1666 | } |
|---|
| 1667 | foreach file [lsort -dictionary $filelist] { |
|---|
| 1668 | if {![file isdirectory $file]} { |
|---|
| 1669 | set modified [clock format [file mtime $file] -format "%T %D"] |
|---|
| 1670 | $files insert end [file tail $file] |
|---|
| 1671 | $dates insert end $modified |
|---|
| 1672 | } |
|---|
| 1673 | } |
|---|
| 1674 | $expgui(FileDirButtonMenu) delete 0 end |
|---|
| 1675 | set list "" |
|---|
| 1676 | global tcl_version |
|---|
| 1677 | if {$tcl_version > 8.0} { |
|---|
| 1678 | catch {set list [string tolower [file volume]]} |
|---|
| 1679 | } |
|---|
| 1680 | set dir "" |
|---|
| 1681 | foreach subdir [file split [set expgui(FileMenuDir)]] { |
|---|
| 1682 | set dir [string tolower [file join $dir $subdir]] |
|---|
| 1683 | if {[lsearch $list $dir] == -1} {lappend list $dir} |
|---|
| 1684 | } |
|---|
| 1685 | foreach path $list { |
|---|
| 1686 | $expgui(FileDirButtonMenu) add command -label $path \ |
|---|
| 1687 | -command "[list set expgui(FileMenuDir) $path]; \ |
|---|
| 1688 | ChooseWinCnv $frm" |
|---|
| 1689 | } |
|---|
| 1690 | return |
|---|
| 1691 | } |
|---|
| 1692 | |
|---|
| 1693 | #------------------------------------------------------------------------------ |
|---|
| 1694 | # set options for liveplot |
|---|
| 1695 | proc liveplotopt {} { |
|---|
| 1696 | global liveplot expmap |
|---|
| 1697 | set frm .file |
|---|
| 1698 | catch {destroy $frm} |
|---|
| 1699 | toplevel $frm |
|---|
| 1700 | pack [frame [set frmA $frm.1] -bd 2 -relief groove] -padx 3 -pady 3 -side left |
|---|
| 1701 | set last [lindex [lsort -integer $expmap(powderlist)] end] |
|---|
| 1702 | if {$last == ""} {set last 1} |
|---|
| 1703 | pack [scale $frmA.1 -label "Histogram number" -from 1 -to $last \ |
|---|
| 1704 | -length 150 -orient horizontal -variable liveplot(hst)] -side top |
|---|
| 1705 | pack [checkbutton $frmA.2 -text {include plot legend}\ |
|---|
| 1706 | -variable liveplot(legend)] -side top |
|---|
| 1707 | pack [button $frm.2 -text OK \ |
|---|
| 1708 | -command {if ![catch {expr $liveplot(hst)}] "destroy .file"} \ |
|---|
| 1709 | ] -side top |
|---|
| 1710 | bind $frm <Return> {if ![catch {expr $liveplot(hst)}] "destroy .file"} |
|---|
| 1711 | |
|---|
| 1712 | # force the window to stay on top |
|---|
| 1713 | putontop $frm |
|---|
| 1714 | focus $frm.2 |
|---|
| 1715 | tkwait window $frm |
|---|
| 1716 | afterputontop |
|---|
| 1717 | } |
|---|
| 1718 | |
|---|
| 1719 | #------------------------------------------------------------------------------ |
|---|
| 1720 | # get an experiment file name |
|---|
| 1721 | #------------------------------------------------------------------------------ |
|---|
| 1722 | proc getExpFileName {mode} { |
|---|
| 1723 | global expgui tcl_platform |
|---|
| 1724 | set frm .file |
|---|
| 1725 | catch {destroy $frm} |
|---|
| 1726 | toplevel $frm |
|---|
| 1727 | wm title $frm "Experiment file" |
|---|
| 1728 | bind $frm <Key-F1> "MakeWWWHelp expguierr.html open" |
|---|
| 1729 | pack [frame [set frmA $frm.1] -bd 2 -relief groove] -padx 3 -pady 3 -side left |
|---|
| 1730 | pack [frame [set frmC $frm.3] ] -padx 3 -pady 3 -side left \ |
|---|
| 1731 | -fill y -expand yes |
|---|
| 1732 | pack [button $frmC.help -text Help -bg yellow \ |
|---|
| 1733 | -command "MakeWWWHelp expguierr.html open"] \ |
|---|
