source: trunk/doc/expgui5.html @ 246

Last change on this file since 246 was 246, checked in by toby, 11 years ago

# on 2000/07/28 20:18:20, toby did:
document change in profile button

  • Property rcs:author set to toby
  • Property rcs:date set to 2000/07/28 20:18:20
  • Property rcs:lines set to +21 -2
  • Property rcs:rev set to 1.2
  • Property rcs:state set to Exp
  • Property svn:keywords set to Author Date Revision Id
File size: 2.6 KB
Line 
1<html>
2<head>
3   <META NAME="Author" CONTENT="Brian H. Toby">
4   <title>EXPGUI</title>
5</head>
6<BODY BGCOLOR="#FFFFFF">
7
8<A HREF=http://www.ncnr.nist.gov>
9<IMG SRC="http://www.ncnr.nist.gov/images/ncnrtrans.gif" 
10alt="Link to NIST Center for Neutron Research home page"
11ALIGN=RIGHT></A>
12<A HREF=http://www.nist.gov>
13<IMG SRC="http://www.ncnr.nist.gov/images/webidblue_2lineright.gif" 
14alt="Link to National Institute of Standards & Technology home page"
15ALIGN=LEFT></A>
16<CENTER>
17<A Href="http://www.ncnr.nist.gov/programs/crystallography/software/tclpkgs.html">
18<IMG SRC="tcltklogo100.gif" 
19alt="Link to Tcl/Tk information">
20</CENTER></A>
21<hr>
22
23<center><h1>
24EXPGUI
25</h1></center>
26<A Href="expgui.html">EXPGUI top</A>
27<h3>A.5 Profile pane</h3> 
28<DL><DL>
29The Profile pane is used to edit the profile values as well as
30their refinement flags and damping value.
31Note that there will be a set of profile parameters for each
32phase present in each histogram.
33<IMG SRC="new.gif" HEIGHT=13 WIDTH=36>
34The "Change Type" button is used to select a new profile type for one
35or more histogram/phase combinations.
36<P>
37If
38<A href="expgui.html#multiplehistogram">
39"Multiple Histogram Selection" mode</A> is set to "All",
40this pane is disabled. For other settings of this mode,
41profile values and settings can be collectively
42modified for groups of histograms.
43<P>
44Note that the order that histograms appear in this
45pane is determined by the
46<a href="expguic.html#sorthist">"Sort histograms by"</a> option in
47the Options Menu.
48</DL></DL>
49<img SRC="5.gif" align=TEXTTOP>
50<DL><DL>
51When more than one phase is present in the histogram,
52the profiles for all phases are shown.
53</DL></DL>
54<img SRC="5a.gif" align=TEXTTOP>
55<DL><DL>
56
57Pressing the "Change Type" button causes a window like the one below to
58be displayed.
59<P><img SRC="5b.gif" align=TEXTTOP><BR><P>
60Note that the default profile values are taken from the instrument parameter
61file (in the example above, a profile was selected where no
62such default values were defined and the current values (where appropriate)
63are taken from the current profile function. Through use of the appropriate
64buttons, selected values can be retained from the current profile when
65the function is changed or can be reset to default values. This latter
66capability can be useful even when not changing the profile type, if the
67profile terms have refined into a false minimum.
68
69
70</DL></DL><hr>
71<A Href="expgui.html">EXPGUI top</A>
72
73<p><a href="http://www.ncnr.nist.gov/staff/toby/">Brian Toby</a> (<a href="mailto:brian.toby@nist.gov">Brian.Toby@NIST.GOV</a>)
74<br>
75$Revision: 246 $ $Date: 2009-12-04 23:02:50 +0000 (Fri, 04 Dec 2009) $
76</body>
77</html>
Note: See TracBrowser for help on using the repository browser.