| 1734 | -side top -anchor e |
|---|
| 1735 | pack [label $frmC.2 -text "Sort .EXP files by" ] -side top |
|---|
| 1736 | pack [radiobutton $frmC.1 -text "File Name" -value 1 \ |
|---|
| 1737 | -variable expgui(filesort) -command "ChooseExpFil $frmA"] -side top |
|---|
| 1738 | pack [radiobutton $frmC.0 -text "Mod. Date" -value 0 \ |
|---|
| 1739 | -variable expgui(filesort) -command "ChooseExpFil $frmA"] -side top |
|---|
| 1740 | |
|---|
| 1741 | set expgui(includearchived) 0 |
|---|
| 1742 | if {$tcl_platform(platform) == "unix" && $mode == "old"} { |
|---|
| 1743 | pack [checkbutton $frmC.ar -text "Include Archived Files" \ |
|---|
| 1744 | -variable expgui(includearchived) \ |
|---|
| 1745 | -command "ChooseExpFil $frmA"] -side top -pady 10 |
|---|
| 1746 | } |
|---|
| 1747 | pack [button $frmC.b -text Read \ |
|---|
| 1748 | -command "valid_exp_file $frmA $mode"] -side bottom |
|---|
| 1749 | if {$mode == "new"} { |
|---|
| 1750 | $frmC.b config -text Save |
|---|
| 1751 | } |
|---|
| 1752 | pack [button $frmC.q -text Quit \ |
|---|
| 1753 | -command "set expgui(FileMenuEXPNAM) {}; destroy $frm"] -side bottom |
|---|
| 1754 | bind $frm <Return> "$frmC.b invoke" |
|---|
| 1755 | |
|---|
| 1756 | if {$mode == "new"} { |
|---|
| 1757 | pack [label $frmA.0 -text "Enter an experiment file to create"] \ |
|---|
| 1758 | -side top -anchor center |
|---|
| 1759 | } else { |
|---|
| 1760 | pack [label $frmA.0 -text "Select an experiment file to read"] \ |
|---|
| 1761 | -side top -anchor center |
|---|
| 1762 | } |
|---|
| 1763 | expfilebox $frmA $mode |
|---|
| 1764 | # force the window to stay on top |
|---|
| 1765 | putontop $frm |
|---|
| 1766 | focus $frmC.b |
|---|
| 1767 | tkwait window $frm |
|---|
| 1768 | afterputontop |
|---|
| 1769 | if {$expgui(FileMenuEXPNAM) == ""} return |
|---|
| 1770 | return [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)] |
|---|
| 1771 | } |
|---|
| 1772 | |
|---|
| 1773 | # validation routine |
|---|
| 1774 | proc valid_exp_file {frm mode} { |
|---|
| 1775 | global expgui tcl_platform |
|---|
| 1776 | # windows fixes |
|---|
| 1777 | if {$tcl_platform(platform) == "windows"} { |
|---|
| 1778 | # change backslashes to something sensible |
|---|
| 1779 | regsub -all {\\} $expgui(FileMenuEXPNAM) / expgui(FileMenuEXPNAM) |
|---|
| 1780 | # allow entry of D: for D:/ and D:TEST for d:/TEST |
|---|
| 1781 | if {[string first : $expgui(FileMenuEXPNAM)] != -1 && \ |
|---|
| 1782 | [string first :/ $expgui(FileMenuEXPNAM)] == -1} { |
|---|
| 1783 | regsub : $expgui(FileMenuEXPNAM) :/ expgui(FileMenuEXPNAM) |
|---|
| 1784 | } |
|---|
| 1785 | } |
|---|
| 1786 | if {$expgui(FileMenuEXPNAM) == "<Parent>"} { |
|---|
| 1787 | set expgui(FileMenuDir) [file dirname [set expgui(FileMenuDir)] ] |
|---|
| 1788 | ChooseExpFil $frm |
|---|
| 1789 | return |
|---|
| 1790 | } elseif [file isdirectory \ |
|---|
| 1791 | [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)]] { |
|---|
| 1792 | if {$expgui(FileMenuEXPNAM) != "."} { |
|---|
| 1793 | set expgui(FileMenuDir) \ |
|---|
| 1794 | [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)] |
|---|
| 1795 | } |
|---|
| 1796 | ChooseExpFil $frm |
|---|
| 1797 | return |
|---|
| 1798 | } |
|---|
| 1799 | # append a .EXP if not present |
|---|
| 1800 | if {[file extension $expgui(FileMenuEXPNAM)] == ""} { |
|---|
| 1801 | append expgui(FileMenuEXPNAM) ".EXP" |
|---|
| 1802 | } |
|---|
| 1803 | # check for archive files |
|---|
| 1804 | if {([string match {*.EXP.[0-9][0-9][0-9].gz} $expgui(FileMenuEXPNAM)] || \ |
|---|
| 1805 | [string match {*.EXP.[0-9][0-9][0-9]} $expgui(FileMenuEXPNAM)]) && \ |
|---|
| 1806 | $tcl_platform(platform) == "unix" && \ |
|---|
| 1807 | $mode == "old" && [file exists $expgui(FileMenuEXPNAM)]} { |
|---|
| 1808 | destroy .file |
|---|
| 1809 | return |
|---|
| 1810 | } elseif {[string toupper [file extension $expgui(FileMenuEXPNAM)]] != ".EXP"} { |
|---|
| 1811 | # check for files that end in something other than .EXP .exp or .Exp... |
|---|
| 1812 | MyMessageBox -parent . -title "File Open Error" \ |
|---|
| 1813 | -message "File [file tail $expgui(FileMenuEXPNAM)] is not a valid name. Experiment files must end in \".EXP\"" \ |
|---|
| 1814 | -icon error |
|---|
| 1815 | return |
|---|
| 1816 | } |
|---|
| 1817 | # check on the file status |
|---|
| 1818 | set file [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)] |
|---|
| 1819 | if {$mode == "new" && [file exists $file]} { |
|---|
| 1820 | set ans [ |
|---|
| 1821 | MyMessageBox -parent . -title "File Open Error" \ |
|---|
| 1822 | -message "File [file tail $file] already exists in [file dirname $file]. OK to overwrite?" \ |
|---|
| 1823 | -icon question -type {"Select other" "Overwrite"} -default "select other" \ |
|---|
| 1824 | -helplink "expguierr.html OverwriteErr" |
|---|
| 1825 | ] |
|---|
| 1826 | if {[string tolower $ans] == "overwrite"} {destroy .file} |
|---|
| 1827 | return |
|---|
| 1828 | } |
|---|
| 1829 | # if file does not exist in case provided, set the name to all |
|---|
| 1830 | # upper case letters, since that is the best choice. |
|---|
| 1831 | # if it does exist, read from it as is. For UNIX we will force uppercase later. |
|---|
| 1832 | if {![file exists $file]} { |
|---|
| 1833 | set expgui(FileMenuEXPNAM) [string toupper $expgui(FileMenuEXPNAM)] |
|---|
| 1834 | set file [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)] |
|---|
| 1835 | } |
|---|
| 1836 | if {$mode == "old" && ![file exists $file]} { |
|---|
| 1837 | set ans [ |
|---|
| 1838 | MyMessageBox -parent . -title "File Open Error" \ |
|---|
| 1839 | -message "File [file tail $file] does not exist in [file dirname $file]. OK to create?" \ |
|---|
| 1840 | -icon question -type {"Select other" "Create"} -default "select other" \ |
|---|
| 1841 | -helplink "expguierr.html OpenErr" |
|---|
| 1842 | ] |
|---|
| 1843 | if {[string tolower $ans] == "create"} {destroy .file} |
|---|
| 1844 | return |
|---|
| 1845 | } |
|---|
| 1846 | destroy .file |
|---|
| 1847 | } |
|---|
| 1848 | |
|---|
| 1849 | proc updir {} { |
|---|
| 1850 | global expgui |
|---|
| 1851 | set expgui(FileMenuDir) [file dirname [set expgui(FileMenuDir)]] |
|---|
| 1852 | } |
|---|
| 1853 | |
|---|
| 1854 | # create a file box |
|---|
| 1855 | proc expfilebox {bx mode} { |
|---|
| 1856 | global expgui |
|---|
| 1857 | pack [frame $bx.top] -side top |
|---|
| 1858 | pack [label $bx.top.a -text "Directory" ] -side left |
|---|
| 1859 | set expgui(FileDirButtonMenu) [tk_optionMenu $bx.top.d expgui(FileMenuDir) [pwd] ] |
|---|
| 1860 | pack $bx.top.d -side left |
|---|
| 1861 | set expgui(FileMenuDir) [pwd] |
|---|
| 1862 | # the icon below is from tk8.0/tkfbox.tcl |
|---|
| 1863 | set upfolder [image create bitmap -data { |
|---|
| 1864 | #define updir_width 28 |
|---|
| 1865 | #define updir_height 16 |
|---|
| 1866 | static char updir_bits[] = { |
|---|
| 1867 | 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x00, 0x00, 0x40, 0x20, 0x00, 0x00, |
|---|
| 1868 | 0x20, 0x40, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x01, 0x10, 0x00, 0x00, 0x01, |
|---|
| 1869 | 0x10, 0x02, 0x00, 0x01, 0x10, 0x07, 0x00, 0x01, 0x90, 0x0f, 0x00, 0x01, |
|---|
| 1870 | 0x10, 0x02, 0x00, 0x01, 0x10, 0x02, 0x00, 0x01, 0x10, 0x02, 0x00, 0x01, |
|---|
| 1871 | 0x10, 0xfe, 0x07, 0x01, 0x10, 0x00, 0x00, 0x01, 0x10, 0x00, 0x00, 0x01, |
|---|
| 1872 | 0xf0, 0xff, 0xff, 0x01};}] |
|---|
| 1873 | |
|---|
| 1874 | pack [button $bx.top.b -image $upfolder \ |
|---|
| 1875 | -command "updir; ChooseExpFil $bx" ] |
|---|
| 1876 | pack [frame $bx.a -width 200 -height 75] -side top -expand yes -fill both |
|---|
| 1877 | listbox $bx.a.files -relief raised -bd 2 \ |
|---|
| 1878 | -yscrollcommand "sync2boxes $bx.a.files $bx.a.dates $bx.a.scroll" \ |
|---|
| 1879 | -height 15 -width 0 -exportselection 0 |
|---|
| 1880 | listbox $bx.a.dates -relief raised -bd 2 \ |
|---|
| 1881 | -yscrollcommand "sync2boxes $bx.a.dates $bx.a.files $bx.a.scroll" \ |
|---|
| 1882 | -height 15 -width 0 -takefocus 0 -exportselection 0 |
|---|
| 1883 | scrollbar $bx.a.scroll -command "move2boxesY \" $bx.a.files $bx.a.dates \" " |
|---|
| 1884 | ChooseExpFil $bx |
|---|
| 1885 | bind $bx.a.files <ButtonRelease-1> "ReleaseExpFil $bx" |
|---|
| 1886 | bind $bx.a.dates <ButtonRelease-1> "ReleaseExpFil $bx" |
|---|
| 1887 | bind $bx.a.files <Double-1> "SelectExpFil $bx $mode" |
|---|
| 1888 | bind $bx.a.dates <Double-1> "SelectExpFil $bx $mode" |
|---|
| 1889 | pack $bx.a.scroll -side left -fill y |
|---|
| 1890 | pack $bx.a.files $bx.a.dates -side left -fill both -expand yes |
|---|
| 1891 | pack [entry $bx.c -textvariable expgui(FileMenuEXPNAM)] -side top |
|---|
| 1892 | } |
|---|
| 1893 | proc sync2boxes {master slave scroll args} { |
|---|
| 1894 | $slave yview moveto [lindex [$master yview] 0] |
|---|
| 1895 | eval $scroll set $args |
|---|
| 1896 | } |
|---|
| 1897 | proc move2boxesY {boxlist args} { |
|---|
| 1898 | foreach listbox $boxlist { |
|---|
| 1899 | eval $listbox yview $args |
|---|
| 1900 | } |
|---|
| 1901 | } |
|---|
| 1902 | |
|---|
| 1903 | # set the box or file in the selection window |
|---|
| 1904 | proc ReleaseExpFil {frm} { |
|---|
| 1905 | global expgui |
|---|
| 1906 | set files $frm.a.files |
|---|
| 1907 | set dates $frm.a.dates |
|---|
| 1908 | set select [$files curselection] |
|---|
| 1909 | if {$select == ""} { |
|---|
| 1910 | set select [$dates curselection] |
|---|
| 1911 | } |
|---|
| 1912 | if {$select == ""} { |
|---|
| 1913 | set expgui(FileMenuEXPNAM) "" |
|---|
| 1914 | } else { |
|---|
| 1915 | set expgui(FileMenuEXPNAM) [string trim [$files get $select]] |
|---|
| 1916 | } |
|---|
| 1917 | if {$expgui(FileMenuEXPNAM) == "<Parent>"} { |
|---|
| 1918 | set expgui(FileMenuDir) [file dirname $expgui(FileMenuDir)] |
|---|
| 1919 | ChooseExpFil $frm |
|---|
| 1920 | } elseif [file isdirectory \ |
|---|
| 1921 | [file join [set expgui(FileMenuDir)] $expgui(FileMenuEXPNAM)]] { |
|---|
| 1922 | if {$expgui(FileMenuEXPNAM) != "."} { |
|---|
| 1923 | set expgui(FileMenuDir) [file join $expgui(FileMenuDir) $expgui(FileMenuEXPNAM)] |
|---|
| 1924 | ChooseExpFil $frm |
|---|
| 1925 | } |
|---|
| 1926 | } |
|---|
| 1927 | return |
|---|
| 1928 | } |
|---|
| 1929 | |
|---|
| 1930 | # select a file or directory -- called on double click |
|---|
| 1931 | proc SelectExpFil {frm mode} { |
|---|
| 1932 | global expgui |
|---|
| 1933 | set files $frm.a.files |
|---|
| 1934 | set dates $frm.a.dates |
|---|
| 1935 | set select [$files curselection] |
|---|
| 1936 | if {$select == ""} { |
|---|
| 1937 | set select [$dates curselection] |
|---|
| 1938 | } |
|---|
| 1939 | if {$select == ""} { |
|---|
| 1940 | set file . |
|---|
| 1941 | } else { |
|---|
| 1942 | set file [string trim [$files get $select]] |
|---|
| 1943 | } |
|---|
| 1944 | if {$file == "<Parent>"} { |
|---|
| 1945 | set expgui(FileMenuDir) [file dirname [set expgui(FileMenuDir)] ] |
|---|
| 1946 | ChooseExpFil $frm |
|---|
| 1947 | } elseif [file isdirectory [file join [set expgui(FileMenuDir)] $file]] { |
|---|
| 1948 | if {$file != "."} { |
|---|
| 1949 | set expgui(FileMenuDir) [file join [set expgui(FileMenuDir)] $file] |
|---|
| 1950 | ChooseExpFil $frm |
|---|
| 1951 | } |
|---|
| 1952 | } else { |
|---|
| 1953 | set expgui(FileMenuEXPNAM) [file tail $file] |
|---|
| 1954 | valid_exp_file $frm $mode |
|---|
| 1955 | } |
|---|
| 1956 | } |
|---|
| 1957 | |
|---|
| 1958 | # fill the files & dates & Directory selection box with current directory, |
|---|
| 1959 | # also called when box is created to fill it |
|---|
| 1960 | proc ChooseExpFil {frm} { |
|---|
| 1961 | global expgui |
|---|
| 1962 | set files $frm.a.files |
|---|
| 1963 | set dates $frm.a.dates |
|---|
| 1964 | set expgui(FileMenuEXPNAM) {} |
|---|
| 1965 | $files delete 0 end |
|---|
| 1966 | $dates delete 0 end |
|---|
| 1967 | $files insert end {<Parent>} |
|---|
| 1968 | $dates insert end {(Directory)} |
|---|
| 1969 | set filelist [glob -nocomplain \ |
|---|
| 1970 | [file join [set expgui(FileMenuDir)] *] ] |
|---|
| 1971 | foreach file [lsort -dictionary $filelist] { |
|---|
| 1972 | if {[file isdirectory $file]} { |
|---|
| 1973 | $files insert end [file tail $file] |
|---|
| 1974 | $dates insert end {(Directory)} |
|---|
| 1975 | } |
|---|
| 1976 | } |
|---|
| 1977 | set pairlist {} |
|---|
| 1978 | foreach file [lsort -dictionary $filelist] { |
|---|
| 1979 | if {![file isdirectory $file] && \ |
|---|
| 1980 | [string toupper [file extension $file]] == ".EXP"} { |
|---|
| 1981 | set modified [file mtime $file] |
|---|
| 1982 | lappend pairlist [list $file $modified] |
|---|
| 1983 | } elseif {![file isdirectory $file] && $expgui(includearchived) && \ |
|---|
| 1984 | ([string match {*.EXP.[0-9][0-9][0-9].gz} $file] ||\ |
|---|
| 1985 | [string match {*.EXP.[0-9][0-9][0-9]} $file])} { |
|---|
| 1986 | set modified [file mtime $file] |
|---|
| 1987 | lappend pairlist [list $file $modified] |
|---|
| 1988 | } |
|---|
| 1989 | } |
|---|
| 1990 | if {$expgui(filesort) == 0} { |
|---|
| 1991 | foreach pair [lsort -index 1 -integer $pairlist] { |
|---|
| 1992 | set file [lindex $pair 0] |
|---|
| 1993 | set modified [clock format [lindex $pair 1] -format "%T %D"] |
|---|
| 1994 | $files insert end [file tail $file] |
|---|
| 1995 | $dates insert end $modified |
|---|
| 1996 | } |
|---|
| 1997 | } else { |
|---|
| 1998 | foreach pair [lsort -dictionary -index 0 $pairlist] { |
|---|
| 1999 | set file [lindex $pair 0] |
|---|
| 2000 | set modified [clock format [lindex $pair 1] -format "%T %D"] |
|---|
| 2001 | $files insert end [file tail $file] |
|---|
| 2002 | $dates insert end $modified |
|---|
| 2003 | } |
|---|
| 2004 | } |
|---|
| 2005 | $expgui(FileDirButtonMenu) delete 0 end |
|---|
| 2006 | set list "" |
|---|
| 2007 | global tcl_platform tcl_version |
|---|
| 2008 | if {$tcl_platform(platform) == "windows" && $tcl_version > 8.0} { |
|---|
| 2009 | catch {set list [string tolower [file volume]]} |
|---|
| 2010 | } |
|---|
| 2011 | set dir "" |
|---|
| 2012 | foreach subdir [file split [set expgui(FileMenuDir)]] { |
|---|
| 2013 | set dir [file join $dir $subdir] |
|---|
| 2014 | if {$tcl_platform(platform) == "windows"} { |
|---|
| 2015 | set dir [string tolower $dir] |
|---|
| 2016 | if {[lsearch $list $dir] == -1} {lappend list $dir} |
|---|
| 2017 | } else { |
|---|
| 2018 | lappend list $dir |
|---|
| 2019 | } |
|---|
| 2020 | } |
|---|
| 2021 | foreach path $list { |
|---|
| 2022 | $expgui(FileDirButtonMenu) add command -label $path \ |
|---|
| 2023 | -command "[list set expgui(FileMenuDir) $path]; \ |
|---|
| 2024 | ChooseExpFil $frm" |
|---|
| 2025 | } |
|---|
| 2026 | # highlight the current experiment -- if present |
|---|
| 2027 | for {set i 0} {$i < [$files size]} {incr i} { |
|---|
| 2028 | set file [$files get $i] |
|---|
| 2029 | if {$expgui(expfile) == [file join $expgui(FileMenuDir) $file]} { |
|---|
| 2030 | $files selection set $i |
|---|
| 2031 | } |
|---|
| 2032 | } |
|---|
| 2033 | return |
|---|
| 2034 | } |
|---|
| 2035 | |
|---|
| 2036 | |
|---|
| 2037 | #------------------------------------------------------------------------------ |
|---|
| 2038 | # platform-specific definitions |
|---|
| 2039 | if {$tcl_platform(platform) == "windows" && $tcl_platform(os) == "Windows 95"} { |
|---|
| 2040 | # windows-95, -98 and presumably -me do not allow Tcl/Tk to run the |
|---|
| 2041 | # DOS box synchronously, so we create a "lock" file that is deleted |
|---|
| 2042 | # at the end of the DOS run so we can tell when the run is done. |
|---|
| 2043 | # We create a window to force the deleting of the file so that if |
|---|
| 2044 | # the DOS process crashes, the user can continue anyway. |
|---|
| 2045 | # |
|---|
| 2046 | # procedure to check if the lock file is still there (Win-9x/me only) |
|---|
| 2047 | proc checklockfile {file window} { |
|---|
| 2048 | if [file exists $file] { |
|---|
| 2049 | after 500 checklockfile $file $window |
|---|
| 2050 | } else { |
|---|
| 2051 | catch {destroy $window} |
|---|
| 2052 | } |
|---|
| 2053 | } |
|---|
| 2054 | # this creates a DOS box to run a program in |
|---|
| 2055 | proc forknewterm {title command "wait 1" "scrollbar 1"} { |
|---|
| 2056 | global env expgui |
|---|
| 2057 | # Windows environment variables |
|---|
| 2058 | set env(GSAS) [file nativename $expgui(gsasdir)] |
|---|
| 2059 | # PGPLOT_FONT is needed by PGPLOT |
|---|
| 2060 | set env(PGPLOT_FONT) [file nativename [file join $expgui(gsasdir) pgl grfont.dat]] |
|---|
| 2061 | # this is the number of lines/page in the .LST (etc.) file |
|---|
| 2062 | set env(LENPAGE) 60 |
|---|
| 2063 | set pwd [file nativename [pwd]] |
|---|
| 2064 | |
|---|
| 2065 | # check the .EXP path -- can DOS use it? |
|---|
| 2066 | if {[string first // [pwd]] != -1} { |
|---|
| 2067 | MyMessageBox -parent . -title "Invalid Path" \ |
|---|
| 2068 | -message {Error -- Use "Map network drive" to access this directory with a letter (e.g. F:) GSAS can't directly access a network drive} \ |
|---|
| 2069 | -icon error -type ok -default ok \ |
|---|
| 2070 | -helplink "expgui_Win_readme.html NetPath" |
|---|
| 2071 | return |
|---|
| 2072 | } |
|---|
| 2073 | # pause is hard coded in the .BAT file |
|---|
| 2074 | # |
|---|
| 2075 | # loop over multiple commands |
|---|
| 2076 | foreach cmd $command { |
|---|
| 2077 | # simulate the wait with a lock file |
|---|
| 2078 | if {$wait} { |
|---|
| 2079 | if {$expgui(autoiconify)} {wm iconify .} |
|---|
| 2080 | # create a blank lock file and a message window |
|---|
| 2081 | close [open expgui.lck w] |
|---|
| 2082 | toplevel .lock |
|---|
| 2083 | grid [button .lock.0 -text Help -bg yellow \ |
|---|
| 2084 | -command "MakeWWWHelp expguierr.html lock"] \ |
|---|
| 2085 | -column 1 -row 0 |
|---|
| 2086 | grid [label .lock.1 \ |
|---|
| 2087 | -text "Please wait while the GSAS program finishes."] \ |
|---|
| 2088 | -column 0 -row 0 |
|---|
| 2089 | grid [label .lock.2 -text \ |
|---|
| 2090 | "In case a problem occurs, close the DOS box"] \ |
|---|
| 2091 | -column 0 -columnspan 2 -row 1 |
|---|
| 2092 | grid [label .lock.3 -text \ |
|---|
| 2093 | "and press the \"Continue\" button (below)"] \ |
|---|
| 2094 | -column 0 -columnspan 2 -row 2 |
|---|
| 2095 | grid [button .lock.b -text "Continue" \ |
|---|
| 2096 | -command "destroy .lock; wm deiconify ."] \ |
|---|
| 2097 | -column 0 -columnspan 2 -row 3 |
|---|
| 2098 | putontop .lock |
|---|
| 2099 | update |
|---|
| 2100 | checklockfile expgui.lck .lock |
|---|
| 2101 | } |
|---|
| 2102 | # replace the forward slashes with backward |
|---|
| 2103 | regsub -all / $cmd \\ cmd |
|---|
| 2104 | winexec -d [file nativename [pwd]] \ |
|---|
| 2105 | [file join $expgui(scriptdir) gsastcl.bat] $cmd |
|---|
| 2106 | if {$wait} { |
|---|
| 2107 | tkwait window .lock |
|---|
| 2108 | file delete -force expgui.lck |
|---|
| 2109 | } |
|---|
| 2110 | } |
|---|
| 2111 | if {$expgui(autoiconify) && $wait} {wm deiconify .} |
|---|
| 2112 | # check for changes in the .EXP file immediately |
|---|
| 2113 | whenidle |
|---|
| 2114 | } |
|---|
| 2115 | } elseif {$tcl_platform(platform) == "windows"} { |
|---|
| 2116 | # now for Windows-NT, where we can run synchronously |
|---|
| 2117 | # |
|---|
| 2118 | # this creates a DOS box to run a program in |
|---|
| 2119 | proc forknewterm {title command "wait 1" "scrollbar 1"} { |
|---|
| 2120 | global env expgui |
|---|
| 2121 | # Windows environment variables |
|---|
| 2122 | set env(GSAS) [file nativename $expgui(gsasdir)] |
|---|
| 2123 | # PGPLOT_FONT is needed by PGPLOT |
|---|
| 2124 | set env(PGPLOT_FONT) [file nativename [file join $expgui(gsasdir) pgl grfont.dat]] |
|---|
| 2125 | # this is the number of lines/page in the .LST (etc.) file |
|---|
| 2126 | set env(LENPAGE) 60 |
|---|
| 2127 | set pwd [file nativename [pwd]] |
|---|
| 2128 | # check the path -- can DOS use it? |
|---|
| 2129 | if {[string first // [pwd]] != -1} { |
|---|
| 2130 | MyMessageBox -parent . -title "Invalid Path" \ |
|---|
| 2131 | -message {Error -- Use "Map network drive" to access this directory with a letter (e.g. F:) GSAS can't directly access a network drive} \ |
|---|
| 2132 | -icon error -type ok -default ok \ |
|---|
| 2133 | -helplink "expgui_Win_readme.html NetPath" |
|---|
| 2134 | return |
|---|
| 2135 | } |
|---|
| 2136 | # pause is hard coded in the .BAT file |
|---|
| 2137 | |
|---|
| 2138 | if {$wait} { |
|---|
| 2139 | if {$expgui(autoiconify)} {wm iconify .} |
|---|
| 2140 | # create a blank lock file (keep liveplot from running) |
|---|
| 2141 | close [open expgui.lck w] |
|---|
| 2142 | # loop over commands |
|---|
| 2143 | foreach cmd $command { |
|---|
| 2144 | # replace the forward slashes with backward |
|---|
| 2145 | regsub -all / $cmd \\ cmd |
|---|
| 2146 | exec $env(COMSPEC) /c \ |
|---|
| 2147 | "start [file join $expgui(scriptdir) gsastcl.bat] $cmd" |
|---|
| 2148 | } |
|---|
| 2149 | file delete -force expgui.lck |
|---|
| 2150 | if {$expgui(autoiconify)} {wm deiconify .} |
|---|
| 2151 | # check for changes in the .EXP file immediately |
|---|
| 2152 | whenidle |
|---|
| 2153 | } else { |
|---|
| 2154 | # loop over commands |
|---|
| 2155 | foreach cmd $command { |
|---|
| 2156 | # replace the forward slashes with backward |
|---|
| 2157 | regsub -all / $cmd \\ cmd |
|---|
| 2158 | # run in background |
|---|
| 2159 | exec $env(COMSPEC) /c \ |
|---|
| 2160 | "start [file join $expgui(scriptdir) gsastcl.bat] $cmd" & |
|---|
| 2161 | } |
|---|
| 2162 | } |
|---|
| 2163 | } |
|---|
| 2164 | } else { |
|---|
| 2165 | # this creates a xterm window to run a program in |
|---|
| 2166 | proc forknewterm {title command "wait 1" "scrollbar 1"} { |
|---|
| 2167 | global env expgui |
|---|
| 2168 | # UNIX environment variables |
|---|
| 2169 | set env(GSAS) [file nativename $expgui(gsasdir)] |
|---|
| 2170 | set env(gsas) [file nativename $expgui(gsasdir)] |
|---|
| 2171 | set env(GSASEXE) $expgui(gsasexe) |
|---|
| 2172 | set env(ATOMDATA) [file join $expgui(gsasdir) data atmdata.dat] |
|---|
| 2173 | set env(ATMXSECT) [file join $expgui(gsasdir) data atmxsect.dat] |
|---|
| 2174 | # PGPLOT_DIR is needed by PGPLOT |
|---|
| 2175 | set env(PGPLOT_DIR) [file join $expgui(gsasdir) pgl] |
|---|
| 2176 | # this is the number of lines/page in the .LST (etc.) file |
|---|
| 2177 | set env(LENPAGE) 60 |
|---|
| 2178 | set termopts {} |
|---|
| 2179 | if $env(GSASBACKSPACE) { |
|---|
| 2180 | append termopts \ |
|---|
| 2181 | {-xrm "xterm*VT100.Translations: #override\\n <KeyPress>BackSpace: string(\\177)"} |
|---|
| 2182 | } |
|---|
| 2183 | if $scrollbar { |
|---|
| 2184 | append termopts " -sb" |
|---|
| 2185 | } else { |
|---|
| 2186 | append termopts " +sb" |
|---|
| 2187 | } |
|---|
| 2188 | if {$wait} { |
|---|
| 2189 | set suffix {} |
|---|
| 2190 | } else { |
|---|
| 2191 | set suffix {&} |
|---|
| 2192 | } |
|---|
| 2193 | # |
|---|
| 2194 | #if $wait { |
|---|
| 2195 | append command "\; echo -n Press Enter to continue \; read x" |
|---|
| 2196 | #} |
|---|
| 2197 | if {$wait && $expgui(autoiconify)} {wm iconify .} |
|---|
| 2198 | catch {eval exec xterm $termopts -title [list $title] \ |
|---|
| 2199 | -e /bin/sh -c [list $command] $suffix} errmsg |
|---|
| 2200 | if $expgui(debug) {puts "xterm result = $errmsg"} |
|---|
| 2201 | if {$wait && $expgui(autoiconify)} {wm deiconify .} |
|---|
| 2202 | } |
|---|
| 2203 | } |
|---|
